________________________________________________________________________________________
Kubota L2250 Maintenance
The
Kubota L2250 is a 2WD or 4WD compact utility tractor. This model was
manufactured from 1985 to 1990. The Kubota L2250 driveline includes a Kubota
D1302-DI-A 4-cycle vertical 3-cylinder naturally aspirated diesel engine and
mechanical shuttle transmission with 8 forward and 7 reverse gears.
A 79.3 cu.in (1.3 L) engine has a cylinder bore of 3.23" (82 mm), piston
stroke of 3.23" (82 mm), and rated power of 26.5 hp (19.8 kW). Max.
forward speed - 12.9 mph (20.8 km/h), max. reverse speed - 8.2 mph (13.5
km/h). The open center hydraulic system used a gear pump with fluid flow
rate of 6.7 gal/min (25.4 l/min).
The hydraulic fluid capacity is 8.2 gal (31 L). The 2WD models (L2250F)
are equipped with 4.00x15 front tires and 9.5x24 rear tires. The 6.00x14
front tires and 9.5x24 rear tires are used for 4WD tractors (L2250DT).
The wheel base is 64.6" (1640 mm). The Kubota L2250 is compatible with
the following attachments: 60" and 72" mid-mount 3-blade mower decks,
Kubota BF400G front end loader with lift capacity to max height of 882
lbs (400 kg), and Kubota BL4530 backhoe with maximum digging depth of
90" (2280 mm).
| Engine oil capacity, gal (L) |
1.5 (5.7) |
| Engine coolant capacity, gal (L) |
1.2 (4.6) |
| Hydraulic/transmission fluid capacity, gal (L) |
7.5 (28.5) |
| Front axle oil capacity, gal (L) |
1.6 (6.0) |
| Recommended Oil and Fluid |
| Engine oil type |
SAE 20, SAE 30, SAE 10W, 10W-30. API Service category CC, CD |
| Engine coolant type |
Kubota Antifreeze/Coolant |
| Hydraulic/transmission fluid type |
Kubota UDT Fluid |
| Front axle oil type |
Kubota UDT, SAE 80, SAE 80W-90 Gear Oil |
| Check hydraulic/transmission fluid level |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 100 hours |
| Clean engine air filter element |
Every 100 hours |
| Clean engine fuel filter element |
Every 100 hours |
| Change engine oil |
Every 200 hours |
| Replace hydraulic oil filter |
Every 200 hours |
| Check battery and clean terminals |
Every 200 hours |
| Inspect and adjust fan belt |
Every 200 hours |
| Adjust parking and service brakes |
Every 200 hours |
| Check power steering oil line |
Every 200 hours |
| Check and adjust engine idling |
Every 200 hours |
| Replace engine oil filter |
Every 400 hours |
| Replace engine fuel filter |
Every 400 hours |
| Change hydraulic/transmission fluid |
Every 400 hours |
| Change front axle oil |
Every 400 hours |
| Check and adjust valve clearance |
Every 800 hours |
| Check fuel injection nozzles |
Every 800 hours |
| Replace engine air filter element |
Every 1000 hours |
| Flush cooling system and add new coolant |
Every 1000 hours |
| Engine oil filter part number |
HH164-32430 |
| Engine fuel filter part number |
15521-43160 (Element) |
| Engine fuel filter gasket part number |
04811-50650 and 04816-00160 |
| Engine air filter part number |
70000-11081, 15287-11490 |
| Hydraulic oil filter part number |
31391-38830, H3840-37712, 30400-37710 |
| Drive belt part number |
17331-97010 |
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
