________________________________________________________________________________________
John Deere 1020 Maintenance
The
John Deere 1020 is a 4x2 utility tractor from New Generation series. This model
was manufactured between 1965 to 1973. The John Deere 1020 tractor is powered by
4-stroke 3-cylinder water-cooled naturally aspirated diesel engine. A 152 cubic
inches (2.5 L) engine has a cylinder bore of 3.86" (98 mm), piston stroke of
3.86" (98 mm), and rated power of 40 hp (28.5 kW).
The John Deere 1020 was fitted with 3 types of transmission. 1st type:
8x4 Collar shift gear transmission. 2nd type: 16x8 two-speed power shift
transmission. 3rd type: Power shuttle transmission with 8 forward and 4
reverse gears.
Max. travel speed (forward and reverse): 16.6 mph (26.7 km/h) / 9.5 mph
(15.2 km/h). The closed center hydraulic system used a gear pump with a
rated capacity of 10.5 gpm (39.7 lpm). The standard lift capacity is
2010 lbs (912 kg ) at lift pin. The JD 1020 tractor is fitted with
5.50x16 front tires and 13.6x28 rear tires. The wheel base is 74 in
(1870 mm).
| Engine oil capacity, gal (L) |
1.5 (5.7) |
| Engine coolant capacity, gal (L) |
2.75 (10.4) |
| Hydraulic/Transmission system capacity, gal (L) |
10.0 (37.9) |
| Belt pulley oil capacity, pts (L) |
2.5 (1.2) |
| Recommended Oil and Fluid |
| Engine oil type |
Torq-Gard, MIL-L-2104B, SAE 30, SAE 10W-20, 5W-20. API Service category SD |
| Engine coolant type |
Cool-Gard Premix Coolant |
| Hydraulic/Transmission fluid type |
JD 303 tractor hydraulic fluid |
| Belt pulley oil type |
JD 303 tractor hydraulic fluid or SAE 80 lubricant |
| Check battery and clean terminals |
Every 50 hours |
| Check hydraulic/transmission fluid level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Change engine oil |
Every 100 hours |
| Replace engine oil filter |
Every 200 hours |
| Inspect and adjust alternator belt |
Every 200 hours |
| Check belt pulley oil level |
Every 200 hours |
| Clean air cleaner oil cap or dry element |
Every 200 hours |
| Change engine fuel filter (diesel) |
Every 500 hours |
| Clean carburetor strainer screen (gasoline) |
Every 500 hours |
| Check injection timing (diesel) |
Every 500 hours |
| Clean or replace spark plug (gasoline) |
Every 500 hours |
| Replace hydraulic oil filter |
Every 500 hours |
| Change belt pulley oil |
Every 500 hours |
| Adjust parking and service brakes |
Every 500 hours |
| Check and adjust valve clearance |
Every 500 hours |
| Change hydraulic/transmission fluid |
Every 1000 hours |
| Replace air cleaner dry element |
Every 1000 hours |
| Clean and adjust wheel bearings |
Every 1000 hours |
| Flush cooling system and add new coolant |
Every 1000 hours |
| Engine oil filter part number |
T19044, AR58956 |
| Engine fuel filter part number |
AT17387, AR50041 |
| Engine air cleaner part number |
AT20245 (Oil bath), AT20728 (Dry type) |
| Hydraulic/transmission oil filter part number |
AR28271, AR75603, AT34670 |
| Hydraulic/transmission filter seal part number |
R34733 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
