________________________________________________________________________________________

Home / Farm Tractors / Kubota Tractors / Kubota M108X

Kubota M108X Tractor

The Kubota M108X is a 4WD row-crop tractor. This model was manufactured between 2007 and 2009. The Kubota M108X tractor is powered by Kubota V3800 4-cycle 4-cylinder direct injection turbocharged diesel engine. A 230 cubic inches (3.8L) engine has a cylinder bore of 3.94" (100 mm), piston stroke of 4.72" (120 mm), and rated power of 108 hp (80.5 kW).

The Kubota M108X is fitted with 2 transmission options: Intelli-Shift partial powershift transmission with 16 forward and 16 reverse gears, or Intelli-Shift Creeper transmission with 24 forward and 24 reverse gears. Max. travel speed - 21.4 mph (34.5 km/h), max. creeper speed - 0.7 mph (1.1 km/h). The open center hydraulic system includes a gear pump with a flow of 18.1 gal/min (68.5 l/min). The main relief pressure is 196 (2845 psi).

The Kubota M108X was equipped with a hydrostatic power steering, hydraulic wet disc brakes, 13.6R24 front tires, and 18.4R34 rear tires. The wheelbase is 95.9" (2430 mm). The tractor is compatible with a Kubota LA1301S loader with 84" (2130 mm) bucket and lift capacity to full height of 3085 lbs (1400 kg).

Engine
Engine Model Kubota V3800
Engine Type 4-cycle, direct injection turbocharged diesel
Number of Cylinders 4
Displacement, cu in (L) 230.0 (3.8)
Engine Bore, in (mm) 3.94 (100.0)
Engine Stroke, in (mm) 4.72 (120.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 108.0 (80.5)
Rated Engine Speed, rpm 2600
Idle Speed, rpm 775-825
Compression Ratio 19:1
Firing Order 1-3-4-2
Fuel System Type Direct injection
Fuel Injection Pump Bosch Type Mini
Fuel Tank Capacity, gal (L) 50.2 (190.0)
Oil Capacity, qts (L) 11.3 (10.7)
Electrical System Rating, Volts 12

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 111.8 (83.4)
PTO Speed, rpm 540/1000
PTO / Engine Speed, rpm 540/2035
PTO / Engine Speed, rpm 1000/2210

Standard Transmission
Transmission Type Intelli-Shift
Gearbox Type 16F/16R, partial powershift
Number of Forward Gears 16
Number of Reverse Gears 16
Clutch Type Electro-hydraulic wet discs
Oil Capacity, qts (L) 66.4 (62.8)
Maximum Forward Speed, mph (kph) 21.4 (34.5)
Maximum Reverse Speed, mph (kph) 21.4 (34.5)

Optional Transmission
Transmission Type Intell-Shift Creeper
Gearbox Type 24F/24R
Number of Forward Gears 24
Number of Reverse Gears 24
Maximum Forward Speed, mph (kph) 0.7 (1.1)
Maximum Reverse Speed, mph (kph) 0.7 (1.1)


Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steering
Steering System Hydrostatic power
Brakes Type Hydraulic wet disc
Front Tire Size 13.6R24
Rear Tire Size 18.4R34
Front Tread, in (mm) 60.2-65.4 (1520-1660)
Front Tread, in (mm) 60.2-80.1 (1520-2030)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 18.1 (68.5)
Steering Pump Flow, gpm (Lpm) 13.2 (50.1)
Hydraulic Pressure, Bar (psi) 196 (2845)
Hydraulic Fluid Capacity, gal (L) 16.6 (62.8)
3-Point Hitch Category 2
Draft Sensing or Lift Control Position and electronic draft control
Standard Lift Capacity at lift pin, lb (kg) 5810 (2635)
Optional Lift Capacity at lift pin, lb (kg) 9450 (4285)
Upper Link Pin Diameter, in (mm) 1.00 (25.4)
Upper Link Hole Diameter, in (mm) 1.01 (25.7)
Lower Link Pin Diameter, in (mm) 1.10 (27.9)
Lower Link Hole Diameter, in (mm) 1.13 (28.7)

Dimensions and Weight
Wheelbase, in (mm) 95.9 (2430)
Length, in (mm) 163.4 (4150)
Height, in (mm) 105.9 (2680)
Overall Width, in (mm) 83.7 (2120)
Ground Clearance, in (mm) 23.2 (580)
Turning Radius, in (mm) 150 (3800)
Weight, lb (kg) 9430 (4275)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294