Home / Farm Tractors / Kubota Tractors / Kubota M7950

Kubota M7950 Tractor

The Kubota M7950 utility tractor was manufactured between 1983 and 1994. This model has several variants: M7950F (2WD), M7950DT (4WD), M7950FW (Wide-tread), M7950DTM (Mudder), and M7950HC (High-crop). The Kubota M7950 tractor is equipped with a 262 cu.in (4.3 L) Kubota V4300 vertical 6-cylinder naturally aspirated liquid-cooled diesel engine. The engine has a cylinder bore of 4.29" (109 mm), piston stroke of 4.53" (115 mm), and rated power of 81 hp (60.4 kW). The fully synchronized transmission consists of a single dry clutch and gearbox with 12 forward and 4 reverse gears.

The maximum forward speed - 17.9 mph (28.8 kph), maximum reverse speed - 7.5 mph (12.1 kph). The open center hydraulic system has a gear pump with a rated capacity of 11 gal/min (41.6 l/min). The hydraulic system pressure is 181 bar (2630 psi). The two-wheel drive models are equipped with 7.50x18 front tyres and 18.4x30 rear tyres. The 11.2x24 front tyres and 18.4x30 rear tyres fit four-wheel drive tractors. The Kubota M7950 tractor can be equipped with the following attachments: Kubota M1850A front-end loader with a lift capacity to full height of 2630 lbs (1192 kg) and breakout force of 4640 (2104 kg).

Engine Model Kubota V4300
Engine Type Vertical 4-stroke four-cylinder diesel
Number of Cylinders 4
Displacement, cu in (L) 261.9 (4.30)
Engine Bore, in (mm) 4.29 (109.0)
Engine Stroke, in (mm) 4.53 (115.0)
Aspiration Naturally aspirated
Rated Engine Power, hp (kW) 81.0 (60.4)
Rated Engine Speed, rpm 2400
Compression 17.0:1
Firing Order 1-3-4-2
Governor Mechanical
Air cleaner Single paper element
Fuel Tank Capacity, gal (L) 26.5 (100.0)
Oil Capacity, qts (L) 10.8 (10.2)
Coolant Capacity, qts (L) 14.4 (13.6)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 65

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 75.4 (56.3)
PTO Clutch Dry disc
PTO Speed, rpm 540/1000
PTO / Engine Speed, rpm 540/2035

Transmission Type Fully synchronized
Gearbox Type 12F/4R
Number of Forward Gears 12
Number of Reverse Gears 4
Clutch Type Dry disc
Oil Capacity, qts (L) 52.8 (50.0)
Maximum Forward Speed, mph (kph) 17.9 (28.8)
Maximum Reverse Speed, mph (kph) 7.5 (12.1)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Differential hydraulic wet disc
Front Tire Size (2WD) 7.50x18
Rear Tire Size (2WD) 18.4x30
Front Tire Size (4WD) 11.2x24
Rear Tire Size (4WD) 18.4x30
Front Track Width (2WD), in (mm) 55.9-79.5 (1410-2010)
Front Track Width (4WD), in (mm) 60.6-68.5 (1530-1730)
Rear Track Width, in (mm) 59.8-79.5 (1510-2010)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 11.0 (41.6)
Hydraulic Fluid Capacity, gal (L) 13.2 (50.0)
Hydraulic Pressure, Bar (psi) 181 (2630)
Number of Standard Remote Valves 1/2
3-Point Hitch Category 2
Standard Lift Capacity 24" (600mm) behind pin, lb (kg) 4475 (2030)
Standard Lift Capacity at lift pin, lb (kg) 4850 (2200)

Dimensions and Weight
Wheelbase (2WD), in (mm) 87.6 (2220)
Wheelbase (4WD), in (mm) 89 (2260)
Length, in (mm) 152.8 (3880)
Height (Steering Wheel), in (mm) 68.9 (1750)
Height (Exhaust), in (mm) 96.1 (2440)
Overall Width, in (mm) 78.2 (1980)
Ground Clearance (2WD), in (mm) 21.3 (540)
Ground Clearance (4WD), in (mm) 15.1 (380)
Weight (2WD), lb (kg) 5960 (2700)
Weight (4WD), lb (kg) 6815 (3090)
Weight (Operating), lb (kg) 7100 (3220)
Weight (Ballasted), lb (kg) 10305 (4675)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294