________________________________________________________________________________________
Kubota M120 Maintenance
The
Kubota M120 utility tractor was manufactured between 1998 and 2004. This model
was designed in 2 versions: M120 (2WD) and M120DT (4WD). The Kubota M120 tractor
is powered by Kubota F5802 4-cycle 5-cylinder direct injection turbocharged
diesel engine. A 356 cubic inches (5.8L) engine has a cylinder bore of 4.29"
(109 mm), piston stroke of 4.92" (125 mm), and rated power of 120 hp (89.5 kW).
The Kubota M120 is fitted with two transmission options: Powershift
transmission with 16 forward and 16 reverse gears, and Powershift
Creeper transmission with 24 forward and 24 reverse gears. Max
forward/reverse speed (travel and creeper) - 20.3 mph (32.7 km/h) and
0.7 mph (1.2 km/h). The open center hydraulic system used a gear pump
with a rated fluid flow of 20.6 gallons per minute (78 liters per
minute). The rear lift capacity is 5200 lbs (2360 kg) at lift pin.
The 2WD models are equipped with 11.00-16 front tyres and 18.4-38 rear
tyres. The 14.9-24 front tyres and 18.4-38 rear tyres fit 4WD tractors.
The wheelbase is 103.7" (2630 mm) for models with 2-wheel drive and
105.9" (2680 mm) for models with 4-wheel drive. The tractor is
compatible with a Kubota LA1301 loader with lift capacity to max height
of 2865 lbs (1300 kg), or Kubota LA1601 loader with lift capacity to max
height of 3527 lbs (1600 kg).
Engine oil capacity, gal (L) |
5.5 (20.8) |
Engine coolant capacity, gal (L) |
3.8 (14.5) |
Hydraulic/transmission fluid capacity, gal (L) |
15.3 (58.0) |
Front axle oil capacity, gal (L) |
4.35 (16.5) |
Recommended Oil and Fluid |
Engine oil type |
SAE 20, SAE 30, 10W-30, 15W-40. API Service category CD, CE, CF |
Engine coolant type |
Kubota Antifreeze/Coolant |
Hydraulic/transmission fluid type |
Kubota Super UDT Fluid |
Front axle oil type |
Kubota Super UDT, SAE 80, SAE 80W-90 Gear Oil |
Check hydraulic/transmission fluid level |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Clean engine air filter elements |
Every 100 hours |
Check battery and clean terminals |
Every 100 hours |
Inspect and adjust fan belt |
Every 100 hours |
Adjust parking and service brakes |
Every 100 hours |
Clean cab air filters |
Every 200 hours |
Adjust toe-in |
Every 200 hours |
Check and adjust engine idling |
Every 200 hours |
Check power steering oil line |
Every 200 hours |
Replace hydraulic/transmission oil filter |
Every 300 hours |
Change engine oil |
Every 300 hours |
Replace engine oil filter |
Every 300 hours |
Replace engine fuel filter |
Every 400 hours |
Change hydraulic/transmission fluid |
Every 600 hours |
Change front axle oil |
Every 600 hours |
Check and adjust valve clearance |
Every 800 hours |
Replace primary engine air filter element |
Every 1000 hours |
Replace secondary engine air filter element |
Every 1000 hours |
Clean fuel injection nozzles |
Every 1500 hours |
Flush cooling system and add new coolant |
Every 2000 hours |
Engine oil filter part number |
HH160-32430 |
Engine fuel filter part number |
HH166-43560 |
Primary engine air filter part number |
3F240-11220 |
Secondary engine air filter part number |
3F240-11230 (Element) |
Cab air filter part number |
33760-50320, 52241-21650 |
Hydraulic/transmission oil filter part number |
HH330-82630, HH520-15320 |
Drive belt part number |
3M760-15780, 15451-97010 |
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |