________________________________________________________________________________________
John Deere 2210 Tractor
The
John Deere 2210 sub-compact utility tractor was manufactured between 2003 and
2006. The John Deere 2210 powertrain system components: Yanmar 3TNE74 4-cycle
three-cylinder indirect injection liquid-cooled naturally aspirated diesel
engine and 2-range hydrostatic transmission with infinite forward and reverse
gears.
A 61.4 cubic inches (1.05L) engine has a cylinder bore of 2.91" (74 mm),
piston stroke of 3.07" (78 mm), and maximum power of 23 hp (17.1 kW).
The maximum forward speed - 4.3 mph (6.9 km/h) using low range or 8.5
mph (13.7 km/h) using high range, and maximum reverse speed - 3.2 mph
(5.2 km/h) using low range or 6.5 mph (10.4 km/h) using high. The open
center hydraulic system used a gear pump with a rated capacity of 3 gpm
(11.4 lpm). The hydraulic pressure is 137 bar (1990 psi).
The John Deere 2210 is equipped with a power steering system, wet disc
brakes, 18x8.50-10 front tires, and 26x12.00-12 rear tires. The
wheelbase is 57.1" (1450 mm). The tractor is compatible with 54" or 62"
mid-mount 3-blade mower decks with hydraulic lift system, 46"
front-mount single-stage snowblower with clearing height of 12" (305
mm), 54" front-mount blade with cutting depth of 3.5" (89 mm), and John
Deere 210 front-end loader with lift capacity to full height of 622 lbs
(282 kg).
| Engine Model |
Yanmar 3TNE74 |
| Engine Type |
4-cycle three-cylinder indirect injection liquid-cooled diesel |
| Number of Cylinders |
3 |
| Displacement, cu in (L) |
61.4 (1.05) |
| Engine Bore, in (mm) |
2.91 (74.0) |
| Engine Stroke, in (mm) |
3.07 (78.0) |
| Aspiration |
Naturally aspirated |
| Maximum Engine Power, hp (kW) |
23.0 (17.1) |
| Rated Engine Speed, rpm |
3000 |
| Low Idle Speed, rpm |
1400 |
| High Idle Speed, rpm |
3250 |
| Compression Ratio |
23.5:1 |
| Firing Order |
1-3-2 |
| Fuel System |
Indirect injection |
| Fuel Filter |
Replaceable element |
| Fuel Pump |
In-line with solenoid shutoff |
| Lubrication System |
Forced lubrication with trochoid pump |
| Oil Filter Type |
Single element |
| Air Cleaner |
Dry element |
| Fuel Tank Capacity, gal (L) |
5.0 (19.0) |
| Oil Capacity, qts (L) |
2.1 (2.0) |
| Coolant Capacity, qts (L) |
3.1 (2.9) |
| Electrical System Rating, Volts |
12 |
| Charging System |
Alternator |
| Alternator Rating, Amps |
20 |
| PTO Operational Type |
Independent |
| PTO Horsepower, hp (kW) |
17.7 (13.2) |
| PTO Clutch |
Hydraulic wet disc |
| Rear PTO Speed, rpm |
540 |
| Rear PTO / Engine Speed, rpm |
540/2900 |
| Mid PTO Speed, rpm |
2100 |
| Mid PTO / Engine Speed, rpm |
2100/2900 |
| Transmission Type |
Hydrostatic |
| Number of Forward Gears |
Infinite (2-range) |
| Number of Reverse Gears |
Infinite (2-range) |
| Oil Capacity, qts (L) |
13.6 (12.9) |
| Maximum Forward Speed (Low Range), mph (kph) |
4.3 (6.9) |
| Maximum Forward Speed (High Range), mph (kph) |
8.5 (13.7) |
| Maximum Reverse Speed (Low Range), mph (kph) |
3.2 (5.2) |
| Maximum Reverse Speed (High Range), mph (kph) |
6.5 (10.4) |
| Drive Wheels |
4WD 4x4 |
| Steering Configuration |
Front steer |
| Steering System |
Power Steering |
| Brakes Type |
Wet disc |
| Front Tire Size |
18x8.50-10 |
| Rear Tire Size |
26x12.00-12 |
| Front Tread, in (mm) |
31.1 (780) |
| Rear Tread, in (mm) |
35.3 (890) |
| Hydraulic System Type |
Open center |
| Implement Pump Type |
Gear |
| Implement Pump Flow, gpm (Lpm) |
3.0 (11.4) |
| Steering Pump Flow, gpm (Lpm) |
2.5 (9.5) |
| Hydraulic Pressure, Bar (psi) |
137 (1990) |
| Hydraulic Fluid Capacity, gal (L) |
3.4 (13.0) |
| Number of Standard Remote Valves |
2 |
| 3-Point Hitch Category |
1 |
| Lift Capacity at 24" (610mm) behind pin, lb (kg) |
700 (317) |
| Wheelbase, in (mm) |
57.1 (1450) |
| Overall Length (with Hitch), in (mm) |
104.3 (2650) |
| Height (Hood), in (mm) |
41.5 (1055) |
| Height (ROPS), in (mm) |
77.6 (1970) |
| Overall Width, in (mm) |
47.2 (1200) |
| Ground Clearance, in (mm) |
7.7 (190) |
| Turning Radius, in (mm) |
88.6 (2300) |
| Weight (ROPS), lb (kg) |
1400 (635) |
| Loader Model |
John Deere 210 |
| Maximum Lift Height at Pin, in (mm) |
68.5 (1730) |
| Clearance with Dumped Bucket, in (mm) |
50 (1270) |
| Reach at Maximum Height, in (mm) |
24.2 (615) |
| Maximum Dump Angle, deg |
47.2 |
| Maximum Rollback Angle, deg |
26.5 |
| Lift Capacity to Max Height at Pin, lbs (kg) |
622 (282) |
| Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
437 (198) |
| Breakout Force at Pivot Pin, lbs (kg) |
1577 (715) |
| Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
1072 (486) |
| Bucket Width, in (mm) |
49 (1240) |
| Snowblower Type |
Front-mount, single-stage |
| Clearing Width, in (mm) |
46 (1160) |
| Clearing Height, in (mm) |
12 (305) |
| Overall Width, in (mm) |
47.5 (1200) |
| Weight, lbs (kg) |
250 (113) |
| Blade Type |
Front-mount |
| Working Width, in (mm) |
54 (1370) |
| Lift Height, in (mm) |
11 (255) |
| Cutting Depth, in (mm) |
3.5 (89) |
| Weight, lbs (kg) |
50 (22) |
| Mower Deck Model |
John Deere 62C |
| Mower Deck Type |
Mid-mount |
| Number of Blades |
3 |
| Cutting Width, in (mm) |
62 (1570) |
| Deck Drive |
Shaft driven |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
