Home / Farm Tractors / John Deere Tractors / JD 3025E

John Deere 3025E Tractor

The John Deere 3025E is a 4WD compact utility tractor from 3E series. This model was manufactured between 2017 and 2021. The John Deere 3025E powerline components: a 100.2 cu.in (1.6L) Yanmar 3TNV88F 4-cycle three-cylinder direct injection naturally aspirated liquid-cooled diesel engine with maximum power of 24.7 hp (18.4 kW), and 2-range hydrostatic transmission with infinite forward and reverse gears.

The engine has a high pressure common rail fuel system, forced lubrication with trochoid pump, and air cleaner with dual dry element. The maximum travel speed (forward and reverse): 14.1 mph (22.7 km/h) / 13 mph (21 km/h). The open center hydraulic system includes a dual gear pump with fluid flow rate of 5.3 gpm (20.2 lpm). The hydraulic pressure is 172 bar (2500 psi).

The John Deere 3025E is equipped with a power steering system, wet disc brakes, 7.00x14 (AG) or 27x8.50-15 (Turf) front tires, and 11.2x24 (AG) or 41x14.00-20 (Turf) rear tires. The wheelbase is 60" (1520 mm). The tractor is compatible with a John Deere 300E front-end loader with lift capacity to full height of 1186 lbs (537 kg) and breakout force of 1704 lbs (772 kg).

Engine Model Yanmar 3TNV88F
Engine Type 4-cycle three-cylinder direct injection liquid-cooled diesel
Number of Cylinders 3
Displacement, cu in (L) 100.2 (1.642)
Engine Bore, in (mm) 3.47 (88.0)
Engine Stroke, in (mm) 3.54 (90.0)
Aspiration Naturally aspirated
Maximum Engine Power, hp (kW) 24.7 (18.4)
Rated Engine Speed, rpm 2400
Low Idle Speed, rpm 1000
High Idle Speed, rpm 2550
Compression Ratio 19.1:1
Firing Order 1-3-2
Fuel System High pressure common rail
Fuel System Control Electronic
Lubrication System Forced lubrication with trochoid pump
Oil Filter Type Single element
Air Cleaner Dual dry element
Emission Level Tier 4
Exhaust Gas Recirculation EGR standard
Fuel Tank Capacity, gal (L) 6.2 (23.5)
Oil Capacity, qts (L) 4.6 (4.3)
Coolant Capacity, qts (L) 5.2 (4.9)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 55

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 17.4 (13.0)
PTO Clutch Wet disc
PTO Speed, rpm 540
PTO / Engine Speed, rpm 540/2500

Transmission Type Hydrostatic
Number of Forward Gears Infinite (2-range)
Number of Reverse Gears Infinite (2-range)
Oil Capacity, qts (L) 22.1 (20.8)
Maximum Forward Speed (Low Range), mph (kph) 6.0 (9.7)
Maximum Forward Speed (High Range), mph (kph) 14.1 (22.7)
Maximum Reverse Speed (Low Range), mph (kph) 6.0 (9.7)
Maximum Reverse Speed (High Range), mph (kph) 13.0 (21.0)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Power Steering
Brakes Type Wet disc
Front Tire Size (AG) 7.00x14
Rear Tire Size (AG) 11.2x24
Front Tire Size (Turf) 27x8.50-15
Rear Tire Size (Turf) 41x14.00-20
Front Tire Size (Industrial) 25x8.50-14
Rear Tire Size (Industrial) 15-19.5

Hydraulic System
Hydraulic System Type Open center
Implement Pump Type Dual gear
Implement Pump Flow, gpm (Lpm) 5.3 (20.2)
Steering Pump Flow, gpm (Lpm) 4.0 (15.0)
Hydraulic Pressure, Bar (psi) 172 (2500)
Hydraulic Fluid Capacity, gal (L) 5.5 (20.8)
Number of Standard Remote Valves 0/2
3-Point Hitch Category 1
Draft Sensing or Lift Control Position control
Lift Capacity at 24" (610mm) behind pin, lb (kg) 1355 (615)

Dimensions and Weight
Wheelbase, in (mm) 60 (1520)
Overall Length, in (mm) 111 (2820)
Height (ROPS), in (mm) 82.3 (2090)
Overall Width, in (mm) 58 (1470)
Ground Clearance, in (mm) 14.3 (365)
Weight, lb (kg) 2220 (1008)

Front End Loader
Loader Model John Deere 300E
Maximum Lift Height at Pin, in (mm) 84 (2130)
Clearance with Dumped Bucket, in (mm) 63 (1600)
Reach at Maximum Height, in (mm) 24 (600)
Maximum Dump Angle, deg 44
Maximum Rollback Angle, deg 31
Lift Capacity to Max Height at Pin, lbs (kg) 1186 (537)
Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) 845 (383)
Breakout Force at Pivot Pin, lbs (kg) 1704 (772)
Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) 1204 (546)
Bucket Width, in (mm) 61 (1540)




Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294