Home / Farm Tractors / John Deere Tractors / JD 4010

John Deere 4010 Maintenance

The John Deere 4010 is a New Generation series row crop tractor. This model was manufactured from 1960 to 1963. The JD 4010 tractor is equipped with a 380 cubic inches (6.2 L) John Deere 4 cycle 6-cylinder water-cooled naturally aspirated diesel engine, or 302 cubic inches (4.9 L) John Deere 4 cycle 6-cylinder gasoline engine.

The diesel engine has a cylinder bore of 4.15" (105 mm), piston stroke of 4.78" (121 mm), and rated power of 88 hp (65.2 kW). The gasoline engine has a cylinder bore of 4.03" (102 mm), piston stroke of 4.03" (102 mm), and rated power of 87 hp (64.4 kW).

The Syncro Range transmission includes a dry clutch and partially synchronized gearbox with 8 forward and 3 reverse gears. Max. forward speed - 14.3 mph (22.9 km/h), maximum reverse speed - 8.5 mph (13.7 km/h). The closed center hydraulic system used a pump with fluid flow rate of 13 gal/min (49.2 l/min). The hydraulic pressure is 2320 psi (160 bar). The John Deere 4010 was equipped with a power assist steering, differential hydraulic wet disc brakes, 6.00x16 front tires, and 13.6x38 rear tires. The wheelbase is 99.3 inches (2520 mm).

Refill Capacities
Engine oil capacity, gal (L) 2.25 (8.5)
Engine coolant capacity, gal (L) 5.75 (21.8) Diesel or 6.0 (22.7) Gasoline
Hydraulic/Transmission system capacity, gal (L) 11.0 (41.6)
Belt pulley oil capacity, qts (L) 1.3 (1.2)

Recommended Oil and Fluid
Engine oil type Torq-Gard, SAE 10W-30, 20W-40. API Service category DS, MS
Engine coolant type Cool-Gard Premix Coolant
Hydraulic/Transmission fluid type JD 303 Special-Purpose Oil
Belt pulley oil type JD 303 Special-Purpose Oil

Service Intervals
Check hydraulic/transmission fluid level Every 50 hours
Lubricate axle hub bearings Every 50 hours
Change engine oil Every 200 hours
Replace engine oil filter Every 200 hours
Inspect and adjust generator belt Every 200 hours
Check belt pulley oil level Every 200 hours
Clean air cleaner oil cap Every 200 hours
Clean battery and check electrolyte level Every 200 hours
Change engine fuel filter (diesel) Every 600 hours
Clean carburetor strainer screen (gasoline) Every 600 hours
Check injection timing (diesel) Every 600 hours
Clean or replace spark plug (gasoline) Every 600 hours
Replace hydraulic oil filter Every 600 hours
Change belt pulley oil Every 600 hours
Check and adjust engine idling Every 600 hours
Check and adjust valve clearance Every 600 hours
Change hydraulic/transmission fluid Every 1200 hours
Clean and adjust wheel bearings Every 1200 hours
Clean hydraulic pump valve filter Every 1200 hours
Flush cooling system and add new coolant Every 1500 hours

Replacement Parts
Engine oil filter part number AR26350
Engine fuel filter part number AR44077
Engine air cleaner part number AR26865 (diesel), AR32423/AR26864 (gasoline)
Hydraulic/transmission oil filter part number AR75603
Hydraulic filter element part number R27173




Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294