Home / Farm Tractors / Ford Tractors / Ford 1900

Ford 1900 Tractor Maintenance

The Ford 1900 is a Hundred series compact utility tractor. This model was manufactured by Shibaura built from 1979 to 1983. The Ford 1900 driveline consists of a Shibaura LEM853 3-cylinder liquid cooled diesel engine and gear transmission with 12 forward and 4 reverse gears.

A 87.2 cu.in (1.43 L) engine has a cylinder bore of 3.35" (85 mm), piston stroke of 3.31" (84 mm), and rated power of 30 hp (22.4 kW). The maximum travel speed (forward and reverse): 13.4 mph (21.6 km/h) / 9.2 mph (14.8 km/h). The open center hydraulic system includes a gear pump with flow rate of 7.8 lpm (29.5 gpm).

The hydraulic system pressure is 127 bar (1850 psi). The 4-wheel drive models are equipped with 20x8.00-10 front tires and 13.6-16 rear tires. The 5.00x15 front tires and 12.4x24 rear tires are used for tractors with 2-wheel drive. The wheel base is 63" (1600 mm) for 2WD models and 64.2" (1630 mm) for 4WD models.

The Ford 1900 tractor is compatible with the following attachments: Ford 915 mower deck with a cutting width of 60" (1520 mm), a 60" front-mount snow blower, Ford 771 front end loader with a lift capacity to full height of 1130 lbs (512 kg), and Ford 757 backhoe with a digging depth of 76" (1930 mm).

Refill Capacities
Engine oil capacity, qts (L) 6.7 (6.3)
Engine coolant capacity, qts (L) 6.3 (6.0)
Transmission/Hydraulic system capacity, gal (L) 6.4 (24.0)
Front axle oil capacity, qts (L) 2.7 (2.5)

Recommended Oil and Fluid
Engine oil type SAE 10W-40, 15W-40, 10W-30, 15W-30, SAE 20W-20
Engine coolant type Antifreeze/Coolant
Transmission/Hydraulic fluid type 134D, SAE 10W-30
Front axle oil type 134D, Gearlube 80W-90

Service Intervals
Check engine oil level Every 10 hours
Check the hydraulic/transmission fluid level Every 10 hours
Check engine air filter Every 10 hours
Check coolant level in radiator Every 10 hours
Check battery and clean terminals Every 50 hours
Check front axle oil Every 50 hours
Inspect and adjust alternator belt Every 50 hours
Lubricate axle hub bearings Every 50 hours
Change engine oil Every 100 hours
Clean engine air filter Every 100 hours
Clean engine fuel filter Every 100 hours
Replace engine oil filter Every 200 hours
Replace engine fuel filter Every 200 hours
Adjust parking and service brakes Every 200 hours
Change hydraulic/transmission fluid Every 300 hours
Change front axle lubricant Every 300 hours
Clean hydraulic oil strainer Every 300 hours
Replace engine air filter Every 500 hours
Check and adjust engine idling Every 500 hours
Check and adjust valve clearance Every 500 hours
Flush cooling system and add new coolant Every 1000 hours

Replacement Parts
Engine oil filter part number 86546613, E1NN6714BB
Engine fuel filter part number 87300041
Engine air filter part number SBA314530122
Hydraulic oil filter part number Metal Strainer




Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294