________________________________________________________________________________________
Kubota M126X Maintenance
The
Kubota M126X is a 4-wheel drive row crop tractor. This model was manufactured
between 2009 and 2014. The Kubota M126X tractor is powered by 373.7 cu.in (6.1
L) Kubota V6108-TI-CRS 4-cylinder direct injection turbocharged intercooled
diesel engine with a rated output power of 126 hp (94 kW).
The Kubota M126X is fitted with two types of transmission. 1st type:
Intelli-Shift partial powershift transmission with 16 forward and 16
reverse gears. 2nd type: Intelli-Shift Creeper transmission with 24
forward and 24 reverse gears. The maximum travel speed - 22.5 mph (36.3
km/h), maximum creeper speed - 0.7 mph (1.1 km/h). The open center
hydraulic system used a gear pump with rated fluid flow of 20.4 gpm
(77.7 lpm). The hydraulic system pressure is 196 bar (2845 psi).
The tractor is equipped with a hydrostatic power steering, hydraulic wet
disc brakes, 14.9R24 or 420/70R24 front tires, and 18.4R38 or 520/80R38
rear tires. The wheelbase is 105.9" (2680 mm). The Kubota M126X is
compatible with Kubota LA2253 loader with a 84" (2130 mm) bucket and
lift capacity to full height of 4877 lbs (2212 kg).
| Engine oil capacity, gal (L) |
3.8 (14.5) |
| Engine coolant capacity, gal (L) |
4.0 (15.0) |
| Hydraulic/transmission fluid capacity, gal (L) |
15.8 (60.0) |
| Front axle oil capacity, gal (L) |
3.45 (13.0) |
| Recommended Oil and Fluid |
| Engine oil type |
SAE 20, SAE 30, 10W-30, 15W-40. API Service category CI-4, CJ-4 |
| Engine coolant type |
Kubota Antifreeze/Coolant |
| Hydraulic/transmission fluid type |
Kubota Super UDT-2 Fluid |
| Front axle oil type |
Kubota Super UDT-2, SAE 80, SAE 80W-90 Gear Oil |
| Check hydraulic/transmission fluid level |
Every 50 hours |
| Check front axle oil level |
Every 50 hours |
| Lubricate axle hub bearings |
Every 50 hours |
| Clean engine air filter elements |
Every 100 hours |
| Check battery and clean terminals |
Every 100 hours |
| Inspect and adjust fan belt |
Every 100 hours |
| Adjust parking and service brakes |
Every 100 hours |
| Clean cab air filters |
Every 200 hours |
| Adjust toe-in |
Every 200 hours |
| Check and adjust engine idling |
Every 200 hours |
| Check power steering oil line |
Every 200 hours |
| Replace hydraulic/transmission oil filter |
Every 300 hours |
| Change engine oil |
Every 400 hours |
| Replace engine oil filter |
Every 400 hours |
| Clean water separator |
Every 400 hours |
| Change hydraulic/transmission fluid |
Every 600 hours |
| Change front axle oil |
Every 600 hours |
| Replace engine fuel filter |
Every 800 hours |
| Check and adjust valve clearance |
Every 800 hours |
| Replace primary engine air filter element |
Every 1000 hours |
| Replace secondary engine air filter element |
Every 1000 hours |
| Clean fuel injection nozzles |
Every 1500 hours |
| Flush cooling system and add new coolant |
Every 2000 hours |
| Engine oil filter part number |
HH1G0-32430 |
| Engine fuel filter part number |
HH166-43560, 1J520-43060 (Element), 1G410-43560 |
| Primary engine air filter part number |
3P300-11220 |
| Secondary engine air filter part number |
3P300-11230 (Element) |
| Cab air filter part number |
33760-50320, 3P300-11230, 52241-21650 |
| Hydraulic/transmission oil filter part number |
HH330-82630, HH520-15320 |
| Drive belt part number |
3P903-15780 |
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
