________________________________________________________________________________________
John Deere 2320 Tractor
The
John Deere 2320 compact utility tractor was manufactured from 2006 to 2012. The
components of John Deere 2320 driveline system: Yanmar 3TNV76 4-cycle
three-cylinder indirect injection liquid-cooled diesel engine and two-range
hydrostatic transmission with infinite forward and reverse gears.
A 68.1 cubic inches (1.1L) engine has a cylinder bore of 2.99" (76 mm),
piston stroke of 3.23" (82 mm), and maximum power of 24.1 hp (18 kW).
Max forward speed - 11.3 mph (18.1 kph), max reverse speed - 11 mph
(17.6 kph).
The open center hydraulic system used a dual gear pump with rated
capacity of 3.4 gpm (13 lpm). The main relief pressure is 167 bar (2420
psi). The John Deere 2320 is equipped with a hydrostatic power steering,
wet disc brakes, 23x8.50-12 front tires, and 31x12.00-16.5 rear tires.
The wheelbase is 63" (1600 mm). The tractor is compatible with a
John
Deere 200CX front-end loader with lift capacity to full height of 902
lbs (409 kg) and breakout force of 2239 lbs (1015 kg).
| Engine Model |
Yanmar 3TNV76 |
| Engine Type |
4-cycle three-cylinder indirect injection liquid-cooled diesel |
| Number of Cylinders |
3 |
| Displacement, cu in (L) |
68.1 (1.1) |
| Engine Bore, in (mm) |
2.99 (76.0) |
| Engine Stroke, in (mm) |
3.23 (82.0) |
| Aspiration |
Naturally aspirated |
| Maximum Engine Power, hp (kW) |
24.1 (18.0) |
| Rated Engine Speed, rpm |
3000 |
| Low Idle Speed, rpm |
1170 |
| High Idle Speed, rpm |
3170 |
| Compression Ratio |
23.4:1 |
| Firing Order |
1-3-2 |
| Fuel System |
Indirect injection |
| Fuel Filter |
Replaceable element |
| Fuel Injection Pump |
Mechanical, in-line type |
| Lubrication System |
Forced lubrication with trochoid pump |
| Oil Filter Type |
Single element |
| Air Cleaner |
Dual dry element |
| Fuel Tank Capacity, gal (L) |
6.1 (23.0) |
| Oil Capacity, qts (L) |
3.4 (3.2) |
| Coolant Capacity, qts (L) |
3.4 (3.2) |
| Electrical System Rating, Volts |
12 |
| Charging System |
Alternator |
| Alternator Rating, Amps |
20 |
| PTO Operational Type |
Independent |
| PTO Horsepower, hp (kW) |
18.0 (13.4) |
| Rear PTO Speed, rpm |
540 |
| Rear PTO / Engine Speed, rpm |
540/3000 |
| Mid PTO Speed, rpm |
2100 |
| Mid PTO / Engine Speed, rpm |
2100/3000 |
| Transmission Type |
Hydrostatic |
| Number of Forward Gears |
Infinite (2-range) |
| Number of Reverse Gears |
Infinite (2-range) |
| Oil Capacity, qts (L) |
13.9 (13.1) |
| Maximum Forward Speed, mph (kph) |
11.3 (18.1) |
| Maximum Reverse Speed, mph (kph) |
11.0 (17.6) |
| Drive Wheels |
4WD 4x4 |
| Steering Configuration |
Front steer |
| Steering System |
Power Steering |
| Brakes Type |
Wet disc |
| Front Tire Size |
23x8.50-12 |
| Rear Tire Size |
31x12.00-16.5 |
| Hydraulic System Type |
Open center |
| Implement Pump Type |
Dual gear |
| Implement Pump Flow, gpm (Lpm) |
3.4 (13.0) |
| Steering Pump Flow, gpm (Lpm) |
2.2 (8.4) |
| Hydraulic Pressure, Bar (psi) |
167 (2420) |
| Hydraulic Fluid Capacity, gal (L) |
2.6 (9.9) |
| Number of Standard Remote Valves |
2 |
| 3-Point Hitch Category |
1 |
| Draft Sensing or Lift Control |
Position control |
| Lift Capacity at 24" (610mm) behind pin, lb (kg) |
520 (1150) |
| Lift Capacity at pin, lb (kg) |
1435 (650) |
| Wheelbase, in (mm) |
63 (1600) |
| Overall Length, in (mm) |
109.2 (2770) |
| Height (Hood), in (mm) |
53.3 (1350) |
| Height (ROPS), in (mm) |
89 (2260) |
| Overall Width, in (mm) |
51 (1290) |
| Turning Radius (w/Brakes), in (mm) |
78.7 (2000) |
| Turning Radius (w/o Brakes), in (mm) |
88.6 (2300) |
| Weight, lb (kg) |
1660 (753) |
| Loader Model |
John Deere 200CX |
| Maximum Lift Height at Pin, in (mm) |
78.5 (1990) |
| Clearance with Dumped Bucket, in (mm) |
58.5 (1480) |
| Reach at Maximum Height, in (mm) |
29.5 (740) |
| Maximum Dump Angle, deg |
38 |
| Maximum Rollback Angle, deg |
25 |
| Lift Capacity to Max Height at Pin, lbs (kg) |
902 (410) |
| Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
630 (285) |
| Breakout Force at Pivot Pin, lbs (kg) |
2240 (1015) |
| Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
1515 (687) |
| Bucket Width, in (mm) |
53 (1345) |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
