________________________________________________________________________________________

Home / Farm Tractors / Kubota Tractors / Kubota L2950

Kubota L2950 Tractor

The Kubota L2950 is a 2-wheel drive or 4-wheel drive compact utility tractor from L50-series. This model was manufactured between 1990 and 1993. The Kubota L2950 tractor is powered by 89.2 cubic inches (1.50) Kubota D1462-DI 4 cycle vertical 4-cylinder direct injection water-cooled diesel engine with a rated power of 29 hp (21.7 kW) and 95 Nm (70.2 lb-ft) of peak torque at 1600 rev/min.

The Kubota L2950 is fitted with 2 transmission options: 8x8 mechanical shuttle transmission and glide shift transmission (GST) with 8 forward and 8 reverse gears. Max. travel speed (forward and reverse): 14.8 mph (23.7 km/h) / 12.5 mph (20 km/h). The open center hydraulic system used a gear pump with a flow of 6.8 gpm (25.7 lpm). The hydraulic system pressure is 172 bar (2490 psi).

The 2WD models are equipped with 5.00x15 front tires and 12.4x24 rear tires. The 7.00x16 or 25x8.50-14 front tires and 12.4x24 or 13.6x16 rear tires are used for 4WD tractors. The wheelbase is 64.6" (1640 mm). The Kubota L2950 is compatible with a LB400 front end loader with lift capacity to full height of 882 lbs (400 kg).

Engine
Engine Model Kubota D1462-DI-AE
Engine Type Vertical, 4 cycle, direct injection diesel
Number of Cylinders 3
Displacement, cu in (L) 89.2 (1.50)
Engine Bore, in (mm) 3.38 (86.0)
Engine Stroke, in (mm) 3.21 (81.0)
Rated Engine Power, hp (kW) 29.0 (21.7)
Maximum Engine Power, hp (kW) 31.7 (23.6)
Rated Engine Speed, rpm 2600
Maximum Torque, Nm (ft-lbs) 95 (70.2)
Torque Speed, rpm 1600
Firing Order 1-2-3
Fuel System Direct injection
Fuel Tank Capacity, gal (L) 7.7 (29.1)
Oil Capacity, qts (L) 6.0 (5.7)
Coolant Capacity, qts (L) 4.9 (4.6)
Electrical System Rating, Volts 12
Starting System Electric starter
Battery Cold-Cranking, Amps 490

Power Take-Off
PTO Operational Type Transmission / Live (Opt)
PTO Horsepower, hp (kW) 26.0 (19.5)
Rear PTO Speeds, rpm 540/1000
Mid PTO Optional
Mid PTO Speeds, rpm 1080/2000

Standard Transmission
Transmission Type Mechanical shuttle
Gearbox Type 8F/8R
Number of Forward Speeds 8 (4 gears in 2-Ranges)
Number of Reverse Speeds 8 (4 gears in 2-Ranges)
Clutch Type Dual-stage type
Maximum Forward Speed, mph (kph) 13.8 (22.3)
Maximum Reverse Speed, mph (kph) 12.0 (19.2)

Optional Transmission
Transmission Type Glide Shift (GST)
Gearbox Type 8F/8R
Number of Forward Speeds 8
Number of Reverse Speeds 8
Clutch Type Dry disc
Oil Capacity, qt (L) 28.5 (27.0)
Maximum Forward Speed, mph (kph) 14.8 (23.7)
Maximum Reverse Speed, mph (kph) 12.5 (20.0)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Power Steering
Service Brake Wet disc
Front Tire Size (2WD) 5.00-15
Front Tire Size (4WD) 7.00-16
Rear Tire Size 12.4-24
Front Tire Size (Turf) 25x8.50-14
Rear Tire Size (Turf) 13.6-16
Front Tread (2WD), in (mm) 37.8-49.6 (960-1250)
Front Tread (4WD), in (mm) 44.1 (1120)
Rear Tread, in (mm) 40.6-55.1 (1030-1390)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Type Gear
Implement Pump Flow, gpm (Lpm) 6.8 (25.7)
Hydraulic Pressure, Bar (psi) 172 (2490)
Hydraulic Capacity, gal (L) 7.5 (28.4)
3-Point Hitch Category 1
Draft Sensing or Lift Control Position control with optional draft control
Standard Lift Capacity 24-in (600mm) behind pin, lb (kg) 1985 (900)
Standard Lift Capacity at lift pin, lb (kg) 2650 (1200)

Dimensions and Weight
Wheelbase, in (mm) 64.6 (1640)
Length, in (mm) 110 (2790)
Height (Steering Wheel), in (mm) 58.1 (1470)
Height (ROPS), in (mm) 83.7 (2120)
Overall Width, in (mm) 52.7 (1330)
Ground Clearance, in (mm) 13.6 (340)
Weight (2WD), lb (kg) 2445 (1110)
Weight (4WD), lb (kg) 2670 (1210)
Weight (with GST), lb (kg) 2720 (1235)

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294