________________________________________________________________________________________
John Deere 3033R Tractor
The
John Deere 3033R compact tractor was manufactured from 2014 to 2021. The John
Deere 3033R tractor is powered by 100.2 cu.in (1.6L) Yanmar 3TNV88 4-cycle
3-cylinder direct injection liquid-cooled diesel engine with a max output power
of 33 hp (24.6 kW).
The John Deere 3033R is fitted with two transmission options:
PowrReverser power shuttle transmission with 12 forward and 12 reverse
gears, or three-range hydrostatic transmission with infinite forward and
reverse gears. The maximum travel speed (forward and reverse): 19.1 mph
(30.6 km/h) / 18.5 mph (29.8 km/h).
The open center hydraulic system used a gear pump with a rated capacity
of 8.6 gal/min (32.7 l/min). The hydraulic system pressure is 172 bar
(2500 psi). The tractor is equipped with a hydrostatic power steering,
wet disc brakes, 7.00x14 (AG) or 27x8.50-15 (Turf) front tires, and
11.2x24 (AG) or 41x14.00-20 (Turf) rear tires. The wheel base is 68"
(1720 mm).
The John Deere 3033R is compatible with the following attachments: 60"
or 72" mid-mount 3-blade mower decks with cutting height of 1.5-6.0"
(38-127 mm) and hydraulic lifting, John Deere H160 front-end loader with
lift capacity to full height of 1360 lbs (616 kg),
John Deere H165
front-end loader with lift capacity to full height of 1598 lbs (724 kg),
John Deere 375A backhoe with 2-ft flat digging depth of 94" (2380 mm),
and John Deere 385A backhoe with maximum digging depth of 103" (2610
mm).
| Engine Model |
Yanmar 3TNV88 |
| Engine Type |
4-cycle three-cylinder direct injection liquid-cooled diesel |
| Number of Cylinders |
3 |
| Displacement, cu in (L) |
100.2 (1.642) |
| Engine Bore, in (mm) |
3.47 (88.0) |
| Engine Stroke, in (mm) |
3.54 (90.0) |
| Aspiration |
Naturally aspirated |
| Maximum Engine Power, hp (kW) |
33.0 (24.6) |
| Rated Engine Speed, rpm |
2600 |
| Low Idle Speed, rpm |
1000 |
| High Idle Speed, rpm |
2700 |
| Compression Ratio |
19.1:1 |
| Firing Order |
1-3-2 |
| Fuel System |
Direct injection |
| Lubrication System |
Forced lubrication with trochoid pump |
| Oil Filter Type |
Single element |
| Air Cleaner |
Dual dry element |
| Emission Control |
Diesel particulate filter (DPF) |
| Emission Level |
Tier 4 |
| Fuel Tank Capacity (ROPS), gal (L) |
13.5 (51.1) |
| Fuel Tank Capacity (Cab), gal (L) |
11.8 (44.5) |
| Oil Capacity, qts (L) |
4.5 (4.3) |
| Coolant Capacity (ROPS), qts (L) |
5.6 (5.3) |
| Coolant Capacity (Cab), qts (L) |
7.4 (7.0) |
| Electrical System Rating, Volts |
12 |
| Charging System |
Alternator |
| Alternator Rating, Amps |
55/75 |
| PTO Operational Type |
Independent |
| PTO Horsepower (PowrReverser), hp (kW) |
24.8 (18.5) |
| PTO Horsepower (Hydrostatic), hp (kW) |
24.3 (18.1) |
| PTO Clutch |
Electro-hydraulic |
| Rear PTO Speed, rpm |
540 |
| Mid PTO Speed, rpm |
2100 |
| Transmission Type |
PowrReverser |
| Gearbox Type |
12F/12R, power shuttle |
| Number of Forward Gears |
12 |
| Number of Reverse Gears |
12 |
| Clutch Type |
Wet disc |
| Maximum Forward Speed, mph (kph) |
19.1 (30.6) |
| Maximum Reverse Speed, mph (kph) |
19.1 (30.6) |
| Transmission Type |
Hydrostatic |
| Number of Forward Gears |
Infinite (3-range) |
| Number of Reverse Gears |
Infinite (3-range) |
| Oil Capacity, qts (L) |
27.2 (25.7) |
| Maximum Forward Speed (Low Range), mph (kph) |
4.1 (6.6) |
| Maximum Forward Speed (Medium Range), mph (kph) |
13.0 (20.9) |
| Maximum Forward Speed (High Range), mph (kph) |
18.5 (29.8) |
| Maximum Reverse Speed (Low Range), mph (kph) |
4.1 (6.6) |
| Maximum Reverse Speed (Medium Range), mph (kph) |
13.0 (20.9) |
| Maximum Reverse Speed (High Range), mph (kph) |
18.5 (29.8) |
| Drive Wheels |
4WD 4x4 |
| Steering Configuration |
Front steer |
| Steering System |
Power Steering |
| Brakes Type |
Wet disc |
| Front Tire Size (AG) |
7.00x14 |
| Rear Tire Size (AG) |
11.2x24 |
| Front Tire Size (Turf) |
27x8.50-15 |
| Rear Tire Size (Turf) |
41x14.00-20 |
| Front Tread, in (mm) |
44.9 (1140) |
| Rear Tread, in (mm) |
40.6 (1030) |
| Hydraulic System Type |
Open center |
| Implement Pump Type |
Dual gear |
| Implement Pump Flow, gpm (Lpm) |
8.6 (32.7) |
| Steering Pump Flow, gpm (Lpm) |
5.3 (20.2) |
| Hydraulic Fluid Capacity, gal (L) |
6.8 (25.7) |
| 3-Point Hitch Category |
1 |
| Draft Sensing or Lift Control |
Position control |
| Rear Lift Capacity at 24" (610mm) behind pin, lb (kg) |
2200 (1000) |
| Rear Lift Capacity at pin, lb (kg) |
2530 (1145) |
| Front Lift Capacity at 24" (610mm) behind pin, lb (kg) |
815 (370) |
| Front Lift Capacity at pin, lb (kg) |
1300 (590) |
| Wheelbase, in (mm) |
68 (1720) |
| Overall Length, in (mm) |
120.2 (3100) |
| Height (Hood), in (mm) |
57 (1440) |
| Height (ROPS), in (mm) |
93.3 (2360) |
| Height (Cab), in (mm) |
85 (2150) |
| Ground Clearance, in (mm) |
122 (300) |
| Weight (ROPS), lb (kg) |
2900 (1315) |
| Weight (Cab), lb (kg) |
3570 (1620) |
| Loader Model |
John Deere H160 |
| Maximum Lift Height at Pin, in (mm) |
90 (2285) |
| Clearance with Dumped Bucket, in (mm) |
69 (1740) |
| Reach at Maximum Height, in (mm) |
30 (760) |
| Maximum Dump Angle, deg |
43 |
| Maximum Rollback Angle, deg |
25 |
| Lift Capacity to Max Height at Pin, lbs (kg) |
1360 (617) |
| Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
1000 (453) |
| Breakout Force at Pivot Pin, lbs (kg) |
2855 (1298) |
| Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
2032 (924) |
| Bucket Width, in (mm) |
61 (1540) |
| Loader Model |
John Deere H165 |
| Maximum Lift Height at Pin, in (mm) |
102 (2590) |
| Clearance with Dumped Bucket, in (mm) |
80 (2025) |
| Reach at Maximum Height, in (mm) |
22 (560) |
| Maximum Dump Angle, deg |
41 |
| Maximum Rollback Angle, deg |
31 |
| Lift Capacity to Max Height at Pin, lbs (kg) |
1600 (725) |
| Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
1122 (510) |
| Breakout Force at Pivot Pin, lbs (kg) |
3327 (1512) |
| Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
2417 (1100) |
| Bucket Width, in (mm) |
61 (1540) |
| Backhoe Model |
John Deere 375A |
| Digging Depth (2-ft Flat), in (mm) |
94 (2380) |
| Transport Height, in (mm) |
85 (2150) |
| Reach from Swing Pivot, in (mm) |
129 (3270) |
| Loading Height, in (mm) |
68 (1720) |
| Bucket Rotation, deg |
180 |
| Swing Arc, deg |
170 |
| Bucket Digging Force, lb (kg) |
3063 (1390) |
| Dipperstick Digging Force, lb (kg) |
2040 (925) |
| Backhoe Weight, lb (kg) |
1250 (567) |
| Backhoe Model |
John Deere 385A |
| Digging Depth (2-ft Flat), in (mm) |
103 (2610) |
| Transport Height, in (mm) |
91 (2310) |
| Reach from Swing Pivot, in (mm) |
140 (3550) |
| Loading Height, in (mm) |
78 (1980) |
| Bucket Rotation, deg |
180 |
| Swing Arc, deg |
170 |
| Bucket Digging Force, lb (kg) |
3750 (1700) |
| Dipperstick Digging Force, lb (kg) |
2450 (1110) |
| Backhoe Weight, lb (kg) |
1390 (630) |
| Mower Deck Model |
John Deere 60D |
| Mower Deck Type |
Mid-mount |
| Number of Blades |
3 |
| Cutting Width, in (mm) |
60.7 (1540) |
| Overall Width, in (mm) |
75.3 (1910) |
| Cutting Height, in (mm) |
1.5-5.0 (38-127) |
| Lift System |
Hydraulic |
| Weight, lb (kg) |
324 (146) |
| Mower Deck Model |
John Deere 72D |
| Mower Deck Type |
Mid-mount |
| Number of Blades |
3 |
| Cutting Width, in (mm) |
72.8 (1840) |
| Overall Width, in (mm) |
86 (2180) |
| Cutting Height, in (mm) |
1.5-5.0 (38-127) |
| Lift System |
Hydraulic |
| Weight, lb (kg) |
345 (156) |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
| Farm Tractors Technical Specifications |
