Home / Farm Tractors / Kubota Tractors / Kubota B7510

Kubota B7510 Tractor

The Kubota B7510 is a B7-10 series compact utility tractor. This model was manufactured from 2004 to 2007. The tractor was designed in 2 versions: B7510DT (gear drive) and B7510HSD (hydrostatic drive).

The Kubota B7510 is powered by 61 cu.in (1 L) Kubota D1005-E 3-cylinder water-cooled diesel engine with a maximum power of 19 hp (14 kW) and 59 Nm (43.5 lb-ft) of peak torque at 2600 rev/min. The Kubota B7510 is fitted with 2 types of transmission. Type 1: Gear shift transmission with 6 forward and 2 reverse gears. Type 2: Two-range hydrostatic transmission with infinite forward and reverse gears.

The maximum forward speed - 12.7 mph (20.4 kph), max. reverse speed - 7.3 mph (11.7 kph). The open center hydraulic system used a dual pump with rated capacity of 4.4 gpm (16.7 lpm). The Kubota B7510 was equipped with a power assist steering system, wet disc brakes, 6.00x12 or 5.00x12 front tires, and 9.50x16 or 8.00x16 rear tires. The wheelbase is 59.1 in (1500 mm).

The tractor is compatible with 54", 60" mid-mount 3-blade side discharge rotary mower decks with cutting height of 1.5-4.0 in (30-100 mm) and hydraulic lift system, and Kubota LA302 loader with lift capacity to max height of 770 lbs (350 kg).

Engine Model Kubota D1005-E-D16
Engine Type Liquid cooled, 3-cylinder diesel
Number of Cylinders Three
Displacement, cu in (L) 61,1 (1,0)
Engine Bore, in (mm) 3,0 (76,0)
Engine Stroke, in (mm) 2,9 (73,6)
Rated Engine Power, hp (kW) 19,0 (14,0)
Maximum Engine Power, hp (kW) 21,0 (15,7)
Rated Engine Speed, rpm 2600
Maximum Torque, Nm (ft-lbs) 59,0 (43,5)
Air Cleaner Dual paper element
Lubrication Forced lubrication
Cooling System Pressurized radiator
Radiator Fan Radial air flow
Fuel Tank Capacity, gal (L) 5,3 (21,0)
Oil Capacity, qts (L) 3,2 (3,0)
Coolant Capacity, qts (L) 4,0 (3,8)
Electrical System Rating, Volts 12
Starting System Electric starting

Power Take-Off
Rear PTO Operational Type Independent
PTO Horsepower, hp (kW) 16,0 (11,9)
Rear PTO Speeds, rpm 540/960
Front PTO Speeds, rpm 2500

Standard Transmission
Transmission Type Gear shift
Gearbox Type 6F/2R
Number of Forward Gears 6
Number of Reverse Gears 2
Clutch Type Dry disc
Oil Capacity, qts (L) 14,2 (13,5)
Maximum Forward Speed, mph (kph) 11,7 (18,8)
Maximum Reverse Speed, mph (kph) 7,3 (11,7)

Optional Transmission
Transmission Type Hydrostatic (HST)
Number of Forward Gears Infinite (2-range)
Number of Reverse Gears Infinite (2-range)
Oil Capacity, qts (L) 16,2 (15,3)
Maximum Forward Speed, mph (kph) 12,7 (20,4)
Maximum Reverse Speed, mph (kph) 7,3 (11,7)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Power Assist
Service Brake Wet disc
Front Tire Size (Std) 6.00x12
Rear Tire Size (Std) 9.50x16
Front Tire Size (Opt) 5.00x12
Rear Tire Size (Opt) 8.00x16

Hydraulic System
Hydraulic System Type Open center
Hydraulic Pump Type Dual pump
Implement Pump Flow, gpm (Lpm) 4,4 (16,7)
Steering Pump Flow, gpm (Lpm) 2,6 (9,8)
Total Pump Flow, gpm (Lpm) 7,0 (26,5)
Number of Standard Remote Valves 1/2
3-Point Hitch Category 1
Draft Sensing or Lift Control Quarter inching valve position control
Standard Lift Capacity 600mm behind pin, lb (kg) 1058 (480)
Standard Lift Capacity at lift pin, lb (kg) 1356 (615)
Optional Lift Capacity 600mm behind pin, lb (kg) 1655 (750)
Optional Lift Capacity at lift pin, lb (kg) 1655 (750)

Dimensions and Weight
Wheelbase, in (mm) 59,1 (1500)
Length (DT/HSD), in (mm) 96,6 (2300)
Length (Narrow), in (mm) 89,6 (2270)
Height with ROPS (DT/HSD), in (mm) 76,4 (1940)
Height with ROPS (Narrow), in (mm) 75,2 (1910)
Overall Width (DT/HSD), in (mm) 42,4 (1070)
Overall Width (Narrow), in (mm) 35,3 (890)
Ground Clearance (DT/HSD), in (mm) 12,0 (300)
Ground Clearance (Narrow), in (mm) 11,8 (290)
Weight (DT), lb (kg) 1325 (600)
Weight (HSD), lb (kg) 1368 (620)

54" Mower Deck
Mower Deck Model RCK54-75B
Mower Deck Type Mid-Mount Side discharge mower
Number of blades 3 blades
Blade length, in (mm) 18,7 (471)
Mounting method Suspended
Cutting width, in (mm) 54 (1360)
Cutting height, in (mm) 1,5-4,0 (38-100)
Adjustment of cutting height Lever and Pin
Weight (approx.), lb (kg) 330 (726)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294