________________________________________________________________________________________
John Deere 2520 Maintenance
The
John Deere 2520 is a 4WD (4x4) compact utility tractor from 2000 Twenty series.
This model was manufactured between 2006 and 2012. The John Deere 2520 driveline
system components: a 81.2 cu.in (1.3 L) Yanmar 3TNV82A 4-cycle vertical in-line
3-cylinder direct injection naturally aspirated liquid-cooled diesel engine with
a maximum power of 26.4 hp (19.7 kW), and two-range hydrostatic transmission
with infinite forward and reverse gears.
Max forward speed - 13.4 mph (21.5 km/h), maximum reverse speed - 13 mph
(20.9 km/h). The open center hydraulic system includes a gear pump with
rated fluid flow of 5 gal/min (19 l/min). The hydraulic pressure is 167
bar (2420 psi). The tractor is equipped with a power steering system,
wet disc brakes, 24x8.5-14 (Turf) or 23x8.50-14 (Industrial) front
tires, and 36x14.00-15 (Turf) or 14-17.5 (Industrial) rear tires. The
wheelbase is 65.2" (1650 mm).
The John Deere 2520 is compatible with the following attachments: 62" or
72" mid-mount 3-blade mower decks with cutting height of 1.0-6.0"
(25-152 mm) and hydraulic lift system, John Deere 200CX front-end loader
with lift capacity to full height of 902 lbs (409 kg), and John Deere 46
backhoe with 2-ft flat digging depth of 78" (1980 mm).
Engine oil capacity, gal (L) |
0.95 (3.6) |
Engine coolant capacity, gal (L) |
1.05 (3.9) |
Hydraulic system capacity, gal (L) |
3.9 (14.6) |
Front axle oil capacity, gal (L) |
0.90 (3.4) |
Recommended Oil and Fluid |
Engine oil type |
Plus-50, Torq-Gard, SAE 10W-30, 5W-30. API Service Category CH-4, CI-4 |
Engine coolant type |
Cool-Gard Premix or Cool-Gard Prediluted |
Hydraulic/transmission fluid type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
Front axle oil type |
GL-5 Gear Lubricant, SAE 80W-90 |
Check battery and clean terminals |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Check fluid level in hydraulic system |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Change engine oil |
Every 200 hours |
Replace engine oil filter |
Every 200 hours |
Change hydraulic/transmission fluid |
Every 200 hours |
Replace hydraulic/transmission filter |
Every 200 hours |
Check and service air filter elements |
Every 200 hours |
Inspect and adjust alternator belt |
Every 200 hours |
Change engine fuel filter |
Every 400 hours |
Replace primary engine air filter |
Every 600 hours |
Replace secondary engine air filter |
Every 600 hours |
Check and adjust engine idling |
Every 600 hours |
Change front axle oil |
Every 600 hours |
Adjust parking and service brakes |
Every 600 hours |
Check and adjust valve clearance |
Every 1200 hours |
Flush cooling system and add new coolant |
Every 2000 hours |
Engine oil filter part number |
M806419 |
Engine fuel filter part number |
MIU800645, M811031, M811032 |
Primary engine air filter part number |
M131802, RG60690 |
Secondary engine air filter part number |
M131803, RG60866 |
Hydraulic/transmission oil filter part number |
LVU800097 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |