Home / Farm Tractors / Kubota Tractors / Kubota M126X

Kubota M126X Tractor

The Kubota M126X is a 4-wheel drive row crop tractor. This model was manufactured between 2009 and 2014. The Kubota M126X tractor is powered by 373.7 cu.in (6.1 L) Kubota V6108-TI-CRS 4-cylinder direct injection turbocharged intercooled diesel engine with a rated output power of 126 hp (94 kW).

The Kubota M126X is fitted with two types of transmission. 1st type: Intelli-Shift partial powershift transmission with 16 forward and 16 reverse gears. 2nd type: Intelli-Shift Creeper transmission with 24 forward and 24 reverse gears. The maximum travel speed - 22.5 mph (36.3 km/h), maximum creeper speed - 0.7 mph (1.1 km/h). The open center hydraulic system used a gear pump with rated fluid flow of 20.4 gpm (77.7 lpm). The hydraulic system pressure is 196 bar (2845 psi).

The tractor is equipped with a hydrostatic power steering, hydraulic wet disc brakes, 14.9R24 or 420/70R24 front tires, and 18.4R38 or 520/80R38 rear tires. The wheelbase is 105.9" (2680 mm). The Kubota M126X is compatible with Kubota LA2253 loader with a 84" (2130 mm) bucket and lift capacity to full height of 4877 lbs (2212 kg).

Engine Model Kubota V6108-TI-CRS
Engine Type 4-cycle, direct injection turbocharged intercooled diesel
Number of Cylinders 4
Displacement, cu in (L) 373.7 (6.1)
Engine Bore, in (mm) 4.65 (118.0)
Engine Stroke, in (mm) 5.51 (140.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 126.0 (94.0)
Rated Engine Speed, rpm 2200
Firing Order 1-3-4-2
Fuel System Type High Pressure Common Rail
Fuel System Control Electronic
Block Design Parent bore block
Emission Level Tier 4 Interim
Fuel Tank Capacity, gal (L) 50.2 (190.0)
Oil Capacity, qts (L) 15.4 (14.6)
Electrical System Rating, Volts 12
Alternator Rating, Amps 80

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 108.0 (80.5)
PTO Speed, rpm 540/1000
PTO / Engine Speed, rpm 540/2035
PTO / Engine Speed, rpm 1000/2210

Standard Transmission
Transmission Type Intelli-Shift
Gearbox Type 16F/16R, partial powershift
Number of Forward Gears 16
Number of Reverse Gears 16
Clutch Type Electro-hydraulic wet discs
Oil Capacity, qts (L) 63.2 (59.8)
Maximum Forward Speed, mph (kph) 22.5 (36.3)
Maximum Reverse Speed, mph (kph) 22.5 (36.3)

Optional Transmission
Transmission Type Intell-Shift Creeper
Gearbox Type 24F/24R
Number of Forward Gears 24
Number of Reverse Gears 24
Maximum Forward Speed, mph (kph) 0.7 (1.1)
Maximum Reverse Speed, mph (kph) 0.7 (1.1)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steering
Steering System Hydrostatic power
Brakes Type Hydraulic wet disc
Front Tire Size (Std) 14.9R24
Rear Tire Size (Std) 18.4R38
Front Tire Size (Opt) 420/70R24
Rear Tire Size (Opt) 520/80R38
Front Tread, in (mm) 69.7-73.6 (1770-1860)
Front Tread, in (mm) 62.6-82.3 (1590-2090)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 20.4 (77.7)
Steering Pump Flow, gpm (Lpm) 15.3 (57.8)
Hydraulic Pressure, Bar (psi) 196 (2845)
Hydraulic Fluid Capacity, gal (L) 15.8 (59.8)
3-Point Hitch Category 2
Draft Sensing or Lift Control Position and electronic draft control
Standard Lift Capacity at lift pin, lb (kg) 5810 (2635)
Optional Lift Capacity at lift pin, lb (kg) 9450 (4285)
Upper Link Pin Diameter, in (mm) 1.00 (25.4)
Upper Link Hole Diameter, in (mm) 1.01 (25.7)
Lower Link Pin Diameter, in (mm) 1.10 (27.9)
Lower Link Hole Diameter, in (mm) 1.13 (28.7)

Dimensions and Weight
Wheelbase, in (mm) 105.9 (2680)
Length, in (mm) 171.7 (4360)
Height, in (mm) 107.3 (2720)
Overall Width, in (mm) 89 (2260)
Ground Clearance, in (mm) 24.2 (610)
Turning Radius, in (mm) 162 (4100)
Weight, lb (kg) 10140 (4600)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294