________________________________________________________________________________________

Home / Farm Tractors / Kubota Tractors / Kubota M7-171

Kubota M7171 Tractor

The Kubota M7-171 is a four-wheel drive row-crop tractor from M7 Series. This model was manufactured from 2015 to 2018. The components of Kubota M7171 powerline system: a 374 cubic inches (6.1 L) Kubota V6108-CR 4-cylinder direct injection turbocharged liquid-cooled diesel engine with a rated power of 168 hp (125.3 kW), and 4-speed powershift transmission with 24 forward and 24 reverse gears. The maximum travel speed (forward/reverse): 24.9 mph (40 km/h) and 24.9 mph (40 km/h).

The open center hydraulic system includes a gear pump with rated fluid flow of 21 gal/min (79.5 l/min). The hydraulic pressure is 208 bar (3015 psi). The Kubota M7-171 is equipped with a hydrostatic power steering, hydraulic wet disc brakes, 14.9R28 front tyres, and 18.4R38 rear tyres. The tractor is compatible with Kubota LM2605 loader with a lift capacity of 5700 lbs (2585 kg).

Engine
Engine Model Kubota V6108-CR
Engine Type 4-Stroke 4-cylinder direct injection turbocharged diesel
Number of Cylinders 4
Displacement, cu in (L) 374 (6.10)
Engine Bore, in (mm) 4.65 (118.0)
Engine Stroke, in (mm) 5.51 (140.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 168 (125.3)
Rated Engine Speed, rpm 2200
Firing Order 1-3-4-2
Emissions Level Tier 4
Emission Control Selective catalytic reduction
Fuel System Common rail direct injection
Air Cleaner Dual dry element
Fuel Tank Capacity, gal (L) 87.2 (330.0)
Oil Capacity, qts (L) 23.3 (22.0)
Coolant Capacity, qts (L) 25.4 (24.0)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 150

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 140.0 (104.4)
PTO Clutch Hydraulic wet disc
Rear PTO Speed, rpm 540/1000/540E/1000E
Front PTO Speed, rpm 1000
Rear PTO / Engine Speed, rpm 540/2005
Rear PTO / Engine Speed, rpm 540E/1608
Rear PTO / Engine Speed, rpm 1000/1995
Rear PTO / Engine Speed, rpm 1000E/1600
Front PTO / Engine Speed, rpm 1000/1930

Transmission
Transmission Type Power shift
Gearbox Type 24F/24R, 4-speed power shift and 6-speed synchronized
Number of Forward Gears 24
Number of Reverse Gears 24
Creeper Type Standard
Number of Forward Gears (with Creeper) 40
Number of Reverse Gears (with Creeper) 40
Clutch Type Electro-hydraulic wet disc
Maximum Forward Speed, mph (kph) 24.9 (40.0)
Maximum Reverse Speed, mph (kph) 24.9 (40.0)
Maximum Forward Speed (with Creeper), mph (kph) 2.1 (3.4)
Maximum Reverse Speed (with Creeper), mph (kph) 2.3 (3.7)

Wheels and Tires
Drive Wheels 4WD 4x4
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Hydraulic wet disc
Front Tire Size 14.9R28
Rear Tire Size 18.4R38
Front Tread, in (mm) 75.4 (1910)
Rear Tread, in (mm) 72.8-120 (1850-3045)

Hydraulic System
Hydraulic System Type (Std) Open center
Hydraulic System Type (Opt) Closed center load sensing
Implement Pump Flow (Open Center), gpm (Lpm) 21.0 (79.5)
Implement Pump Flow (Closed Center), gpm (Lpm) 29.0 (109.8)
Hydraulic Pressure, Bar (psi) 208 (3015)
Number of Standard Remote Valves 3/5
3-Point Hitch Category 3/3N
Draft Sensing or Lift Control Electronic lower-link draft sensing
Rear Lift Capacity at lift pin, lb (kg) 20720 (9400)
Rear Lift Capacity 24-in (610mm) behind pin, lb (kg) 11790 (5350)
Front Lift Capacity at link end, lb (kg) 8600 (3900)
Front Lift Capacity at full height, lb (kg) 7055 (3200)

Dimensions and Weight
Wheelbase, in (mm) 107 (2710)
Length, in (mm) 188 (4770)
Height (Cab), in (mm) 119 (3020)
Overall Width, in (mm) 98.4 (2490)
Ground Clearance, in (mm) 16.1 (410)
Weight, lb (kg) 15095 (6845)

________________________________________________________________________________________

________________________________________________________________________________________

Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
KUBOTA B7500 KUBOTA L245 KUBOTA L2250 KUBOTA M4072
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294