________________________________________________________________________________________

Home / Farm Tractors / Ford Tractors / Ford 6600

Ford 6600 Tractor

The Ford 6600 is a 2WD or 4WD utility tractor. This model was manufactured from 1975 to 1981. The Ford 6600 tractor is powered by 256 cu.in (4.2 L) Ford four stroke 4-cylinder liquid-cooled diesel engine.

The engine has a cylinder bore of 4.4" (112 mm), piston stroke of 4.2" (107 mm), and rated power of 75.5 hp (56.3 kW). The Ford 6600 is fitted with two types of transmission. 1st type: 8x2 gear transmission. 2nd type: 16x4 Dual Power two-speed powershift transmission.

The maximum travel speed (forward and reverse): 17.4 mph (28 km/h) / 8.4 mph (13.5 km/h). The open center hydraulic system used a gear pump with a flow of 9.7 gpm (36.8 lpm). The hydraulic pressure is 145 bar (2100 psi). The tractor was equipped with a power steering system, differential mechanical wet disc brakes, 7.50x16 front tires, and 16.9x30 rear tires. The wheelbase is 88 in (2230 mm).

The Ford 6600 is compatible with the following attachments: Ford 772 loader with lift capacity to full height of 2460 lbs (1115 kg), Ford 774 loader with lift capacity to max height of 2000 lbs (907 kg), and Ford 772QT loader with lift capacity to max height of 2500 lbs (1134 kg).

Engine
Engine Model Ford
Engine Type Four stroke 4-cylinder liquid-cooled diesel
Engine Gross Power, hp (kw) 75.5 (56.3)
Number of Cylinders 4
Engine Bore, in (mm) 4.40 (112)
Engine Stroke, in (mm) 4.20 (107)
Displacement, cu.in (L) 256 (4.21)
Compression Ratio 16.3:1
Firing Order 1-3-4-2
Low Idle Speed, rpm 775
High Idle Speed, rpm 2375
Rated Speed, rpm 2100
Valve Clearance (Intake), in (mm) 0.014-0.018 (0.36-0.46)
Valve Clearance (Exhaust), in (mm) 0.017-0.021 (0.43-0.53)
Coolant Pump Type Impeller
Fuel Capacity, gal (L) 21.0 (79.5)
Cooling System Capacity, qts (L) 13.0 (12.3)
Engine Oil Capacity, qts (L) 9.0 (8.5)
Electrical System Rating, Volts 12
Alternator Rating, Amps 51

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 70.0 (52.3)
PTO Speed (Std), rpm 540
PTO / Engine Speed (Std), rpm 540/1900
PTO Speed (Opt), rpm 1000

Standard Transmission
Transmission Type Gear
Gearbox Type 8F/2R
Number of Forward Gears 8
Number of Reverse Gears 2
Clutch Type Dry disc
Clutch Disc Diameter, in (mm) 12 (304)
Maximum Forward Speed, mph (kph) 17.4 (28.0)
Maximum Reverse Speed, mph (kph) 8.4 (13.5)

Optional Transmission
Transmission Type Dual Power
Gearbox Type 16F/4R, 2-Speed powershift
Number of Forward Gears 16
Number of Reverse Gears 4
Clutch Type Dry disc
Maximum Forward Speed, mph (kph) 15.9 (25.6)
Maximum Reverse Speed, mph (kph) 7.7 (12.3)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front Steer
Steering System Power
Service Brake Differential mechanical wet disc
Front Tire Size 7.5-16
Rear Tire Size 16.9-30
Front Tread, in (mm) 52.5-80.5 (1330-2040)
Rear Tread, in (mm) 52-80 (1320-2030)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Type Gear
Implement Pump Flow, gpm (Lpm) 9.7 (36.8)
Steering Pump Flow, gpm (Lpm) 3.6 (13.5)
Hydraulic Pressure, Bar (psi) 145 (2100)
Number of Standard Remote Valves 1 or 2
3-Point Hitch Category 2
Draft Sensing or Lift Control Top-link draft sensing
Standard Lift Capacity at lift pin, lb (kg) 4040 (1830)

Dimensions and Weight
Wheelbase, in (mm) 88 (2230)
Overall Length, in (mm) 153.3 (3890)
Height (Hood), in (mm) 68.5 (1730)
Height (Cab), in (mm) 106.6 (2700)
Width, in (mm) 73.2 (1850)
Ground Clearance, in (mm) 18 (450)
Weight (ROPS), lb (kg) 5880 (2670)
Weight (Cab), lb (kg) 7020 (3185)
Weight (Ballasted), lb (kg) 9700 (4400)

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294