Home / Farm Tractors / New Holland Tractors / NH T4.75

New Holland T4.75 Powerstar Tractor

The New Holland T4.75 is a 2WD or 4WD utility tractor from T4 PowerStar series. This model was manufactured between 2012 to 2017. The New Holland T4.75 tractor is powered by 207 cu.in (3.4L) FPT F5C 4-cylinder 8-valve direct injection turbocharged diesel engine with a rated power of 74 hp (55.3 kW) and 310 Nm (229 lb-ft) of max torque at 1500 rev/min.

The New Holland T4.75 Powerstar is fitted with 2 types of transmission. Type 1: 12x12 Synchro Shuttle transmission with mechanical shuttle shift. Type 2: 12x12 Power Shuttle transmission with hydraulic shuttle shift. The maximum forward speed - 18.8 mph (30 km/h). The open center hydraulic system includes a dual gear pump with fluid flow rate of 12.5 gpm (47.5 lpm). The 3-Point Hitch has a lift capacity of 3665 lbs (1660 kg) at 24" (610mm) behind pin.

The New Holland T4.75 Powerstar is equipped with a hydrostatic power steering, wet disc brakes, 11.2x24 (2WD) or 12.4x24 (4WD) front tires, and 16.9x30 (2WD) or 18.4x30 (4WD) rear tires. The wheelbase is 85.8" (2180 mm) for models with 2-wheel drive and 83.8" (2130 mm) for models with 4-wheel drive. The tractor is compatible with a New Holland 655TL loader with lift capacity to full height of 2356 lbs (1068 kg) at 31.5" (800 mm).

Engine Model FPT F5C
Engine Type 4-cylinder 8-valve turbocharged diesel
Number of Cylinders Four
Displacement, cu.in (L) 207 (3.40)
Engine Bore, in (mm) 3.90 (99.0)
Engine Stroke, in (mm) 4.33 (110.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 74.0 (55.3)
Rated Engine Speed, rpm 2300
Maximum Torque, Nm (lb-ft) 310 (229)
Torque Speed, rpm 1500
Fuel System Common rail direct injection
Emission Level Tier 4B
Fuel Tank Capacity, gal (L) 23.8 (90.0)
Oil Capacity, qts (L) 10.1 (9.5)
Coolant Capacity, qts (L) 16.9 (16.0)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 120

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 61.5 (45.6)
PTO Speed, rpm 540/540E
PTO / Engine Speed, rpm 540/1958
PTO / Engine Speed, rpm 540E/1592

Standard Transmission
Transmission Type Synchro Shuttle
Gearbox Type 12F/12R (20F/20R w/creeper), mechanical shuttle shift
Number of Forward Gears 12 (20)
Number of Reverse Gears 12 (20)
Synchronized Gears 4
Non-synchronized Ranges 3
Maximum Speed, mph (kph) 18.8 (30.0)
Minimum Speed (Creeper), mph (kph) 0.06 (0.1)

Optional Transmission
Transmission Type Power Shuttle
Gearbox Type 12F/12R (20F/20R w/creeper), hydraulic shuttle shift
Number of Forward Gears 12 (20)
Number of Reverse Gears 12 (20)
Synchronized Gears 4
Non-synchronized Ranges 3
Maximum Speed, mph (kph) 18.8 (30.0)
Minimum Speed (Creeper), mph (kph) 0.06 (0.1)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Wet disc
Front Tire Size (2WD) 11.2x24
Rear Tire Size (2WD) 16.9x30
Front Tire Size (4WD) 12.4x24
Rear Tire Size (4WD) 18.4x30

Hydraulic System
Hydraulic System Type Open center
Implement Pump Type Dual gear
Implement Pump Flow, gpm (Lpm) 12.5 (47.5)
Steering Pump Flow, gpm (Lpm) 7.3 (27.5)
Number of Standard Remote Valves 2/3
3-Point Hitch Category 2/1
Draft Sensing or Lift Control Mechanical draft control
Standard Lift Capacity at 24" (610mm) behind pin, lb (kg) 3665 (1660)
Standard Lift Capacity at pin, lb (kg) 4885 (2215)

Dimensions and Weight
Wheelbase (2WD), in (mm) 85.8 (2180)
Wheelbase (4WD), in (mm) 83.8 (2130)
Length, in (mm) 152.7 (3880)
Height (ROPS), in (mm) 101.3 (2575)
Height (Cab), in (mm) 97.6 (2480)
Overall Width, in (mm) 79.1 (2010)
Ground Clearance, in (mm) 16.5 (420)
Turning Radius (2WD), in (mm) 145.6 (3700)
Turning Radius (4WD), in (mm) 149.6 (3800)
Weight (2WD, ROPS), lb (kg) 5015 (2280)
Weight (4WD, ROPS), lb (kg) 5940 (2700)
Weight (2WD, Cab), lb (kg) 5610 (2550)
Weight (4WD, Cab), lb (kg) 6225 (2830)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294