________________________________________________________________________________________

Home / Farm Tractors / Mahindra Tractors / Mahindra 6530

Mahindra 6530 Tractor

The Mahindra 6530 is a two-wheel drive or four-wheel drive utility tractor from 30 Series. This model was manufactured from 2008 to 2020. The Mahindra 6530 tractor is powered by 152.4 cu.in (2.5 L) 4-cycle 3-cylinder direct injection turbo diesel engine with a rated power of 65 Hp (48.5 kW). The Mahindra 6530 is fitted with a two transmission options: synchro shuttle transmission with 8 forward and 8 reverse gears, or constant mesh transmission with 8 forward and 8 reverse gears.

The maximum travel speed (forward/reverse): 21.6 mph (34.8 km/h) and 20.9 mph (33.7 km/h). The open center hydraulic system has a gear pump with a rated capacity of 10.8 gpm (41 lpm). The 2WD models are equipped with 9.50x15 front tires and 16.9x28 rear tires. The 11.2x24 front tires and 16.9x30 rear tires are used for 4WD tractors. Compatible attachments for the tractor: Mahindra ML266 front end-loader with a maximum lift height of 128" (3250 mm), and Mahindra 50B backhoe with maximum digging depth of 133" (3370 mm).

Engine Specs

Engine Model ............... Mahindra
Engine Type ............... 4-cycle direct injection turbo intercooled diesel
Number of Cylinders ............... 3, inline
Total Displacement, cu in (L) ............... 152.4 (2.49)
Cylinder Bore, in (mm) ............... 3.70 (94.0)
Piston Stroke, in (mm) ............... 3.53 (115.0)
Aspiration Type ............... Turbocharged
Rated Engine Power, hp (kW) ............... 65.0 (48.5)
Rated Engine Speed, rpm ............... 2200
Firing Order ............... 1-2-3
Compression Ratio ............... 17.2:1
Fuel System Type ............... Direct injection
Fuel System Control ............... Mechanical
Lubrication System ............... Forced by trochoidal pump
Cooling System ............... Pressurized radiator, forced circulation with water pump
Fuel Tank Capacity, gal (L) ............... 17.1 (65.0)
Oil Capacity, qts (L) ............... 5.8 (5.5)
Coolant Capacity, qts (L) ............... 6.9 (6.5)
Electrical System Rating, Volts ............... 12
Charging System ............... Alternator
Alternator Rating, Amps ............... 55

Power Take Off

PTO Operational Type .............. Independent
PTO Horsepower, hp (kW) .............. 57.0 (42.5)
Rear PTO Speed, rpm .............. 540
Rear PTO / Engine Speed, rpm .............. 540/2059

Transmission

Transmission Type .............. Synchro shuttle with full synchromesh
Gearbox Type .............. 8F/8R
Number of Forward Gears .............. 8
Number of Reverse Gears .............. 8
Clutch Type .............. Dry disc
Maximum Forward Speed, mph (kph) .............. 19.3 (31.0)
Maximum Reverse Speed, mph (kph) .............. 18.7 (30.0)

Transmission Type .............. Constant mesh with synchro shuttle
Gearbox Type .............. 8F/8R
Number of Forward Gears .............. 8
Number of Reverse Gears .............. 8
Clutch Type .............. Dry disc
Maximum Forward Speed, mph (kph) .............. 21.6 (34.8)
Maximum Reverse Speed, mph (kph) .............. 20.9 (33.7)

Wheels and Tires

Drive Wheels .............. 2WD/4WD
Steering Configuration .............. Front steer
Steering System .............. Hydrostatic power
Brakes Type .............. Wet disc
Front Tire Size (2WD) ............. 9.50x15
Rear Tire Size (2WD) ............. 16.9x28
Front Tire Size (4WD) ............. 11.2x24
Rear Tire Size (4WD) ............. 16.9x30
Front Tire Size (Industrial) ............. 12.5/80x18
Rear Tire Size (Industrial) ............. 19.5Lx24

Hydraulic System

Hydraulic System Type .............. Open center
Implement Pump Type .............. Gear
Implement Pump Flow, gpm (Lpm) .............. 10.8 (41.0)
Steering Pump Flow, gpm (Lpm) .............. 4.8 (18.3)
Number of Standard Remote Valves .............. 2
3-Point Hitch Category .............. 2/1
Draft Sensing or Lift Control .............. Position and draft control
Rear Lift Capacity at Pin, lbs (kg) .............. 3970 (1800)

Dimensions and Weight

Overall Length (2WD), in (mm) .............. 138 (3510)
Overall Length (4WD), in (mm) .............. 145 (3685)
Overall Width (2WD), in (mm) .............. 77.3 (1965)
Overall Width (4WD), in (mm) .............. 81 (2055)
Overall Height (ROPS), in (mm) ............. 100.5 (2555)
Turning Radius (2WD), in (mm) .............. 141.7 (3600)
Turning Radius (4WD), in (mm) .............. 165.4 (4200)
Weight (2WD), lbs (kg) .............. 5560 (2530)
Weight (4WD), lbs (kg) .............. 6300 (2865)

Front End Loader

Loader Model .............. Mahindra ML266
Maximum Lift Height (Pivot Pin), in (mm) .............. 128 (3250)
Clearance with Bucket Dumped, in (mm) .............. 104 (2640)
Reach at Maximum Overall Height, in (mm) .............. 29.5 (740)
Dump Angle, deg .............. 40
Rollback Angle, deg .............. 22
Lift Capacity to Full Height (Pivot Pin), lbs (kg) .............. 3150 (1430)
Breakout Force (Pivot Pin), lbs (kg) .............. 5050 (2290)
Bucket Overall Width, in (mm) .............. 78 (1980)
Loader Weight, lbs (kg) ............. 1960 (890)

Backhoe

Backhoe Model ............. Mahindra 511
Digging Depth (Max), in (mm) ............. 133 (3370)
Digging Depth (2-ft Flat), in (mm) ............. 132 (3350)
Reach from Swing Pivot, in (mm) ............. 173 (4390)
Loading Overall Height, in (mm) ............. 96 (2430)
Bucket Rotation, deg ............. 180
Swing Arc, deg ............. 180
Transport Overall Height, in (mm) ............. 93 (2360)
Bucket Digging Force, lbs (kg) ............. 5675 (2575)
Dipperstick Digging Force, lbs (kg) ............. 3055 (1390)
Backhoe Weight, lbs (kg) ............. 1600 (725)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294