________________________________________________________________________________________
John Deere 2510 Maintenance
The
John Deere 2510 is a two-wheel drive row-crop tractor. This model was
manufactured between 1965 and 1968. The John Deere 2510 tractor is powered by
202.7 cubic inches four-cylinder valve-in-head diesel engine with a maximum
power of 53 Hp (39.3 kW) at 2500 rev/min, or 180.4 cubic inches 4-cylinder
8-valve gasoline engine.
The John Deere 2510 is fitted with two types of transmission. Type 1:
8x2 Syncro range partially synchronized transmission. Type 2: Full Power
shift transmission with 8 forward and 4 reverse gears.
The maximum forward speed - 17.5 mph (28.1 km/h), max. reverse speed -
4.7 mph (7.5 km/h). The closed center constant pressure hydraulic system
used a piston pump with rated capacity of 12.4 gpm (47 lpm). The main
relief pressure is 155 bar (2250 psi). The John Deere 2510 is equipped
with 6.00x16 front tyres and 13.6x38 rear tyres. The wheelbase is 90
inches (2280 mm). The tractor is compatible with a John Deere 48 front
end loader with a lifting capacity to maximum height of 2400 lbs (1088
kg), and breakout force of 3600 lbs (1632 kg).
Engine oil capacity, gal (L) |
1.85 (7.0) |
Engine coolant capacity, gal (L) |
3.7 (14.0) |
Hydraulic system capacity (Syncro-range transmission), gal (L) |
8.0 (30.3) |
Hydraulic system capacity (Power-shift transmission), gal (L) |
11.0 (41.6) |
Belt pulley oil capacity, qts (L) |
1.3 (1.2) |
Final drive housing capacity (Hi-crop), qts (L) |
1.75 (1.65) |
Recommended Oil and Fluid |
Engine oil type |
Torq-Gard, SAE 30, SAE 10W-30, 20W-40. API Service category MS, DM |
Engine coolant type |
Cool-Gard Premix Coolant |
Hydraulic/Transmission fluid type |
JD 303 Special-Purpose Oil |
Belt pulley oil type |
JD 303 Special-Purpose Oil |
Final drive housing capacity oil type (Hi-crop) |
Gear Lubricant SAE 80, SAE 90 |
Check hydraulic/transmission fluid level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Change engine oil |
Every 200 hours |
Replace engine oil filter |
Every 200 hours |
Inspect and adjust fan belt |
Every 200 hours |
Check belt pulley oil level |
Every 200 hours |
Check final drive housing oil level (Hi-crop) |
Every 200 hours |
Clean air cleaner oil cup or dry element |
Every 200 hours |
Clean battery and check electrolyte level |
Every 200 hours |
Change engine fuel filter (diesel) |
Every 600 hours |
Clean carburetor strainer screen (gasoline) |
Every 600 hours |
Check injection timing (diesel) |
Every 600 hours |
Clean or replace spark plug (gasoline) |
Every 600 hours |
Replace hydraulic/transmission oil filter |
Every 600 hours |
Change belt pulley oil |
Every 600 hours |
Check and adjust engine idling |
Every 600 hours |
Check and adjust valve clearance |
Every 600 hours |
Change hydraulic/transmission fluid |
Every 1200 hours |
Replace air cleaner dry element |
Every 1200 hours |
Clean and adjust wheel bearings |
Every 1200 hours |
Clean hydraulic pump valve filter |
Every 1200 hours |
Change final drive housing oil (Hi-crop) |
Every 1200 hours |
Flush cooling system and add new coolant |
Every 1500 hours |
Engine oil filter part number |
T19044 |
Engine fuel filter part number |
AT17387 (diesel) |
Engine air cleaner part number |
AH19848 |
Hydraulic/transmission oil filter part number |
AR75603 |
Hydraulic oil filter part number |
R34236 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |