Home / Farm Tractors / Kubota Tractors / Kubota L4200

Kubota L4200 Maintenance

The Kubota L4200 is a Grand L series compact utility tractor. This model was manufactured from 1994 to 1999. The Kubota L4200 tractor is powered by Kubota V2203-A 4-cylinder indirect injection diesel engine with a rated power of 45.3 Hp (35.3 kW) and 139.1 Nm (102.9 lb-ft) of max torque at 1500 rpm.

The Kubota L4200 was fitted with 2 types of transmission: 8x8 FST Sync Shuttle fully synchronized transmission or Glide Shift transmission with 8 forward and 8 reverse gears (16x16 with creeper). The maximum travel speed (forward/reverse): 14.7 mph (23.7 km/h) and 13.5 mph (21.7 km/h).

The open center hydraulic system used a gear pump with a flow rate of 7.8 gal/min (29.5 l/min). The main relief pressure is 173 bar (2520 psi). The 2-wheel drive models are equipped with 6.00x16 front tires and 14.9x24 rear tires. The 8.3x16 front tires and 14.9x24 rear tires are used for tractors with 4-wheel drive. The wheelbase is 71.3" (1810 mm) for models with 2WD and 71.1" (1805 mm) for models with 4WD.

The Kubota L4200 is compatible with the following attachments: 60" and 72" front-mount 3-blade mower decks with hydraulic lift system, Kubota LA681 loader with lift capacity to full height of 1499 lbs (679 kg), and Kubota BL4690 backhoe with max digging depth of 90.2" (2290 mm).

Refill Capacities
Engine oil capacity, gal (L) 1.6 (6.0)
Engine coolant capacity, gal (L) 2.0 (7.5)
Hydraulic/transmission fluid capacity, gal (L) 10.3 (39.0)
Front axle oil capacity, gal (L) 1.45 (5.5)

Recommended Oil and Fluid
Engine oil type SAE 20, SAE 30, SAE 10W-30, 10W-40. API Service category CC, CD
Engine coolant type Kubota Antifreeze/Coolant
Hydraulic/transmission fluid type Kubota Super UDT Fluid
Front axle oil type Kubota Super UDT, SAE 80, SAE 80W-90 Gear Oil

Service Intervals
Check hydraulic/transmission fluid level Every 50 hours
Check front axle oil level Every 50 hours
Lubricate axle hub bearings Every 50 hours
Check battery and clean terminals Every 50 hours
Change engine oil Every 100 hours
Clean engine air filter element Every 100 hours
Clean engine fuel filter element Every 100 hours
Inspect and adjust fan belt Every 100 hours
Adjust parking and service brakes Every 100 hours
Replace engine oil filter Every 200 hours
Replace hydraulic/transmission oil filter Every 200 hours
Clean cab air filter Every 200 hours
Check power steering oil line Every 200 hours
Check and adjust engine idling Every 200 hours
Replace engine fuel filter Every 400 hours
Change hydraulic/transmission fluid Every 400 hours
Change front axle oil Every 400 hours
Check and adjust valve clearance Every 800 hours
Replace engine air filter element Every 1000 hours
Flush cooling system and add new coolant Every 1500 hours

Replacement Parts
Engine oil filter part number HH164-32430
Engine fuel filter part number 15521-43160 (Element)
Engine fuel filter gasket part number 04811-50650 and 04816-00160
Engine air filter part number T0070-16324, TA040-93230, TA040-93220 (Element)
Cab air filter part number 34070-72070
Hydraulic oil filter part number HHTA0-37710, T0070-37710
Drive belt part number 15469-97010



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294