________________________________________________________________________________________
John Deere 2520 Compact Tractor
The
John Deere 2520 is a 4WD (4x4) compact utility tractor from 2000 Twenty series.
This model was manufactured between 2006 and 2012. The John Deere 2520 driveline
system components: a 81.2 cu.in (1.3 L) Yanmar 3TNV82A 4-cycle vertical in-line
3-cylinder direct injection naturally aspirated liquid-cooled diesel engine with
a maximum power of 26.4 hp (19.7 kW), and two-range hydrostatic transmission
with infinite forward and reverse gears.
Max forward speed - 13.4 mph (21.5 km/h), maximum reverse speed - 13 mph
(20.9 km/h). The open center hydraulic system includes a gear pump with
rated fluid flow of 5 gal/min (19 l/min). The hydraulic pressure is 167
bar (2420 psi). The tractor is equipped with a power steering system,
wet disc brakes, 24x8.5-14 (Turf) or 23x8.50-14 (Industrial) front
tires, and 36x14.00-15 (Turf) or 14-17.5 (Industrial) rear tires. The
wheelbase is 65.2" (1650 mm).
The John Deere 2520 is compatible with the following attachments: 62" or
72" mid-mount 3-blade mower decks with cutting height of 1.0-6.0"
(25-152 mm) and hydraulic lift system, John Deere 200CX front-end loader
with lift capacity to full height of 902 lbs (409 kg), and John Deere 46
backhoe with 2-ft flat digging depth of 78" (1980 mm).
Engine Model |
Yanmar 3TNV82A |
Engine Type |
4-cycle vertical in-line 3-cylinder direct injection liquid-cooled diesel |
Number of Cylinders |
3 |
Displacement, cu in (L) |
81.2 (1.33) |
Engine Bore, in (mm) |
3.23 (82.0) |
Engine Stroke, in (mm) |
3.31 (84.0) |
Aspiration |
Naturally aspirated |
Maximum Engine Power, hp (kW) |
26.4 (19.7) |
Rated Engine Speed, rpm |
2600 |
Low Idle Speed, rpm |
1500 |
High Idle Speed, rpm |
3180 |
Compression Ratio |
19.2:1 |
Firing Order |
1-3-2 |
Fuel System |
Direct injection |
Fuel Filter |
Replaceable element |
Fuel Injection Pump |
Mechanical, in-line type |
Lubrication System |
Forced lubrication with trochoid pump |
Oil Filter Type |
Single element |
Air Cleaner |
Dual dry element |
Fuel Tank Capacity, gal (L) |
7.1 (27.0) |
Oil Capacity, qts (L) |
3.8 (3.6) |
Coolant Capacity, qts (L) |
4.1 (3.9) |
Electrical System Rating, Volts |
12 |
Charging System |
Alternator |
Alternator Rating, Amps |
20 |
PTO Operational Type |
Independent |
PTO Horsepower, hp (kW) |
20.5 (15.3) |
Rear PTO Speed, rpm |
540 |
Rear PTO / Engine Speed, rpm |
540/2600 |
Mid PTO Speed, rpm |
2100 |
Mid PTO / Engine Speed, rpm |
2100/3000 |
Transmission Type |
Hydrostatic |
Number of Forward Gears |
Infinite (2-range) |
Number of Reverse Gears |
Infinite (2-range) |
Oil Capacity, qts (L) |
15.4 (14.6) |
Maximum Forward Speed (Low Range), mph (kph) |
4.5 (7.2) |
Maximum Forward Speed (High Range), mph (kph) |
13.4 (21.5) |
Maximum Reverse Speed (Low Range), mph (kph) |
4.5 (7.2) |
Maximum Reverse Speed (High Range), mph (kph) |
13.0 (20.9) |
Drive Wheels |
4WD 4x4 |
Steering Configuration |
Front steer |
Steering System |
Power Steering |
Brakes Type |
Wet disc |
Front Tire Size (Turf) |
24x8.5-14 |
Rear Tire Size (Turf) |
36x14.00-15 |
Front Tire Size (Industrial) |
23x8.50-14 |
Rear Tire Size (Industrial) |
14-17.5 |
Front Tread, in (mm) |
32.7 (830) |
Rear Tread, in (mm) |
37.6 (950) |
Hydraulic System Type |
Open center |
Implement Pump Type |
Gear |
Implement Pump Flow, gpm (Lpm) |
5.0 (19.0) |
Steering Pump Flow, gpm (Lpm) |
5.5 (20.9) |
Hydraulic Pressure, Bar (psi) |
167 (2420) |
Hydraulic Fluid Capacity, gal (L) |
3.9 (14.7) |
Number of Standard Remote Valves |
2 |
3-Point Hitch Category |
1 |
Draft Sensing or Lift Control |
Position control |
Lift Capacity at 24" (610mm) behind pin, lb (kg) |
520 (1150) |
Lift Capacity at pin, lb (kg) |
1435 (650) |
Wheelbase, in (mm) |
65.2 (1650) |
Overall Length, in (mm) |
108.9 (2760) |
Height (Hood), in (mm) |
47.2 (1190) |
Height (ROPS), in (mm) |
89.7 (2270) |
Overall Width, in (mm) |
52.6 (1330) |
Ground Clearance, in (mm) |
12.5 (310) |
Turning Radius (w/o Brakes), in (mm) |
98.4 (2500) |
Weight, lb (kg) |
1865 (845) |
Loader Model |
John Deere 200CX |
Maximum Lift Height at Pin, in (mm) |
78.5 (1990) |
Clearance with Dumped Bucket, in (mm) |
72.2 (1830) |
Reach at Maximum Height, in (mm) |
29.5 (740) |
Maximum Dump Angle, deg |
38 |
Maximum Rollback Angle, deg |
25 |
Lift Capacity to Max Height at Pin, lbs (kg) |
902 (410) |
Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
630 (285) |
Breakout Force at Pivot Pin, lbs (kg) |
2240 (1015) |
Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
1515 (687) |
Bucket Width, in (mm) |
53 (1345) |
Mower Deck Model |
John Deere 62D2 |
Mower Deck Type |
Mid-mount |
Number of Blades |
3 |
Cutting Width, in (mm) |
62 (1570) |
Overall Width, in (mm) |
75.3 (1910) |
Cutting Height, in (mm) |
1.0-6.0 (25-152) |
Lift System |
Hydraulic |
Weight, lb (kg) |
275 (124) |
Mower Deck Model |
John Deere 72 |
Mower Deck Type |
Mid-mount |
Number of Blades |
3 |
Cutting Width, in (mm) |
72 (1820) |
Overall Width, in (mm) |
85 (2150) |
Cutting Height, in (mm) |
1.0-9.0 (25-228) |
Lift System |
Hydraulic |
Weight, lb (kg) |
406 (184) |
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |