________________________________________________________________________________________
Kubota M8200 Maintenance
The
Kubota M8200 is a 2WD or 4WD utility tractor from M-series. Thid model was
manufactured between 1997 and 2005. The Kubota M8200 tractor is powered by 202.1
cu.in (3.3L) Kubota V3300 4-stroke 4-cylinder direct Injection naturally
aspirated liquid-cooled disel engine with a rated power of 85.3 hp (63.6 kW).
The Kubota M8200 is fitted with two types of transmission. Type 1:
Synchronized shuttle transmission with 8 forward and 8 reverse gears.
Type 2: Power shuttle transmission with 8 forward and 8 reverse gears.
The maximum forward speed - 20.7 mph (33.3 km/h), maximum reverse speed
- 20.7 mph (33.3 km/h).
The open center hydraulic system used a gear pump with a flow rate of 17
gallons per minute (64.5 liters per minute). The main relief pressure is
195 bar (2825 psi). The M8200 is equipped with a hydrostatic power
steering, mechanical wet disc brakes, 7.50-18 (AG) or 9.5L-15 (Turf) 2WD
front tires, 12.4-24 (AG) or 27x8.50-15 (Industrial) 4WD front tires,
12.4-24 (AG) or 18.4-26 (Turf) 2WD rear tires, and 18.4-30 (AG) or
15-19.5 (Industrial) 4WD rear tires.
The wheelbase is 88.6" (2250 mm). The tractor is compatible with a
Kubota LA1251 front-end loader with lift capacity to full height of 2755
lbs (1250 kg), or Kubota LA1301 front-end loader with lift capacity to
full height of 2755 lbs (1250 kg).
| Engine oil capacity, gal (L) |
2.8 (10.7) |
| Engine coolant capacity, gal (L) |
2.4 (9.0) |
| Hydraulic/transmission fluid capacity, gal (L) |
13.7 (52.0) |
| Front axle oil capacity, gal (L) |
2.25 (8.5) |
| Recommended Oil and Fluid |
| Engine oil type |
SAE 20, SAE 30, SAE 10W-30, 10W-40. API Service category CC, CD |
| Engine coolant type |
Kubota Antifreeze/Coolant |
| Hydraulic/transmission fluid type |
Kubota UDT or Kubota Super UDT Fluid |
| Front axle oil type |
Kubota UDT, SAE 80, SAE 80W-90 Gear Oil |
| Check hydraulic/transmission fluid level |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Check battery and clean terminals |
Every 100 hours |
| Clean primary engine air filter element |
Every 100 hours |
| Inspect and adjust fan belt |
Every 100 hours |
| Adjust parking and service brakes |
Every 100 hours |
| Change engine oil |
Every 200 hours |
| Clean cab air filters |
Every 200 hours |
| Check power steering oil line |
Every 200 hours |
| Check and adjust engine idling |
Every 200 hours |
| Replace hydraulic/transmission oil filter |
Every 300 hours |
| Replace engine oil filter |
Every 400 hours |
| Replace engine fuel filter |
Every 400 hours |
| Clean water separator |
Every 400 hours |
| Change hydraulic/transmission fluid |
Every 600 hours |
| Change front axle oil |
Every 600 hours |
| Check and adjust valve clearance |
Every 800 hours |
| Replace primary engine air filter element |
Every 1000 hours |
| Replace secondary engine air filter |
Every 1000 hours |
| Replace cab air filters |
Every 1000 hours |
| Check fuel injection nozzles |
Every 1500 hours |
| Flush cooling system and add new coolant |
Every 2000 hours |
| Engine oil filter part number |
HH1C0-32430, 1C020-32430 |
| Engine fuel filter part number |
1C011-43013, 16631-43560 (Element) |
| Engine fuel filter gasket part number |
1C011-43330 |
| Primary engine air filter part number |
59700-26112 (Element) |
| Secondary engine air filter part number |
55231-26150 (Element) |
| Cab air filter part number |
T0270-72070, TA043-71600 |
| Hydraulic oil filter part number |
HH3A0-82623 or 3A431-82623 |
| Drive belt part number |
1C010-97010 |
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
