________________________________________________________________________________________

Home / Farm Tractors / Kubota Tractors / Kubota MK5000

Kubota MK5000 Maintenance

The Kubota MK5000 compact utility tractor was manufactured between 2015 and 2017. The Kubota MK5000 driveline consists of Kubota V2403-M-DI vertical 4-cylinder turbocharged diesel engine and 8x8 gear shift partially synchronized transmission. A 148.5 cubic inches (2.4 L) engine has a cylinder bore of 3.43" (87 mm), piston stroke of 4.04" (102 mm), and rated power of 48.4 hp (35.6 kW). The maximum forward speed - 19 mph (30.4 km/h), maximum reverse speed - 19 mph (30.4 km/h).

The open center hydraulic system includes a gear pump with rated fluid flow of 8 gpm (30.5 lpm). The hydraulic system pressure is 180 bar (2600 psi). The Kubota MK5000 is equipped with a hydrostatic power steering, mechanical wet disc brakes, 9.50x16 or 8.00x16 front tyres, and 13.6x28 or 12.4x28 rear tyres. The wheelbase is 74.9" (1895 mm). The tractor is compatible with Kubota LA1065EC front-end loader with a lift capacity to full height of 2090 lbs (948 kg).

REFILL CAPACITIES

Engine oil capacity, gal (L) ............... 2.5 (9.4)
Engine coolant capacity, gal (L) ............... 1.7 (6.5)
Hydraulic/transmission fluid capacity, gal (L) ............... 11.6 (44.0)
Front axle oil capacity, gal (L) ............... 2.25 (8.5)

RECOMMENDED OIL AND FLUID

Engine oil type ............... SAE20, SAE10W-30, or SAE15W-40
Engine coolant type ............... Kubota Antifreeze and clean water mix
Hydraulic/transmission fluid type ............... Kubota Super UDT-2 or equivalent
Front axle oil type ............... Kubota Super UDT-2 or SAE80, SAE 90 gear oil

SERVICE INTERVALS

Check battery condition ............... every 100 hours
Check fan belt ............... every 100 hours
Clean primary air filter element ............... every 100 hours
Clean secondary air filter element ............... every 100 hours
Replace HST transmission filter ............... every 200 hours
Change engine oil ............... every 400 hours
Replace engine oil filter ............... every 400 hours
Replace fuel filter ............... every 400 hours
Replace hydraulic oil filter ............... every 400 hours
Change transmission fluid ............... every 400 hours
Change front axle case oil ............... every 800 hours
Adjust engine valve clearance ............... every 800 hours
Replace primary air filter element ............... every 1000 hours
Replace secondary air filter element ............... every 1000 hours
Clean fuel injector nozzle ............... every 1500 hours
Change engine coolant ............... every 2000 hours

REPLACEMENT PARTS

Engine oil filter part number ............... HH164-32430
Engine fuel filter part number ............... 1A001-43160
Primary air filter part number ............... R1401-42270
Secondary air filter part number ............... R2401-42280
Hydraulic filter part number ............... W21TSHTA10
Drive belt part number ............... TC650-97020
Sump plug seal part number ............... 6C090-58960
Plug drain part number ............... 16427-33750

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294