Home / Farm Tractors / Kubota Tractors / Kubota L4610

Kubota L4610 Tractor

The Kubota L4610 compact utility tractor was manufactured from 1999 to 2002. This model was designed in four versions: L4610GST (Glide-shift transmission, ROPS), L4610HST (Hydrostatic transmission, ROPS) and L4610HSTC (Hydrostatic transmission, Cab).

The Kubota L4610 tractor is powered by 134.1 cu.in (2.2L) Kubota V2203-EHA 4-cycle vertical 4-cylinder indirect injection water-cooled diesel engine with a rated power of 46 hp (34.3 kW). The Kubota L4610 is fitted with 2 transmission options: Glide Shift transmission with 8 forward and 8 reverse gears, or 3-range hydrostatic transmission with infinite forward and reverse gears. The maximum forward speed - 17.3 mph (27.8 km/h), maximum reverse speed - 15.4 mph (24.7 km/h).

The open center hydraulic system includes a gear pump with a flow of 9.6 gal/min (36.4 l/min). The hydraulic capacity is 10.3 gal (39 L). The tractor is equipped with a hydrostatic power steering, wet disc brakes, 8.3x16 front tires, and 14.9x24 rear tires. The wheel base is 71.5" (1815 mm). The tractor is compatible with the following attachments: Kubota LA852 loader with lift capacity to max height of 2470 lbs (1120 kg), Kubota BL4690 backhoe with digging depth of 90.2" (2290 mm), 72" rear-mount RCR72-CA finish mower, and L372CA rotary cutter.

Engine Model Kubota V2203-EHA
Engine Type 4-cycle, vertical, 4-cylinder indirect injection diesel
Number of Cylinders 4
Displacement, cu in (L) 134.1 (2.197)
Engine Bore, in (mm) 3.40 (87.0)
Engine Stroke, in (mm) 3.60 (92.4)
Aspiration Natural
Rated Engine Power, hp (kW) 46.0 (34.3)
Rated Engine Speed, rpm 2700
Compression Ratio 23:1
Firing Order 1-3-4-2
Fuel System Indirect injection
Injection Pump Bosch Type
Lubricating system Forced Lubrication by Pump
Cooling system Pressurized
Fuel Tank Capacity, gal (L) 9.2 (35.0)
Oil Capacity, qts (L) 8.0 (7.6)
Coolant Capacity, qts (L) 7.9 (7.5)
Electrical System Rating, Volts 12
Alternator Rating, Amps 40/55
Starting System Electric Starter
Battery Rating, CCA 447

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 37.5 (28.0)
PTO Clutch Overruning clutch
PTO Shaft 6-Splines (1-3/8)
Rear PTO Speed, rpm 540
Rear PTO/Engine Speed, rpm 540/2700

Standard Transmission
Transmission Type GST (Glide Shift)
Gearbox Type 8F/8R, with creeper 16F/16R
Number of Forward Gears 8 (16)
Number of Reverse Gears 8 (16)
Clutch Type Dry type single stage
Oil Capacity, qts (L) 41.3 (39.0)
Maximum Forward Speed, mph (kph) 16.7 (26.9)
Maximum Reverse Speed, mph (kph) 15.4 (24.7)

Optional Transmission
Transmission Type Hydrostatic (HST)
Number of Forward Gears Infinite (3-Range)
Number of Reverse Gears Infinite (3-Range)
Oil Capacity, qts (L) 41.3 (39.0)
Maximum Forward Speed, mph (kph) 17.3 (27.8)
Maximum Reverse Speed, mph (kph) 13.8 (22.2)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Wet disc
Front Tire Size 8.3x16
Rear Tire Size 14.9x24
Front Tread, in (mm) 50.8 (1290)
Rear Tread, in (mm) 46.5-60.8 (1180-1545)

Hydraulic System
Hydraulic System Type Open Center
Implement Pump Flow, gpm (Lpm) 9.6 (36.4)
Steering Pump Flow, gpm (Lpm) 4.8 (18.2)
Hydraulic Capacity, gal (L) 10.3 (39.0)
3-Point Hitch Category 1
Draft Sensing or Lift Control Position control
Standard Lift Capacity 24-in (600 mm) behind pin, lb (kg) 2310 (1050)
Upper Link Pin Diameter, in (mm) 0.75 (19.0)
Lower Link Pin Diameter, in (mm) 0.88 (22.4)
Lower Hitch Spacing, in (mm) 28 (718)

Dimensions and Weight
Wheelbase, in (mm) 71.5 (1815)
Overall Length, in (mm) 118.9 (3020)
Height (Cab), in (mm) 85.6 (2175)
Height (ROPS), in (mm) 84.8 (2155)
Height (Steering Wheel), in (mm) 60.4 (1535)
Overall Width, in (mm) 62.4 (1580)
Ground Clearance, in (mm) 15 (380)
Turning Radius, in (mm) 106.7 (2700)
Weight (Cab), lb (kg) 3650 (1655)
Weight (ROPS, GST), lb (kg) 3180 (1440)
Weight (ROPS, HST), lb (kg) 3200 (1450)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294