________________________________________________________________________________________
Kubota M9000 Maintenance
The
Kubota M9000 is a M-Series utility tractor. This model was manufactured from 1997 to
2005. The Kubota M9000 driveline components: A V3300-TI-E vertical four-cylinder
naturally aspirated diesel engine and synchronized shuttle transmission with 8
forward and 8 reverse gears, or 8-speed power shuttle transmission.
A 3.3L engine output rating is 92.1 Hp (68.7 kW) at 2600 rpm. Max.
forward and reverse speed - 20.7 mph (33.3 kph). The open center
hydraulic system includes a gear pump with fluid flow rate of 23.1 gpm
(87.4 lpm). The main relief pressure is 2825 psi (180 bar). The rear lift
capacity is 4630 lbs at 600 mm behind pin.
The 4-wheel drive models are equipped with 12.4x24 front tyres and
18.4x30 rear tyres. The 7.50x18 front tyres and 16.9x28 rear tyres fit two
wheel drive tractors. The wheelbase is 88.6 inches (2250 mm). Compatible
front end loaders for the Kubota M9000 tractor: LA1251 loader with a
lift capacity to max height of 2755 lbs (1250 kg), or LA1301 loader with
a lift capacity to max height of 2750 lbs (1248 kg).
| Engine oil capacity, gal (L) |
2.8 (10.7) |
| Engine coolant capacity, gal (L) |
2.4 (9.0) |
| Hydraulic/transmission fluid capacity, gal (L) |
13.7 (52.0) |
| Front axle oil capacity, gal (L) |
2.5 (9.5) |
| Recommended Oil and Fluid |
| Engine oil type |
SAE 20, SAE 30, SAE 10W-30, 10W-40. API Service category CC, CD |
| Engine coolant type |
Kubota Antifreeze/Coolant |
| Hydraulic/transmission fluid type |
Kubota UDT or Kubota Super UDT Fluid |
| Front axle oil type |
Kubota UDT, SAE 80, SAE 80W-90 Gear Oil |
| Check hydraulic/transmission fluid level |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Check battery and clean terminals |
Every 100 hours |
| Clean primary engine air filter element |
Every 100 hours |
| Inspect and adjust fan belt |
Every 100 hours |
| Adjust parking and service brakes |
Every 100 hours |
| Change engine oil |
Every 200 hours |
| Clean cab air filters |
Every 200 hours |
| Check power steering oil line |
Every 200 hours |
| Check and adjust engine idling |
Every 200 hours |
| Replace hydraulic/transmission oil filter |
Every 300 hours |
| Replace engine oil filter |
Every 400 hours |
| Replace engine fuel filter |
Every 400 hours |
| Clean water separator |
Every 400 hours |
| Change hydraulic/transmission fluid |
Every 600 hours |
| Change front axle oil |
Every 600 hours |
| Check and adjust valve clearance |
Every 800 hours |
| Replace primary engine air filter element |
Every 1000 hours |
| Replace secondary engine air filter |
Every 1000 hours |
| Replace cab air filters |
Every 1000 hours |
| Check fuel injection nozzles |
Every 1500 hours |
| Flush cooling system and add new coolant |
Every 2000 hours |
| Engine oil filter part number |
HH1C0-32430, 1C020-32430 |
| Engine fuel filter part number |
1C011-43013, 16631-43560 (Element) |
| Engine fuel filter gasket part number |
1C011-43330 |
| Primary engine air filter part number |
59700-26112 (Element) |
| Secondary engine air filter part number |
55231-26150 (Element) |
| Cab air filter part number |
T0270-72070, TA043-71600 |
| Hydraulic oil filter part number |
33960-82630 or HH330-82630 |
| Drive belt part number |
1G541-97010 |
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
