________________________________________________________________________________________
John Deere 1020 Tractor
The
John Deere 1020 is a 4x2 utility tractor from New Generation series. This model
was manufactured between 1965 to 1973. The John Deere 1020 tractor is powered by
4-stroke 3-cylinder water-cooled naturally aspirated diesel engine. A 152 cubic
inches (2.5 L) engine has a cylinder bore of 3.86" (98 mm), piston stroke of
3.86" (98 mm), and rated power of 40 hp (28.5 kW).
The John Deere 1020 was fitted with 3 types of transmission. 1st type:
8x4 Collar shift gear transmission. 2nd type: 16x8 two-speed power shift
transmission. 3rd type: Power shuttle transmission with 8 forward and 4
reverse gears.
Max. travel speed (forward and reverse): 16.6 mph (26.7 km/h) / 9.5 mph
(15.2 km/h). The closed center hydraulic system used a gear pump with a
rated capacity of 10.5 gpm (39.7 lpm). The standard lift capacity is
2010 lbs (912 kg ) at lift pin. The JD 1020 tractor is fitted with
5.50x16 front tires and 13.6x28 rear tires. The wheel base is 74 in
(1870 mm).
| Engine Model |
John Deere |
| Engine Type |
4-Stroke, 3-cylinder diesel |
| Number of Cylinders |
3 |
| Displacement, cu in (L) |
152.0 (2.5) |
| Engine Bore, in (mm) |
3.86 (98.0) |
| Engine Stroke, in (mm) |
3.86 (98.0) |
| Aspiration |
Natural |
| Rated Engine Power, hp (kW) |
40.0 (28.5) |
| Rated Engine Speed, rpm |
2500 |
| Compression |
16.7:1 |
| Firing Order |
1-2-3 |
| Valve Clearance (Intake), in (mm) |
0.014 (0.356) |
| Valve Clearance (Exhaust), in (mm) |
0.018 (0.457) |
| Air Cleaner |
Oil bath |
| Fuel Tank Capacity, gal (L) |
16.5 (62.5) |
| Oil Capacity, qts (L) |
6.0 (5.7) |
| Coolant Capacity, qts (L) |
11.0 (10.4) |
| Electrical System Rating, Volts |
12 |
| Electrical Ground |
Negative |
| Battery Rating, A/h |
55 |
| PTO Operational Type (Std) |
Continuous |
| PTO Operational Type (Opt) |
Live (2-Stage Clutch) / Independent |
| PTO Horsepower, hp (kW) |
38.8 (28.9) |
| PTO Speed, rpm |
540, 540/1000 |
| Transmission Type |
Collar shift |
| Gearbox Type |
8F/4R |
| Number of Forward Gears |
8 |
| Number of Reverse Gears |
4 |
| Clutch Type |
Dry Disc |
| Maximum Speed (Forward), mph (kph) |
16.6 (26.7) |
| Maximum Speed (Reverse), mph (kph) |
4.9 (7.9) |
| Transmission Type |
2-Speed powershift |
| Gearbox Type |
16F/8R |
| Number of Forward Gears |
16 |
| Number of Reverse Gears |
8 |
| Clutch Type |
Dry Disc |
| Maximum Speed (Forward), mph (kph) |
16.6 (26.7) |
| Maximum Speed (Reverse), mph (kph) |
9.5 (15.2) |
| Transmission Type |
Power shuttle |
| Gearbox Type |
8F/4R |
| Number of Forward Gears |
8 |
| Number of Reverse Gears |
4 |
| Maximum Speed (Forward), mph (kph) |
16.6 (26.7) |
| Maximum Speed (Reverse), mph (kph) |
4.9 (7.9) |
| Drive Wheels |
2WD 4x2 |
| Steering Configuration |
Front Steer |
| Steering System |
Power assist |
| Service Brake |
Differential hydraulic wet disc |
| Front Tire Size |
5.5-16 |
| Rear Tire Size |
13.6-28 |
| Front Tread, in (mm) |
49.6-73.2 (1250-1850) |
| Rear Tread, in (mm) |
49.6-79.4 (1250-2010) |
| Hydraulic System Type |
Closed Center |
| Implement Pump Flow, gpm (Lpm) |
10.5 (39.7) |
| Hydraulic Capacity, gal (L) |
10.0 (37.9) |
| Number of Standard Remote Valves |
1 |
| 3-Point Hitch Category |
1 |
| Standard Lift Capacity at lift pin, lb (kg) |
2010 (912) |
| Wheelbase, in (mm) |
74 (1870) |
| Length, in (mm) |
135 (3420) |
| Height, in (mm) |
78.74 (1990) |
| Front Tread, in (mm) |
56.5-63 (1430-1600) |
| Rear Tread, in (mm) |
64.5-68.5 (1630-1730) |
| Weight (Operating), lb (kg) |
4870 (2210) |
| Weight (Ballasted), lb (kg) |
5955 (2700) |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
