________________________________________________________________________________________
Kubota M7060 Maintenance
The
Kubota M7060 utility tractor was manufactured from 2013 to 2020. This model has
the following versions: M7060HF (ROPS, 2WD, 8-speed), M7060HFC (Cab, 2WD,
8-speed), M7060HD (ROPS, 4WD, 8-speed), M7060HDC (Cab, 4WD, 8-speed), M7060HD12
(ROPS, 4WD, 12-speed), M7060HDC12 (Cab, 4WD, 12-speed).
The Kubota M7060 tractor is powered by Kubota V3307-CR-TE4 4-stroke
4-cylinder direct injection turbocharged diesel engine with a maximum
power of 71 hp (52.9 kW).
The Kubota M7060 is fitted with two transmission options: 8x8 power
shuttle transmission, or 12x12 power shuttle transmission. The maximum
travel speed (forward/reverse): 22.5 mph (36 km/h). The closed center
hydraulic system used a piston pump with rated fluid flow of 11 gpm
(41.5 lpm). The main relief pressure is 2830 psi (195 bar).
The 2WD models are equipped with 7.50-16 front tires and 16.9-30 rear
tires. The 9.50-24 front tires and 16.9-30 rear tires are used for 4WD
tractors. The wheel base is 84.4" (2140 mm) for models with 2-wheel
drive and 83.1" (2110 mm) for models with 4-wheel drive. The Kubota
M7060 is compatible with Kubota LA1154 front end loader with lift
capacity to maximum height of 2928 lbs (1328 kg).
| Engine oil capacity, gal (L) |
3.2 (12.0) |
| Engine coolant capacity, gal (L) |
2.1 (8.0) |
| Hydraulic/transmission fluid capacity, gal (L) |
14.8 (56.0) |
| Front axle oil capacity, gal (L) |
2.4 (9.0) |
| Recommended Oil and Fluid |
| Engine oil type |
SAE 20, SAE 30, 10W-30, 15W-40. API Service category CI-4, CJ-4 |
| Engine coolant type |
Kubota Antifreeze/Coolant |
| Hydraulic/transmission fluid type |
Kubota Super UDT-2 Fluid |
| Front axle oil type |
Kubota Super UDT-2, SAE 80, SAE 80W-90 Gear Oil |
| Check hydraulic/transmission fluid level |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Clean engine air filter elements |
Every 100 hours |
| Check battery and clean terminals |
Every 100 hours |
| Inspect and adjust fan/alternator belt |
Every 100 hours |
| Adjust toe-in |
Every 200 hours |
| Check and adjust engine idling |
Every 200 hours |
| Clean water separator |
Every 400 hours |
| Change engine oil |
Every 500 hours |
| Replace engine oil filter |
Every 500 hours |
| Replace hydraulic/transmission oil filter |
Every 500 hours |
| Replace engine fuel filter |
Every 500 hours |
| Adjust parking and service brakes |
Every 500 hours |
| Check power steering oil line |
Every 500 hours |
| Change hydraulic/transmission fluid |
Every 1000 hours |
| Change front axle oil |
Every 1000 hours |
| Check and adjust valve clearance |
Every 1000 hours |
| Replace primary engine air filter element |
Every 1000 hours |
| Replace secondary engine air filter element |
Every 1000 hours |
| Clean fuel injection nozzles |
Every 1500 hours |
| Clean EGR cooler |
Every 1500 hours |
| Flush cooling system and add new coolant |
Every 2000 hours |
| Engine oil filter part number |
HH1C0-32430 |
| Engine fuel filter part number |
1J800-43172 (Element) |
| Primary engine air filter part number |
59800-26110 |
| Secondary engine air filter part number |
3A111-19130 (Element) |
| Hydraulic oil filter part number |
HHTA0-37710 or TC422-82620 |
| Drive belt part number |
1G772-97020 |
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
