________________________________________________________________________________________

Home / Farm Tractors / Ford Tractors / Ford 1900

Ford 1900 Tractor

The Ford 1900 is a Hundred series compact utility tractor. This model was manufactured by Shibaura built from 1979 to 1983. The Ford 1900 driveline consists of a Shibaura LEM853 3-cylinder liquid cooled diesel engine and gear transmission with 12 forward and 4 reverse gears.

A 87.2 cu.in (1.43 L) engine has a cylinder bore of 3.35" (85 mm), piston stroke of 3.31" (84 mm), and rated power of 30 hp (22.4 kW). The maximum travel speed (forward and reverse): 13.4 mph (21.6 km/h) / 9.2 mph (14.8 km/h). The open center hydraulic system includes a gear pump with flow rate of 7.8 lpm (29.5 gpm).

The hydraulic system pressure is 127 bar (1850 psi). The 4-wheel drive models are equipped with 20x8.00-10 front tires and 13.6-16 rear tires. The 5.00x15 front tires and 12.4x24 rear tires are used for tractors with 2-wheel drive. The wheel base is 63" (1600 mm) for 2WD models and 64.2" (1630 mm) for 4WD models.

The Ford 1900 tractor is compatible with the following attachments: Ford 915 mower deck with a cutting width of 60" (1520 mm), a 60" front-mount snow blower, Ford 771 front end loader with a lift capacity to full height of 1130 lbs (512 kg), and Ford 757 backhoe with a digging depth of 76" (1930 mm).

Engine
Engine Model Shibaura LEM853
Engine Type 3-cylinder, liquid cooled diesel
Number of Cylinders Three
Displacement, cu in (L) 87.2 (1.43)
Engine Bore, in (mm) 3.35 (85.0)
Engine Stroke, in (mm) 3.31 (84.0)
Aspiration Natural
Maximum Engine Power, hp (kW) 30.0 (22.4)
Rated Engine Power, hp (kW) 28.7 (21.4)
Rated Engine Speed, rpm 2800
Low Idle Speed, rpm 750
High Idle Speed, rpm 2950
Compression Ratio 21:1
Firing Order 1-2-3
Air Cleaner Type Oil bath
Pre-Heating Glow plugs
Fuel Tank Capacity, gal (L) 7.7 (29.1)
Oil Capacity, qts (L) 6.7 (6.3)
Coolant Capacity, qts (L) 7.2 (6.8)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 35

Power Take-Off
PTO Operational Type Transmission / Live (Opt)
PTO Horsepower, hp (kW) 26.9 (20.0)
Rear PTO Speed, rpm 540
Rear PTO / Engine Speed, rpm 540/1955
Front PTO Optional

Transmission
Transmission Type 12F/4R, Gear
Number of Forward Gears 12
Number of Reverse Gears 4
Clutch Type Single Plate
Oil Capacity, qts (L) 25.4 (24.0)
Maximum Forward Speed, mph (kph) 13.4 (21.6)
Maximum Reverse Speed, mph (kph) 9.2 (14.8)


Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Manual / Power
Service Brake Differential mechanical drum
Front Tire Size (2WD) 5.00-15
Front Tire Size (4WD) 6.00-16
Rear Tire Size 12.4-24
Front Tire Size (Turf) 20x8.00-10
Rear Tire Size (Turf) 13.6-16
Front Tread (2WD), in (mm) 43.5-57.5 (1100-1460)
Front Tread (4WD), in (mm) 44.5 (1130)
Rear Tread, in (mm) 45.7-61.1 (1160-1540)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 7.8 (29.5)
Hydraulic Pressure, Bar (psi) 127 (1850)
Hydraulic System Capacity, gal (L) 6.4 (24.2)
3-Point Hitch Category 1
Standard Lift Capacity at lift pin, lb (kg) 3815 (1728)

Dimensions and Weight
Wheelbase (2WD), in (mm) 63 (1600)
Wheelbase (4WD), in (mm) 64.2 (1630)
Length, in (mm) 118.8 (3010)
Overall Width, in (mm) 57.7 (1460)
Height (Exhaust), in (mm) 76.8 (1950)
Height (ROPS), in (mm) 86.3 (2190)
Ground Clearance (2WD), in (mm) 15.2 (380)
Ground Clearance (4WD), in (mm) 13.8 (350)
Weight (2WD), lb (kg) 2690 (1220)
Weight (4WD), lb (kg) 2920 (1325)

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294