Home / Farm Tractors / New Holland Tractors / NH T5.120

New Holland T5.120 Autocommand

The New Holland T5.120 is a 4WD farm tractor. This model was manufactured from 2015 to 2020. The New Holland T5.120 powertrain system components: FPT Industrial Nef 4-cylinder inline 4 valve turbocharged diesel engine and Auto Command continuously variable transmission (CVT) with infinite forward and reverse gears.

A 274 cubic inches (4.5 L) engine has a cylinder bore of 4.09" (104 mm), piston stroke of 5.20" (132 mm), rated power of 120 hp (88 kW), and max torque of 551 Nm (408 lb-ft) at 1300 rpm. Max. travel speed (forward and reverse): 25 mph (40 km/h). The closed center load sending hydraulic system includes a fixed displacement pump with rated fluid flow of 21.1 gpm (80 lpm). The hydraulic pressure is 200 bar (2900 psi).

The tractor is equipped with a hydrostatic power steering system, hydraulic wet disc brakes, 12.4R24 or 440/65R24 front tires, and 18.4R34 or 540/65R34 rear tires. The wheel base is 98" (2490 mm). Compatible attachments for the New Holland T5.120: a NH 825TL MSL loader with lift capacity to max height of 3086 lbs (1400 kg) at 31.5" (800 mm), and NH 835TL MSL loader with lift capacity to max height of 3836 lbs (1740 kg) at 31.5" (800 mm).

Engine Model FPT Industrial Nef
Engine Type 4-cylinder 4 valve turbocharged diesel
Number of Cylinders Four, in-line
Displacement, cu.in (L) 274 (4.49)
Engine Bore, in (mm) 4.09 (104.0)
Engine Stroke, in (mm) 5.20 (132.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 120.0 (88.0)
Rated Engine Speed, rpm 2200
Maximum Torque, Nm (lb-ft) 551 (408)
Torque Speed, rpm 1300
Firing Order 1-3-4-2
Fuel System High pressure common rail
Fuel System Control Electronic
Emission Level Tier 4B
Emission Control Selective catalytic reduction (SCR)
Fuel Tank Capacity, gal (L) 47.4 (180.0)
Oil Capacity, qts (L) 13.5 (12.8)
Coolant Capacity, qts (L) 10.6 (10.0)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 120

Power Take-Off
PTO Operational Type Direct drive
PTO Horsepower, hp (kW) 110.0 (81.5)
PTO Speed, rpm 540/1000
PTO Speed, rpm 540/540E/1000
PTO Speed, rpm 540E/1000/1000E
PTO / Engine Speed, rpm 540/1938
PTO / Engine Speed, rpm 540E/1546
PTO / Engine Speed, rpm 1000/1893
PTO / Engine Speed, rpm 1000E/1621

Transmission Model Auto Command
Transmission Type Continuously variable transmission (CVT)
Number of Forward Gears Infinite
Number of Reverse Gears Infinite
Driving Modes Auto, Cruise, Manual, PTO
Maximum Speed, mph (kph) 25.0 (40.0)
Minimum Speed, mph (kph) 0.012 (0.02)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Hydraulic wet disc
Front Tire Size (Std) 12.4R24
Rear Tire Size (Std) 18.4R34
Front Tire Size (Opt) 440/65R24
Rear Tire Size (Opt) 540/65R34

Hydraulic System
Hydraulic System Type Closed center load sending (CCLS)
Implement Pump Type Fixed displacement
Implement Pump Flow, gpm (Lpm) 21.1 (80.0)
Hydraulic Pressure, Bar (psi) 200 (2900)
Steering Pump Flow, gpm (Lpm) 9.6 (36.3)
Steering Pressure, Bar (psi) 230 (3330)
Number of Standard Remote Valves 4
3-Point Hitch Category 2
Draft Sensing or Lift Control Electronic draft control
Lift Capacity at pin, lb (kg) 11925 (5420)

Dimensions and Weight
Wheelbase, in (mm) 98 (2490)
Length, in (mm) 164.1 (4170)
Height (Cab), in (mm) 106.1 (2695)
Overall Width, in (mm) 90 (2285)
Turning Radius, in (mm) 181.7 (4615)
Weight (Shipping), lb (kg) 12100 (5500)
Weight (Maximum), lb (kg) 19360 (8800)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294