________________________________________________________________________________________

Home / Farm Tractors / Kubota Tractors / Kubota M7950

Kubota M7950 Maintenance

The Kubota M7950 utility tractor was manufactured between 1983 and 1994. This model has several variants: M7950F (2WD), M7950DT (4WD), M7950FW (Wide-tread), M7950DTM (Mudder), and M7950HC (High-crop). The Kubota M7950 tractor is equipped with a 262 cu.in (4.3 L) Kubota V4300 vertical 6-cylinder naturally aspirated liquid-cooled diesel engine. The engine has a cylinder bore of 4.29" (109 mm), piston stroke of 4.53" (115 mm), and rated power of 81 hp (60.4 kW). The fully synchronized transmission consists of a single dry clutch and gearbox with 12 forward and 4 reverse gears.

The maximum forward speed - 17.9 mph (28.8 kph), maximum reverse speed - 7.5 mph (12.1 kph). The open center hydraulic system has a gear pump with a rated capacity of 11 gal/min (41.6 l/min). The hydraulic system pressure is 181 bar (2630 psi). The two-wheel drive models are equipped with 7.50x18 front tyres and 18.4x30 rear tyres. The 11.2x24 front tyres and 18.4x30 rear tyres fit four-wheel drive tractors. The Kubota M7950 tractor can be equipped with the following attachments: Kubota M1850A front-end loader with a lift capacity to full height of 2630 lbs (1192 kg) and breakout force of 4640 (2104 kg).

REFILL CAPACITIES

Engine oil capacity, gal (L) ............... 3.5 (13.3)
Engine coolant capacity, gal (L) ............... 3.6 (13.7)
Hydraulic/transmission fluid capacity, gal (L) ............... 13.3 (50.5)
Front axle oil capacity, qts (L) ............... 8.0 (7.6)

RECOMMENDED OIL AND FLUID

Engine oil type ............... SAE20, SAE30, or SAE 10W-30
Engine coolant type ............... Kubota Antifreeze and clean water mix
Hydraulic/transmission fluid type ............... Kubota UDT or Kubota Super UDT
Front axle oil type ............... Kubota Super UDT or SAE80, SAE90 gear oil

SERVICE INTERVALS

Check battery condition ............... every 100 hours
Change engine oil ............... every 200 hours
Clean primary air filter element ............... every 200 hours
Clean secondary air filter element ............... every 200 hours
Check fan belt ............... every 200 hours
Replace engine oil filter ............... every 400 hours
Replace fuel filter ............... every 400 hours
Clean hydraulic oil filter ............... every 400 hours
Change transmission fluid ............... every 600 hours
Change front axle case oil ............... every 600 hours
Adjust engine valve clearance ............... every 800 hours
Change engine coolant ............... every 1000 hours

REPLACEMENT PARTS

Engine oil filter part number ............... HH160-32430
Engine fuel filter part number ............... 15451-43560
Engine fuel filter gasket part number ............... 15351-43320 and 15451-96830
Primary air filter part number ............... 15571-11210
Secondary air filter part number ............... 15571-11180
Hydraulic filter part number ............... 35861-82630 and 36330-63460
Drive belt part number ............... 15451-97010

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294