Home / Farm Tractors / John Deere Tractors / JD 3032E

John Deere 3032E Maintenance

The John Deere 3032E is a 4-wheel drive compact utility tractor. This model was manufactured from 2008 to 2021. The components of John Deere 3032E driveline system: Yanmar 3TNV88 four-cycle three-cylinder direct injection liquid-cooled diesel engine and two-range hydrostatic transmission with infinite forward and reverse gears.

A 100.2 cubic inches (1.6L) engine has a cylinder bore of 3.47" (88 mm), piston stroke of 3.54" (90 mm), and maximum power of 30.7 hp (22.9 kW). Max travel speed (forward/reverse): 14.1 mph (22.7 km/h) / 13 mph (21 km/h). The open center hydraulic system includes a gear pump with a rated capacity of 5.3 gal/min (20.2 l/min). The main relief pressure is 172 bar (2500 psi).

The John Deere 3032E is equipped with a hydrostatic power steering, wet disc brakes, 7.00x14 (AG) or 25x8.50-14 (Industrial) front tires, and 11.2x24 (AG) or 15-19.5 (Industrial) rear tires. The wheelbase is 62.8" (1590 mm). The tractor is compatible with a John Deere D160 front-end loader with lift capacity to full height of 1186 lbs (537 kg) and breakout force of 1704 lbs (772 kg).

Refill Capacities
Engine oil capacity, gal (L) 1.1 (4.3)
Engine coolant capacity, gal (L) 1.3 (4.9)
Hydraulic system capacity, gal (L) 5.5 (21.0)
Front axle oil capacity, gal (L) 1.0 (3.8)

Recommended Oil and Fluid
Engine oil type Plus-50, Torq-Gard Supreme, SAE 10W-40, 15W-40, 10W-30. API Service category CJ-4
Engine coolant type Cool-Gard Premix or Cool-Gard PG Premix
Hydraulic/transmission fluid type JD Low Viscosity Hy-Gard, JDM J20D
Front axle oil type JD Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D

Service Intervals
Check battery and clean terminals Every 50 hours
Check front axle oil level Every 50 hours
Check hydraulic fluid level Every 50 hours
Lubricate axle hub bearings Every 50 hours
Change engine oil Every 200 hours
Replace engine oil filter Every 200 hours
Check and service air filter elements Every 200 hours
Inspect and adjust alternator/fan belt Every 200 hours
Change hydraulic/transmission fluid Every 400 hours
Replace hydraulic/transmission filter Every 400 hours
Change engine fuel filter Every 400 hours
Replace primary engine air filter Every 600 hours
Replace secondary engine air filter Every 600 hours
Check and adjust engine idling Every 600 hours
Change front axle oil Every 600 hours
Adjust parking and service brakes Every 600 hours
Check and adjust valve clearance Every 1000 hours
Flush cooling system and add new coolant Every 2000 hours

Replacement Parts
Engine oil filter part number M806419
Engine fuel filter part number MIU800645, MIU803127
Fuel/water seperator part number M811032, MIU802421
Diesel particulate filter part number MIA884117
Primary engine air filter part number M131802
Secondary engine air filter part number M131803
Hydraulic/transmission oil filter part number LVA16054, LVA14703




Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294