________________________________________________________________________________________
John Deere 2320 Maintenance
The
John Deere 2320 compact utility tractor was manufactured from 2006 to 2012. The
components of John Deere 2320 driveline system: Yanmar 3TNV76 4-cycle
three-cylinder indirect injection liquid-cooled diesel engine and two-range
hydrostatic transmission with infinite forward and reverse gears.
A 68.1 cubic inches (1.1L) engine has a cylinder bore of 2.99" (76 mm),
piston stroke of 3.23" (82 mm), and maximum power of 24.1 hp (18 kW).
Max forward speed - 11.3 mph (18.1 kph), max reverse speed - 11 mph
(17.6 kph).
The open center hydraulic system used a dual gear pump with rated
capacity of 3.4 gpm (13 lpm). The main relief pressure is 167 bar (2420
psi). The John Deere 2320 is equipped with a hydrostatic power steering,
wet disc brakes, 23x8.50-12 front tires, and 31x12.00-16.5 rear tires.
The wheelbase is 63" (1600 mm). The tractor is compatible with a
John
Deere 200CX front-end loader with lift capacity to full height of 902
lbs (409 kg) and breakout force of 2239 lbs (1015 kg).
| Engine oil capacity, gal (L) |
0.85 (3.2) |
| Engine coolant capacity, gal (L) |
0.85 (3.2) |
| Hydraulic system capacity, gal (L) |
3.5 (13.1) |
| Front axle oil capacity, gal (L) |
0.90 (3.4) |
| Recommended Oil and Fluid |
| Engine oil type |
Plus-50, Torq-Gard, SAE 10W-40, 15W-40, 10W-30. API Service Category CH or higher |
| Engine coolant type |
Cool-Gard Premix or Cool-Gard PG Premix |
| Hydraulic/transmission fluid type |
Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
| Front axle oil type |
GL-5 Gear Lubricant, SAE 80W-90 |
| Check battery and clean terminals |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Check fluid level in hydraulic system |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Change engine oil |
Every 200 hours |
| Replace engine oil filter |
Every 200 hours |
| Change hydraulic/transmission fluid |
Every 200 hours |
| Replace hydraulic/transmission filter |
Every 200 hours |
| Check and service air filter elements |
Every 200 hours |
| Inspect and adjust alternator belt |
Every 200 hours |
| Change engine fuel filter |
Every 400 hours |
| Replace primary engine air filter |
Every 600 hours |
| Replace secondary engine air filter |
Every 600 hours |
| Check and adjust engine idling |
Every 600 hours |
| Change front axle oil |
Every 600 hours |
| Adjust parking and service brakes |
Every 600 hours |
| Check and adjust valve clearance |
Every 1200 hours |
| Flush cooling system and add new coolant |
Every 2000 hours |
| Engine oil filter part number |
M806418 |
| Engine fuel filter part number |
M801101 |
| Primary engine air filter part number |
M131802, RG60690 |
| Secondary engine air filter part number |
M131803, RG25644 |
| Hydraulic/transmission oil filter part number |
AL221066, LVA802810 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
