________________________________________________________________________________________
John Deere 2720 Tractor
The
John Deere 2720 is a 4-wheel drive compact utility tractor. This model was
manufactured between 2008 and 2012. The components of John Deere 2720 driveline
system: Yanmar 3TNV88 4-cycle three-cylinder direct injection liquid-cooled
diesel engine and two-range hydrostatic transmission with infinite forward and
reverse gears.
A 100.2 cubic inches (1.6L) engine has a cylinder bore of 3.47" (88 mm),
piston stroke of 3.54" (90 mm), and maximum power of 31.4 hp (23.4 kW).
Max forward speed - 4.7 mph (7.6 km/h) using low range or 13.5 mph (21.7
km/h) using high range, max reverse speed - 4.7 mph (7.6 km/h) using low
range or 13.2 mph (21.2 km/h) using high range. The open center
hydraulic system used a gear pump with a flow rate of 5 gal/min (19
l/min). The hydraulic system pressure is 167 bar (2420 psi).
The John Deere 2720 is equipped with a power steering system, wet disc
brakes, 23x8.50-12 (Turf) or 23x8.50-14 (Industrial) front tires, and
36x14.00-15 (Turf) or 14-17.5 (Industrial) rear tires. The wheelbase is
65.2" (1650 mm). The tractor is compatible with a
John Deere 200CX
front-end loader with lift capacity to full height of 902 lbs (409 kg)
and breakout force of 2239 lbs (1015 kg), and John Deere 46 backhoe with
2-ft flat digging depth of 78" (1980 mm).
| Engine Model |
Yanmar 3TNV88 |
| Engine Type |
4-cycle three-cylinder direct injection liquid-cooled diesel |
| Number of Cylinders |
3 |
| Displacement, cu in (L) |
100.2 (1.642) |
| Engine Bore, in (mm) |
3.47 (88.0) |
| Engine Stroke, in (mm) |
3.54 (90.0) |
| Aspiration |
Naturally aspirated |
| Maximum Engine Power, hp (kW) |
31.4 (23.4) |
| Rated Engine Speed, rpm |
2500 |
| Low Idle Speed, rpm |
1200 |
| High Idle Speed, rpm |
2650 |
| Compression Ratio |
19.1:1 |
| Firing Order |
1-3-2 |
| Fuel System |
Direct injection |
| Lubrication System |
Forced lubrication with trochoid pump |
| Oil Filter Type |
Single element |
| Air Cleaner |
Dual dry element |
| Emission Level |
Tier 4 |
| Fuel Tank Capacity, gal (L) |
7.1 (27.0) |
| Oil Capacity, qts (L) |
3.8 (3.6) |
| Coolant Capacity, qts (L) |
4.2 (4.0) |
| Electrical System Rating, Volts |
12 |
| Charging System |
Alternator |
| Alternator Rating, Amps |
40 |
| PTO Operational Type |
Independent |
| PTO Horsepower, hp (kW) |
23.5 (17.5) |
| Rear PTO Speed, rpm |
540 |
| Mid PTO Speed, rpm |
2100 |
| Transmission Type |
Hydrostatic |
| Number of Forward Gears |
Infinite (2-range) |
| Number of Reverse Gears |
Infinite (2-range) |
| Oil Capacity, qts (L) |
18.6 (17.5) |
| Maximum Forward Speed (Low Range), mph (kph) |
4.7 (7.6) |
| Maximum Forward Speed (High Range), mph (kph) |
13.5 (21.7) |
| Maximum Reverse Speed (Low Range), mph (kph) |
4.7 (7.6) |
| Maximum Reverse Speed (High Range), mph (kph) |
13.2 (21.2) |
| Drive Wheels |
4WD 4x4 |
| Steering Configuration |
Front steer |
| Steering System |
Power Steering |
| Brakes Type |
Wet disc |
| Front Tire Size (Turf) |
23x8.50-12 |
| Rear Tire Size (Turf) |
36x14.00-15 |
| Front Tire Size (Industrial) |
23x8.50-14 |
| Rear Tire Size (Industrial) |
14-17.5 |
| Front Tread, in (mm) |
32.7 (830) |
| Rear Tread, in (mm) |
37.6 (950) |
| Hydraulic System Type |
Open center |
| Implement Pump Type |
Gear |
| Implement Pump Flow, gpm (Lpm) |
5.0 (19.0) |
| Steering Pump Flow, gpm (Lpm) |
5.5 (20.9) |
| Hydraulic Pressure, Bar (psi) |
167 (2420) |
| Hydraulic Fluid Capacity, gal (L) |
3.9 (14.7) |
| Number of Standard Remote Valves |
2 |
| 3-Point Hitch Category |
1 |
| Draft Sensing or Lift Control |
Position control |
| Lift Capacity at 24" (610mm) behind pin, lb (kg) |
566 (1250) |
| Lift Capacity at pin, lb (kg) |
1435 (650) |
| Wheelbase, in (mm) |
65.2 (1650) |
| Overall Length, in (mm) |
108.9 (2760) |
| Height (Hood), in (mm) |
47.2 (1190) |
| Height (ROPS), in (mm) |
89.7 (2270) |
| Overall Width, in (mm) |
52.6 (1330) |
| Ground Clearance, in (mm) |
13 (325) |
| Weight (Operating), lb (kg) |
1975 (895) |
| Weight (Maximum), lb (kg) |
4365 (1980) |
| Loader Model |
John Deere 200CX |
| Maximum Lift Height at Pin, in (mm) |
78.5 (1990) |
| Clearance with Dumped Bucket, in (mm) |
72.2 (1830) |
| Reach at Maximum Height, in (mm) |
29.5 (740) |
| Maximum Dump Angle, deg |
38 |
| Maximum Rollback Angle, deg |
25 |
| Lift Capacity to Max Height at Pin, lbs (kg) |
902 (410) |
| Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
630 (285) |
| Breakout Force at Pivot Pin, lbs (kg) |
2240 (1015) |
| Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
1515 (687) |
| Bucket Width, in (mm) |
53 (1345) |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
