________________________________________________________________________________________

Home / Farm Tractors / Ford Tractors / Ford 1600

Ford 1600 Tractor

The Ford 1600 compact utility tractor was manufactured from 1976 to 1979. The Ford 1600 is equipped with a 77.6 cubic inches Shibaura LE892 two-cylinder liquid cooled diesel engine rated at 25 hp (18.6 kW). The transmission includes a dry clutch and gearbox with 9 forward and 3 reverse gears. Max. travel speed (forward/reverse): 8.7 mph (14 km/h) and 7.2 (11.6 km/h).

The open center hydraulic system includes a gear pump with rated fluid flow of 4.2 gpm (15.9 lpm). The hydraulic system pressure is 98 bar (1420 psi). The 2-wheel drive models are equipped with 5.00x15 front tires and 11.2x24 rear tires.

The 20x8.00-10 front tires and 13.6x16 rear tires are used for tractors with 4-wheel drive. The wheel base is 62.6" (1590 mm) for 4x2 (2WD) models and 66.3" (1680 mm) for 4x4 (4WD) models. The Ford 1600 tractor is compatible with a 60" mid-mount mower deck, and Ford 770 loader with a lift capacity to full height (at pin) of 700 lbs (317 kg).

Engine
Engine Model Shibaura LE892
Engine Type 2-cylinder, liquid cooled diesel
Number of Cylinders Two
Displacement, cu in (L) 77.6 (1.3)
Engine Bore, in (mm) 3.54 (90.0)
Engine Stroke, in (mm) 3.94 (100.0)
Aspiration Natural
Rated Engine Power, hp (kW) 25.0 (18.6)
Rated Engine Speed, rpm 2500
Idle Speed, rpm 750-2700
Compression 21:1
Air Cleaner Oil bath
Pre-Heating Glow plugs
Fuel Tank Capacity, gal (L) 5.8 (22.0)
Oil Capacity (2WD), qts (L) 5.3 (5.0)
Oil Capacity (4WD), qts (L) 4.2 (4.0)
Coolant Capacity, qts (L) 5.4 (5.1)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 35

Power Take-Off
PTO Operational Type Transmission
PTO Horsepower, hp (kW) 23.0 (17.2)
PTO Speed, rpm 540
PTO Output Shaft 6 Spline
PTO / Engine Speed, rpm 540/1955

Transmission
Transmission Type Gear
Gearbox Type 9F/3R
Number of Forward Gears 9
Number of Reverse Gears 3
Clutch Type Dry Disc
Clutch Disc Diameter, in (mm) 8.4 (212)
Oil Capacity, qts (L) 21.2 (20.1)
Maximum Forward Speed, mph (kph) 8.7 (14.0)
Maximum Reverse Speed, mph (kph) 7.2 (11.6)


Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Manual
Service Brake Differential mechanical expanding shoe
Front Tire Size (2WD) 5.0-15
Front Tire Size (4WD) 6.0-16
Rear Tire Size 11.2-24
Front Tire Size (Turf) 20x8.00-10
Rear Tire Size (Turf) 13.6-16
Front Tread (2WD), in (mm) 43-60 (1090-1520)
Front Tread (4WD), in (mm) 45-52 (1140-1320)
Rear Tread, in (mm) 48-60 (1210-1520)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 4.2 (15.9)
Hydraulic Pressure, Bar (psi) 98 (1420)
Hydraulic System Capacity, gal (L) 2.1 (7.9)
3-Point Hitch Category 1
Standard Lift Capacity at lift pin, lb (kg) 1700 (772)

Dimensions and Weight
Wheelbase (2WD), in (mm) 62.6 (1590)
Wheelbase (4WD), in (mm) 66.3 (1680)
Length (2WD), in (mm) 100 (2540)
Length (4WD), in (mm) 102 (2590)
Height, in (mm) 54.7 (1380)
Ground Clearance (2WD), in (mm) 14 (350)
Ground Clearance (4WD), in (mm) 13 (330)
Shipping Weight (2WD), lb (kg) 2300 (1040)
Shipping Weight (4WD), lb (kg) 2485 (1130)
Operating Weight, lb (kg) 2690 (1220)
Maximum Weight, lb (kg) 3850 (1745)

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294