________________________________________________________________________________________
John Deere 3130 Maintenance
The
John Deere 3130 is a 2WD or 4WD farm tractor. This model was manufactured from
1973 to 1979. The JD 3130 tractor is powered by John Deere 6.329D 4-cycle
six-cylinder liquid cooled diesel engine with maximum output power of 96 hp
(71.1 kilowatt) and 310.5 Nm (229 lb-ft) of peak torque at 1210 rpm.
The John Deere 3130 is fitted with 2 transmission options: Hi-Lo
transmission with 12 forward and 6 reverse gears, and 6x3 sliding gear
transmission. Max. forward speed - 15.4 mph (27.4 km/h), maximum reverse
speed - 5.2 mph (8.3 km/h).
The closed center hydraulic system used a piston pump with fluid flow
rate of 23 gpm (87 lpm). The rear lift capacity is 7450 lbs (3380 kg)
at lift pin. The 4x4 models are equipped with 12.4x24 front tyres and
16.9x38 rear tyres. The 7.50x18 front tyres and 18.4x34 rear tyres fit
4x2 tractors. The wheelbase is 96.9" (2455 mm). The tractor is
compatible with JD 148 front end loader. The loader has 5ft, 6ft, 7ft
and 8ft buckets and lift capacity to full height of 3100 lbs (1406 kg).
Engine oil capacity, gal (L) |
3.0 (11.4) |
Engine coolant capacity, gal (L) |
5.0 (19.0) |
Hydraulic/transmission system capacity, gal (L) |
13.0 (49.0) |
Belt pulley oil capacity, qts (L) |
1.2 (1.1) |
Recommended Oil and Fluid |
Engine oil type |
Torq-Gard Supreme, SAE 10W-30, 15W-30, 15W-40. API Service category CC, CD |
Engine coolant type |
Cool-Gard Premix Coolant |
Hydraulic/Transmission fluid type |
Hy-Gard, JDM J20A, 303 Special-Purpose Oil, JDM 14B |
Belt pulley oil type |
Hy-Gard, 303 Special-Purpose Oil, or SAE 80 |
Check hydraulic/transmission fluid level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Clean battery and check electrolyte level |
Every 50 hours |
Change engine oil |
Every 100 hours |
Replace engine oil filter |
Every 200 hours |
Inspect and adjust fan belt |
Every 200 hours |
Check belt pulley oil level |
Every 200 hours |
Clean engine air filter elements |
Every 200 hours |
Change engine fuel filter |
Every 500 hours |
Check injection timing |
Every 500 hours |
Replace hydraulic/transmission oil filter |
Every 500 hours |
Change belt pulley oil |
Every 500 hours |
Check and adjust engine idling |
Every 500 hours |
Check and adjust valve clearance |
Every 500 hours |
Change hydraulic/transmission fluid |
Every 1000 hours |
Clean and adjust wheel bearings |
Every 1000 hours |
Clean hydraulic pump valve filter |
Every 1000 hours |
Replace engine air filter elements |
Every 1000 hours |
Replace cab air filter elements |
Every 1000 hours |
Flush cooling system and add new coolant |
Every 1000 hours |
Engine oil filter part number |
T19044, AR58956 |
Engine fuel filter part number |
AR50041 |
Primary engine air filter part number |
AL27158 |
Secondary engine air filter part number |
AL27160 |
Cab air filter part number |
L31410, AL32932 |
Hydraulic/transmission oil filter part number |
AR75603, AL25554, AL28072 |
Hydraulic filter element part number |
R68381 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |