________________________________________________________________________________________
Kubota L3010 Maintenance
The
Kubota L3010 compact utility tractor was manufactured between 1998 and 2002.
This model was designed in 4 versions: L3010F (2WD Gear Transmission), L3010DT
(4WD Gear Transmission), L3010GST (4WD Glide Shift Transmission), and L3010HST
(4WD Hydrostatic Transmission).
The Kubota L3010 is powered by 91.5 cu.in (1.5L) Kubota D1503-L-A
4-cycle vertical 3-cylinder indirect injection water-cooled diesel
engine with a rated power of 30.4 hp (22.6 kW). The Kubota L3010 is
fitted with 3 types of transmission. Type 1: 8x8 synchronized shuttle
transmission. Type 2: 8x8 glide shift transmission. Type 3: three-range
hydrostatic transmission with infinite forward and reverse gears. Max
forward speed - 16.4 mph (26.5 km/h), max reverse speed - 14.1 mph (22.7
km/h). The open center hydraulic system includes a gear pump with fluid
flow rate of 7 gpm (24.5 lpm). The hydraulic pressure is 172 bar (2500
psi).
The 2-wheel drive models are equipped with 5.00x15 front tires and
12.4x24 rear tires. The 7.2x16 front tires and 12.4x24 rear tires are
used for tractors with 4-wheel drive. The wheel base is 65.9" (1675 mm)
for models with 2WD (4x2) and 65.7" (1670 mm) for models with 4WD (4x4).
The Kubota L3010 is compatible with a 72" mid-mount 3-blade mower deck
with cutting height of 1.5-3.5" (38-90 mm), 72" front-mount snowblower
with hydraulic lift system, 60" front-mount blade,
Kubota LA481
front-end loader with lift capacity to full height of 1058 lbs (480 kg),
and Kubota BL4690 backhoe with maximum digging depth of 90.2" (2290 mm).
Engine oil capacity, gal (L) |
1.5 (5.5) |
Engine coolant capacity, gal (L) |
1.85 (7.0) |
Hydraulic/transmission fluid capacity, gal (L) |
10.3 (39.0) |
Front axle oil capacity, gal (L) |
1.5 (5.5) |
Recommended Oil and Fluid |
Engine oil type |
SAE 20, SAE 30, SAE 10W, 10W-30, 10W-40. API Service category CC, CD |
Engine coolant type |
Kubota Antifreeze/Coolant |
Hydraulic/transmission fluid type |
Kubota UDT or Kubota Super UDT |
Front axle oil type |
Kubota UDT, SAE 80, SAE 80W-90 Gear Oil |
Check hydraulic/transmission fluid level |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Clean engine air filter elements |
Every 100 hours |
Service engine fuel filter element |
Every 100 hours |
Check battery and clean terminals |
Every 100 hours |
Inspect and adjust fan belt |
Every 100 hours |
Adjust parking and service brakes |
Every 100 hours |
Change engine oil |
Every 100 hours |
Replace engine oil filter |
Every 200 hours |
Replace hydraulic oil filter |
Every 200 hours |
Replace hydrostatic transmission oil filter |
Every 200 hours |
Check power steering oil line |
Every 200 hours |
Check and adjust engine idling |
Every 200 hours |
Change hydraulic/transmission fluid |
Every 400 hours |
Change front axle oil |
Every 400 hours |
Replace engine fuel filter |
Every 400 hours |
Replace primary engine air filter element |
Every 600 hours |
Replace secondary engine air filter element |
Every 600 hours |
Check and adjust valve clearance |
Every 800 hours |
Flush cooling system and add new coolant |
Every 1000 hours |
Engine oil filter part number |
HH164-32430 |
Engine fuel filter part number |
15521-43160 (Element) |
Primary engine air filter part number |
TA040-93230 |
Secondary engine air filter part number |
TA040-93220 (Element) |
Hydraulic oil filter part number |
HHTA0-37710 |
HST transmission oil filter part number |
HHTA0-59900 |
Drive belt part number |
15469-97010 |
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |