________________________________________________________________________________________

Home / Farm Tractors / Ford Tractors / Ford 2910

Ford 2910 Tractor

The Ford 2910 is a 2WD or 4WD utility tractor from Ten Utility series. This model was manufactured between 1983 and 1989. The Ford 2910 tractor is powered by Ford vertical 3-cylinder water cooled diesel engine with a maximum output power of 44 Hp (32.8 kW) and 160 Nm (118 lb-ft) of max torque at 1400 rpm.

The Ford 2910 is equipped with two types of transmission. Type 1: 8x2 Dual Range transmission. Type 2: 8x4 synchromesh transmission. The maximum forward speed - 18.5 mph (29.8 km/h), maximum reverse speed - 8.9 mph (14.3 km/h).

The open center hydraulic system includes a gear pump with a rated capacity of 7.7 gpm (29.2 lpm). The hydraulic pressure is 2500 psi (173 bar). The Ford 2910 is fitted with 5.5x16 (2WD) or 8.3x24 (4WD) front tires and 12.4x28 rear tires. The wheel base is 77.5 in (1960 mm) for 2-wheel drive models and 84.1 in (2130 mm) for 4-wheel drive models.

The tractor can be equipped with the following attachments: Ford 776A loader with lift capacity to max height of 2500 lbs (1134 kg), and Ford 776B loader with breakout force of 3750 lbs (1701 kg).

Engine
Engine Model Ford
Engine Type Vertical 3-cylinder water cooled diesel
Number of Cylinders 3
Displacement, cu in (L) 175 (2.9)
Engine Bore, in (mm) 4.20 (107.0)
Engine Stroke, in (mm) 4.20 (107.0)
Rated Engine Power, hp (kW) 44.0 (32.8)
Rated Engine Speed, rpm 2000
Maximum Torque, Nm (ft-lbs) 160 (118)
Torque Speed, rpm 1400
Compression 17.3:1
Firing Order 1-2-3
Air Cleaner Dry Type
Fuel Tank Capacity, gal (L) 13.0 (49.2)
Oil Capacity, qts (L) 8.0 (7.6)
Coolant Capacity, qts (L) 13.8 (11.4)
Electrical System Rating, Volts 12
Battery Rating, A/h 128
Charging System Alternator
Alternator Rating, Amps 32

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 36.0 (26.8)
PTO Speed, rpm 540
PTO / Engine Speed, rpm 540/1800

Standard Transmission
Transmission Type Dual Range
Gearbox Type 8F/2R
Number of Forward Gears 8
Number of Reverse Gears 2
Clutch Type Dry disc
Clutch Disc Diameter, in (mm) 13 (330)
Oil Capacity, qts (L) 12.7 (12.0)
Maximum Forward Speed, mph (kph) 18.5 (29.8)
Maximum Reverse Speed, mph (kph) 8.9 (14.3)

Optional Transmission
Transmission Type 8F/4R, Synchromesh
Gearbox Type 8F/4R
Number of Forward Gears 8
Number of Reverse Gears 4
Oil Capacity, qts (L) 9.9 (9.4)
Maximum Forward Speed, mph (kph) 18.3 (29.4)
Maximum Reverse Speed, mph (kph) 6.7 (10.7)


Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Power assist
Brakes Type Differential wet disc
Front Tire Size (2WD) 5.5-16
Front Tire Size (4WD) 8.3-24
Rear Tire Size 12.4-28
Front Tread (2WD), in (mm) 56-72 (1420-1820)
Front Tread (4WD), in (mm) 52-80 (1320-2030)
Rear Tread, in (mm) 56-80 (1420-2030)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow (Std), gpm (Lpm) 7.7 (29.2)
Implement Pump Flow (Opt), gpm (Lpm) 12.8 (48.4)
Steering Flow, gpm (Lpm) 3.6 (13.5)
Hydraulic Pressure, Bar (psi) 173 (2500)
Hydraulic System Capacity, gal (L) 12.2 (45.8)
3-Point Hitch Category 1
Draft Sensing or Lift Control Position and top-link draft control
Standard Lift Capacity at lift pin, lb (kg) 2940 (1330)

Dimensions and Weight
Wheelbase (2WD), in (mm) 77.5 (1960)
Wheelbase (4WD), in (mm) 84.1 (2130)
Length, in (mm) 127.2 (3230)
Height (Hood), in (mm) 52.7 (1330)
Height (ROPS), in (mm) 93.7 (2370)
Overall Width, in (mm) 68.4 (1730)
Ground Clearance (2WD), in (mm) 21.5 (540)
Ground Clearance (4WD), in (mm) 13.1 (330)
Operating Weight (2WD), lb (kg) 4410 (2000)
Operating Weight (4WD), lb (kg) 4950 (2245)
Ballasted Weight, lb (kg) 6000 (2720)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294