________________________________________________________________________________________
John Deere 3025E Maintenance
The
John Deere 3025E is a 4WD compact utility tractor from 3E series. This model was
manufactured between 2017 and 2021. The John Deere 3025E powerline components: a
100.2 cu.in (1.6L) Yanmar 3TNV88F 4-cycle three-cylinder direct injection
naturally aspirated liquid-cooled diesel engine with maximum power of 24.7 hp
(18.4 kW), and 2-range hydrostatic transmission with infinite forward and
reverse gears.
The engine has a high pressure common rail fuel system, forced
lubrication with trochoid pump, and air cleaner with dual dry element.
The maximum travel speed (forward and reverse): 14.1 mph (22.7 km/h) /
13 mph (21 km/h). The open center hydraulic system includes a dual gear
pump with fluid flow rate of 5.3 gpm (20.2 lpm). The hydraulic pressure
is 172 bar (2500 psi).
The John Deere 3025E is equipped with a power steering system, wet disc
brakes, 7.00x14 (AG) or 27x8.50-15 (Turf) front tires, and 11.2x24 (AG)
or 41x14.00-20 (Turf) rear tires. The wheelbase is 60" (1520 mm). The
tractor is compatible with a John Deere 300E front-end loader with lift
capacity to full height of 1186 lbs (537 kg) and breakout force of 1704
lbs (772 kg).
| Engine oil capacity, gal (L) |
1.1 (4.3) |
| Engine coolant capacity, gal (L) |
1.3 (4.9) |
| Hydraulic system capacity, gal (L) |
5.5 (21.0) |
| Front axle oil capacity, gal (L) |
1.0 (3.8) |
| Recommended Oil and Fluid |
| Engine oil type |
Plus-50, Torq-Gard Supreme, SAE 10W-40, 15W-40, 10W-30. API Service category CI-4, CJ-4 |
| Engine coolant type |
Cool-Gard Premix or Cool-Gard PG Premix |
| Hydraulic/transmission fluid type |
JD Low Viscosity Hy-Gard, JDM J20D |
| Front axle oil type |
JD Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
| Check battery and clean terminals |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Check hydraulic fluid level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Change engine oil |
Every 200 hours |
| Replace engine oil filter |
Every 200 hours |
| Check and service air filter elements |
Every 200 hours |
| Inspect and adjust alternator/fan belt |
Every 200 hours |
| Change hydraulic/transmission fluid |
Every 400 hours |
| Replace hydraulic/transmission filter |
Every 400 hours |
| Change engine fuel filter |
Every 400 hours |
| Replace primary engine air filter |
Every 600 hours |
| Replace secondary engine air filter |
Every 600 hours |
| Check and adjust engine idling |
Every 600 hours |
| Change front axle oil |
Every 600 hours |
| Adjust parking and service brakes |
Every 600 hours |
| Check and adjust valve clearance |
Every 1000 hours |
| Flush cooling system and add new coolant |
Every 2000 hours |
| Engine oil filter part number |
M806419 |
| Engine fuel filter part number |
MIU800645 |
| Fuel/water seperator part number |
M811032 |
| Primary engine air filter part number |
M131802 |
| Secondary engine air filter part number |
M131803 |
| Hydraulic/transmission oil filter part number |
LVA16054, LVA14703 |
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
