________________________________________________________________________________________
John Deere 3033R Maintenance
The
John Deere 3033R compact tractor was manufactured from 2014 to 2021. The John
Deere 3033R tractor is powered by 100.2 cu.in (1.6L) Yanmar 3TNV88 4-cycle
3-cylinder direct injection liquid-cooled diesel engine with a max output power
of 33 hp (24.6 kW).
The John Deere 3033R is fitted with two transmission options:
PowrReverser power shuttle transmission with 12 forward and 12 reverse
gears, or three-range hydrostatic transmission with infinite forward and
reverse gears. The maximum travel speed (forward and reverse): 19.1 mph
(30.6 km/h) / 18.5 mph (29.8 km/h).
The open center hydraulic system used a gear pump with a rated capacity
of 8.6 gal/min (32.7 l/min). The hydraulic system pressure is 172 bar
(2500 psi). The tractor is equipped with a hydrostatic power steering,
wet disc brakes, 7.00x14 (AG) or 27x8.50-15 (Turf) front tires, and
11.2x24 (AG) or 41x14.00-20 (Turf) rear tires. The wheel base is 68"
(1720 mm).
The John Deere 3033R is compatible with the following attachments: 60"
or 72" mid-mount 3-blade mower decks with cutting height of 1.5-6.0"
(38-127 mm) and hydraulic lifting, John Deere H160 front-end loader with
lift capacity to full height of 1360 lbs (616 kg),
John Deere H165
front-end loader with lift capacity to full height of 1598 lbs (724 kg),
John Deere 375A backhoe with 2-ft flat digging depth of 94" (2380 mm),
and John Deere 385A backhoe with maximum digging depth of 103" (2610
mm).
Engine oil capacity, gal (L) |
1.15 (4.3) |
Engine coolant capacity (ROPS), gal (L) |
1.4 (5.3) |
Engine coolant capacity (Cab), gal (L) |
1.85 (7.0) |
Hydraulic/transmission system capacity, gal (L) |
6.8 (25.7) |
Front axle oil capacity, gal (L) |
1.25 (4.8) |
Recommended Oil and Fluid |
Engine oil type |
Plus-50, Torq-Gard Supreme, SAE 10W-40, 15W-40, 10W-30. API Service category CJ-4 |
Engine coolant type |
Cool-Gard Premix or Cool-Gard PG Premix |
Hydraulic/transmission fluid type |
JD Low Viscosity Hy-Gard, JDM J20D |
Front axle oil type |
JD Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
Check battery and clean terminals |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Check hydraulic fluid level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Clean cab fresh air filter element |
Every 50 hours |
Change engine oil |
Every 200 hours |
Replace engine oil filter |
Every 200 hours |
Check and service engine air filter elements |
Every 200 hours |
Replace cab fresh air filter element |
Every 200 hours |
Inspect and adjust alternator/fan belt |
Every 200 hours |
Change hydraulic/transmission fluid |
Every 400 hours |
Replace hydraulic/transmission filter |
Every 400 hours |
Change engine fuel filter |
Every 400 hours |
Replace primary engine air filter |
Every 600 hours |
Replace secondary engine air filter |
Every 600 hours |
Check and adjust engine idling |
Every 600 hours |
Change front axle oil |
Every 600 hours |
Adjust parking and service brakes |
Every 600 hours |
Replace cab recirculation air filter element |
Every 600 hours |
Check and adjust valve clearance |
Every 1000 hours |
Service fuel injection nozzles |
Every 2000 hours |
Flush cooling system and add new coolant |
Every 2000 hours |
Engine oil filter part number |
M806419 |
Primary fuel filter part number |
MIU802421 |
Final fuel filter part number |
MIU803127 |
Diesel particulate filter part number |
MIU803093 |
Primary engine air filter part number |
RE68048 |
Secondary engine air filter part number |
RE68049 |
Cab recirculation air filter part number |
MIU10011 |
Cab fresh air filter part number |
MIU10010 |
Hydraulic/transmission oil filter part number |
LVA13065 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |