Home / Farm Tractors / Kubota Tractors / Kubota M110X

Kubota M110X Tractor

The Kubota M110X is a four-wheel drive row crop tractor from M-series. This model was manufactured between 2009 and 2014. The Kubota M110X tractor is powered by 230 cubic inches (3.8 L) Kubota V3800-TI-CRS 4-cycle 4-cylinder direct injection turbocharged diesel engine with a rated power of 110 hp (82 kW).

The Kubota M110X is fitted with 2 transmission options: Intelli-Shift partial powershift transmission with 16 forward and 16 reverse gears, and Intell-Shift Creeper transmission with 24 forward and 24 reverse gears. Max forward/reverse speed (travel/creeper): 21.4 mph (34.5 km/h) and 0.7 mph (1.1 km/h).

The open center hydraulic system includes a gear pump with fluid flow rate of 18.1 gpm (68.5 lpm). The hydraulic pressure is 196 bar (2845 psi). The Kubota M110X is equipped with a hydrostatic power steering, hydraulic wet disc brakes, 13.6R24 or 12.4x24 front tires, and 18.4R34 or 16.9x34 rear tires. The wheelbase is 95.9" (2430 mm). The tractor is compatible with a Kubota LA1953 loader with lift capacity to maximum height of 4300 lbs (1950 kg) and breakout force of 5802 lbs (2631 kg).

Engine Model Kubota V3800-TI-CRS
Engine Type 4-cycle, direct injection turbocharged diesel
Number of Cylinders 4
Displacement, cu in (L) 230.0 (3.8)
Engine Bore, in (mm) 3.94 (100.0)
Engine Stroke, in (mm) 4.72 (120.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 110.0 (82.0)
Rated Engine Speed, rpm 2600
Idle Speed, rpm 775-825
Compression Ratio 19:1
Firing Order 1-3-4-2
Fuel System Type Direct injection
Fuel Injection Pump Bosch Type Mini
Air Cleaner Dual dry element
Fuel Tank Capacity, gal (L) 50.2 (190.0)
Oil Capacity, qts (L) 11.1 (10.5)
Electrical System Rating, Volts 12

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 95.0 (70.8)
PTO Speed, rpm 540/1000
PTO / Engine Speed, rpm 540/2035
PTO / Engine Speed, rpm 1000/2210

Standard Transmission
Transmission Type Intelli-Shift
Gearbox Type 16F/16R, partial powershift
Number of Forward Gears 16
Number of Reverse Gears 16
Clutch Type Electro-hydraulic wet discs
Oil Capacity, qts (L) 63.2 (59.8)
Maximum Forward Speed, mph (kph) 21.4 (34.5)
Maximum Reverse Speed, mph (kph) 21.4 (34.5)

Optional Transmission
Transmission Type Intell-Shift Creeper
Gearbox Type 24F/24R
Number of Forward Gears 24
Number of Reverse Gears 24
Maximum Forward Speed, mph (kph) 0.7 (1.1)
Maximum Reverse Speed, mph (kph) 0.7 (1.1)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steering
Steering System Hydrostatic power
Brakes Type Hydraulic wet disc
Front Tire Size (Std) 13.6R24
Rear Tire Size (Std) 18.4R34
Front Tire Size (Opt) 12.4-24
Rear Tire Size (Opt) 16.9-34
Front Tread, in (mm) 62.2-66.1 (1570-1670)
Front Tread, in (mm) 62.2-80.1 (1570-2030)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 18.1 (68.5)
Steering Pump Flow, gpm (Lpm) 17.2 (65.1)
Hydraulic Pressure, Bar (psi) 196 (2845)
Hydraulic Fluid Capacity, gal (L) 15.8 (59.8)
3-Point Hitch Category 2
Draft Sensing or Lift Control Position and electronic draft control
Standard Lift Capacity at lift pin, lb (kg) 5810 (2635)
Optional Lift Capacity at lift pin, lb (kg) 9450 (4285)
Upper Link Pin Diameter, in (mm) 1.00 (25.4)
Upper Link Hole Diameter, in (mm) 1.01 (25.7)
Lower Link Pin Diameter, in (mm) 1.10 (27.9)
Lower Link Hole Diameter, in (mm) 1.13 (28.7)

Dimensions and Weight
Wheelbase, in (mm) 95.9 (2430)
Length, in (mm) 167 (4240)
Height, in (mm) 105.9 (2680)
Overall Width, in (mm) 83.7 (2120)
Ground Clearance, in (mm) 23.2 (580)
Turning Radius, in (mm) 158 (4000)
Weight, lb (kg) 9050 (4105)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294