Home / Farm Tractors / Kubota Tractors / Kubota M120

Kubota M120 Tractor

The Kubota M120 utility tractor was manufactured between 1998 and 2004. This model was designed in 2 versions: M120 (2WD) and M120DT (4WD). The Kubota M120 tractor is powered by Kubota F5802 4-cycle 5-cylinder direct injection turbocharged diesel engine. A 356 cubic inches (5.8L) engine has a cylinder bore of 4.29" (109 mm), piston stroke of 4.92" (125 mm), and rated power of 120 hp (89.5 kW).

The Kubota M120 is fitted with two transmission options: Powershift transmission with 16 forward and 16 reverse gears, and Powershift Creeper transmission with 24 forward and 24 reverse gears. Max forward/reverse speed (travel and creeper) - 20.3 mph (32.7 km/h) and 0.7 mph (1.2 km/h). The open center hydraulic system used a gear pump with a rated fluid flow of 20.6 gallons per minute (78 liters per minute). The rear lift capacity is 5200 lbs (2360 kg) at lift pin.

The 2WD models are equipped with 11.00-16 front tyres and 18.4-38 rear tyres. The 14.9-24 front tyres and 18.4-38 rear tyres fit 4WD tractors. The wheelbase is 103.7" (2630 mm) for models with 2-wheel drive and 105.9" (2680 mm) for models with 4-wheel drive. The tractor is compatible with a Kubota LA1301 loader with lift capacity to max height of 2865 lbs (1300 kg), or Kubota LA1601 loader with lift capacity to max height of 3527 lbs (1600 kg).

Engine Model Kubota F5802
Engine Type 4-cycle, direct injection turbocharged diesel
Number of Cylinders 5
Displacement, cu in (L) 356 (5.8)
Engine Bore, in (mm) 4.29 (109.0)
Engine Stroke, in (mm) 4.92 (125.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 120.0 (89.5)
Rated Engine Speed, rpm 2400
Fuel System Type Direct injection
Air Cleaner Dual paper elements
Fuel Tank Capacity, gal (L) 52.8 (200.0)
Oil Capacity, qts (L) 22.0 (20.8)
Electrical System Rating, Volts 12

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 98.0 (73.1)
PTO Clutch Hydraulic wet disc
PTO Speed, rpm 540/1000

Standard Transmission
Transmission Type PowerShift
Gearbox Type 16F/16R
Number of Forward Gears 16
Number of Reverse Gears 16
Clutch Type Electro-hydraulic wet disc
Maximum Forward Speed, mph (kph) 20.3 (32.7)
Maximum Reverse Speed, mph (kph) 20.3 (32.7)

Optional Transmission
Transmission Type Creeper
Gearbox Type 24F/24R
Number of Forward Gears 24
Number of Reverse Gears 24
Maximum Forward Speed, mph (kph) 0.7 (1.2)
Maximum Reverse Speed, mph (kph) 0.7 (1.2)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front steering
Steering System Power steering
Brakes Type Differential hydraulic wet discs
Front Tire Size (2WD) 11.00-16
Front Tire Size (4WD) 14.9-24
Rear Tire Size 18.4-38

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 20.6 (78.0)
Hydraulic Capacity, gal (L) 15.3 (57.5)
3-Point Hitch Category 2
Draft Sensing or Lift Control Position and electronic draft control
Standard Lift Capacity at lift pin, lb (kg) 5200 (2360)
Optional Lift Capacity at lift pin, lb (kg) 7940 (3600)
Upper Link Pin Diameter, in (mm) 1.00 (25.4)
Upper Link Hole Diameter, in (mm) 1.01 (25.7)
Lower Link Pin Diameter, in (mm) 1.10 (27.9)
Lower Link Hole Diameter, in (mm) 1.13 (28.7)

Dimensions and Weight
Wheelbase (2WD), in (mm) 103.7 (2630)
Wheelbase (4WD), in (mm) 105.9 (2680)
Length, in (mm) 172.8 (4380)
Height, in (mm) 107.3 (2720)
Overall Width, in (mm) 82.7 (2100)
Ground Clearance, in (mm) 20.5 (520)
Weight (2WD), lb (kg) 9040 (4100)
Weight (4WD), lb (kg) 9700 (4400)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294