________________________________________________________________________________________
John Deere 2720 Maintenance
The
John Deere 2720 is a 4-wheel drive compact utility tractor. This model was
manufactured between 2008 and 2012. The components of John Deere 2720 driveline
system: Yanmar 3TNV88 4-cycle three-cylinder direct injection liquid-cooled
diesel engine and two-range hydrostatic transmission with infinite forward and
reverse gears.
A 100.2 cubic inches (1.6L) engine has a cylinder bore of 3.47" (88 mm),
piston stroke of 3.54" (90 mm), and maximum power of 31.4 hp (23.4 kW).
Max forward speed - 4.7 mph (7.6 km/h) using low range or 13.5 mph (21.7
km/h) using high range, max reverse speed - 4.7 mph (7.6 km/h) using low
range or 13.2 mph (21.2 km/h) using high range. The open center
hydraulic system used a gear pump with a flow rate of 5 gal/min (19
l/min). The hydraulic system pressure is 167 bar (2420 psi).
The John Deere 2720 is equipped with a power steering system, wet disc
brakes, 23x8.50-12 (Turf) or 23x8.50-14 (Industrial) front tires, and
36x14.00-15 (Turf) or 14-17.5 (Industrial) rear tires. The wheelbase is
65.2" (1650 mm). The tractor is compatible with a
John Deere 200CX
front-end loader with lift capacity to full height of 902 lbs (409 kg)
and breakout force of 2239 lbs (1015 kg), and John Deere 46 backhoe with
2-ft flat digging depth of 78" (1980 mm).
| Engine oil capacity, gal (L) |
0.95 (3.6) |
| Engine coolant capacity, gal (L) |
1.05 (4.0) |
| Hydraulic system capacity, gal (L) |
4.6 (17.5) |
| Front axle oil capacity, gal (L) |
1.05 (3.9) |
| Recommended Oil and Fluid |
| Engine oil type |
Plus-50, Torq-Gard, SAE 10W-30, 5W-30, 10W-40, 15W-40. API Service Category CH or higher |
| Engine coolant type |
Cool-Gard Premix or Cool-Gard PG Premix |
| Hydraulic/transmission fluid type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
| Front axle oil type |
GL-5 Gear Lubricant, SAE 80W-90 |
| Check battery and clean terminals |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Check fluid level in hydraulic system |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Change engine oil |
Every 200 hours |
| Replace engine oil filter |
Every 200 hours |
| Change hydraulic/transmission fluid |
Every 200 hours |
| Replace hydraulic/transmission filter |
Every 200 hours |
| Check and service air filter elements |
Every 200 hours |
| Inspect and adjust alternator belt |
Every 200 hours |
| Change engine fuel filter |
Every 400 hours |
| Replace primary engine air filter |
Every 600 hours |
| Replace secondary engine air filter |
Every 600 hours |
| Check and adjust engine idling |
Every 600 hours |
| Change front axle oil |
Every 600 hours |
| Adjust parking and service brakes |
Every 600 hours |
| Check and adjust valve clearance |
Every 1200 hours |
| Flush cooling system and add new coolant |
Every 2000 hours |
| Engine oil filter part number |
M806419 |
| Engine fuel filter part number |
MIU800645, M811031, M811032 |
| Primary engine air filter part number |
M131802, RG60690 |
| Secondary engine air filter part number |
M131803, RG60866 |
| Hydraulic/transmission oil filter part number |
LVU800097 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
