________________________________________________________________________________________
John Deere 2210 Maintenance
The
John Deere 2210 sub-compact utility tractor was manufactured between 2003 and
2006. The John Deere 2210 powertrain system components: Yanmar 3TNE74 4-cycle
three-cylinder indirect injection liquid-cooled naturally aspirated diesel
engine and 2-range hydrostatic transmission with infinite forward and reverse
gears.
A 61.4 cubic inches (1.05L) engine has a cylinder bore of 2.91" (74 mm),
piston stroke of 3.07" (78 mm), and maximum power of 23 hp (17.1 kW).
The maximum forward speed - 4.3 mph (6.9 km/h) using low range or 8.5
mph (13.7 km/h) using high range, and maximum reverse speed - 3.2 mph
(5.2 km/h) using low range or 6.5 mph (10.4 km/h) using high. The open
center hydraulic system used a gear pump with a rated capacity of 3 gpm
(11.4 lpm). The hydraulic pressure is 137 bar (1990 psi).
The John Deere 2210 is equipped with a power steering system, wet disc
brakes, 18x8.50-10 front tires, and 26x12.00-12 rear tires. The
wheelbase is 57.1" (1450 mm). The tractor is compatible with 54" or 62"
mid-mount 3-blade mower decks with hydraulic lift system, 46"
front-mount single-stage snowblower with clearing height of 12" (305
mm), 54" front-mount blade with cutting depth of 3.5" (89 mm), and John
Deere 210 front-end loader with lift capacity to full height of 622 lbs
(282 kg).
| Engine oil capacity, gal (L) |
0.55 (2.1) |
| Engine coolant capacity, gal (L) |
0.80 (3.0) |
| Hydraulic system capacity, gal (L) |
3.4 (13.0) |
| Front axle oil capacity, gal (L) |
0.65 (2.5) |
| Recommended Oil and Fluid |
| Engine oil type |
Plus-50, Torq-Gard, SAE 15W-40, 10W-30, 5W-30. API Service Category SG or higher |
| Engine coolant type |
Cool-Gard Premix or Cool-Gard Prediluted |
| Hydraulic/transmission fluid type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
| Front axle oil type |
GL-5 Gear Lubricant, SAE 80W-90 |
| Check battery and clean terminals |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Check fluid level in hydraulic system |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Change engine oil |
Every 200 hours |
| Replace engine oil filter |
Every 200 hours |
| Change hydraulic/transmission fluid |
Every 200 hours |
| Replace hydraulic/transmission filter |
Every 200 hours |
| Check and service air filter elements |
Every 200 hours |
| Inspect and adjust alternator belt |
Every 200 hours |
| Replace engine fuel filter |
Every 500 hours |
| Replace primary engine air filter |
Every 500 hours |
| Replace secondary engine air filter |
Every 500 hours |
| Check and adjust engine idling |
Every 500 hours |
| Change front axle oil |
Every 500 hours |
| Adjust parking and service brakes |
Every 500 hours |
| Check and adjust valve clearance |
Every 500 hours |
| Flush cooling system and add new coolant |
Every 2000 hours |
| Engine oil filter part number |
M806418 |
| Engine fuel filter part number |
CH15553 |
| Primary engine air filter part number |
M113621, M807332 |
| Secondary engine air filter part number |
M123378, M807331 |
| Hydraulic/transmission oil filter part number |
LVU800812, LVA12812 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
