________________________________________________________________________________________
Kubota B8200HST Maintenance
The
Kubota B8200HST compact utility tractor was manufactured between 1983 and 1990.
This model was designed in two versions: B8200HST-E (2WD) and B8200HST-D (4WD).
The Kubota B8200HST driveline includes a 56.6 cu.in (0.93L) Kubota D950-A-DT
vertical 3-cylinder indirect injection naturally aspirated liquid-cooled diesel
engine and 3-range hydrostatic transmission with infinite forward and reverse
gears.
The engine has a cylinder bore of 2.97" (75 mm), piston stroke of 2.76"
(70 mm), maximum power of 21.5 hp (15.9 kW), and 55.6 Nm (41.2 lb-ft) of
peak torque at 1800 rpm. The maximum forward speed - 11.7 mph (18.9
km/h), max reverse speed - 9.4 mph (15.1 km/h). The open center
hydraulic system used a gear pump with a flow of 6.5 gal/min (24.6
l/min). The main relief pressure is 118 bar (1715 psi).
The 2-wheel drive models are equipped with 4.00x12 front tyres and
8.30x24 rear tyres. The 6.50x10 (AG) or 24x8.50-12 (Turf) front tyres
and 12.4x16 (AG) or 13.6x16 (Turf) rear tyres fit 4-wheel drive
tractors. The wheel base is 60.4" (1535 mm). The Kubota B8200HST is
compatible with the following attachments: a 60" mid-mount 3-blade mower
deck with cutting height of 1.5-4.0" (38-102 mm), 51" front-mount
two-stage snowblower with hydraulic lift system,
Kubota BF300 front-end
loader with lift capacity to full height of 705 lbs (320 kg), and Kubota
BK4520 backhoe with maximum digging depth of 78" (1980 mm).
Engine oil capacity, gal (L) |
0.8 (3.1) |
Engine coolant capacity, gal (L) |
1.05 (4.0) |
Hydraulic/transmission fluid capacity, gal (L) |
4.75 (18.0) |
Front axle oil capacity, qts (L) |
2.7 (2.5) |
Recommended Oil and Fluid |
Engine oil type |
SAE 20, SAE 30, SAE 10W, 10W-30. API Service category CC, CD |
Engine coolant type |
Kubota Antifreeze/Coolant |
Hydraulic/transmission fluid type |
Kubota UDT |
Front axle oil type |
Gear lube SAE 80, SAE 80W-90 |
Check hydraulic/transmission fluid level |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Change engine oil |
Every 75 hours |
Clean engine air filter element |
Every 100 hours |
Clean engine fuel filter |
Every 100 hours |
Inspect and adjust fan belt |
Every 100 hours |
Check battery and clean terminals |
Every 100 hours |
Replace engine oil filter |
Every 150 hours |
Replace hydrostatic transmission oil filter |
Every 200 hours |
Change hydraulic/transmission fluid |
Every 300 hours |
Change front axle oil |
Every 300 hours |
Check and adjust engine idling |
Every 300 hours |
Adjust parking and service brakes |
Every 300 hours |
Change engine fuel filter |
Every 400 hours |
Clean radiator fins |
Every 500 hours |
Replace engine air filter element |
Every 600 hours |
Check and adjust valve clearance |
Every 800 hours |
Flush cooling system and add new coolant |
Every 1000 hours |
Engine oil filter part number |
HH150-32094 |
Engine fuel filter part number |
1T021-43560 (Element) |
Engine air filter part number |
70000-11221 |
Hydraulic oil filter part number |
67800-37120 |
Hydrostatic transmission filter part number |
32701-37950 |
Drive belt part number |
70000-73783 |
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |