________________________________________________________________________________________
John Deere 3038E Compact Tractor
The
John Deere 3038E is a 4-wheel drive compact utility tractor. This model was
manufactured from 2008 to 2021. The components of John Deere 3038E powerline
system: Yanmar 3TNV86T 4-cycle three-cylinder direct injection turbocharged
diesel engine and two-range hydrostatic transmission with infinite forward and
reverse gears.
A 95.7 cubic inches (1.6L) engine has a cylinder bore of 3.39" (86 mm),
piston stroke of 3.54" (90 mm), and maximum power of 36.7 hp (27.4 kW).
The maximum forward speed - 6 mph (9.7 km/h) using low range or 14.1 mph
(22.7 km/h) using high range, maximum reverse speed - 6 mph (9.7 km/h)
using low range or 13 mph (21 km/h) using high range. The open center
hydraulic system used a dual gear pump with a flow of 5.3 gpm (20.2
lpm). The hydraulic system pressure is 172 bar (2500 psi).
The John Deere 3038E is equipped with a hydrostatic power steering, wet
disc brakes, 7.00x14 (AG) or 25x8.50-14 (Industrial) front tires, and
11.2x24 (AG) or 15-19.5 (Industrial) rear tires. The wheelbase is 62.8"
(1590 mm). The tractor is compatible with a John Deere 305 front-end
loader with lift capacity to full height of 1186 lbs (537 kg), or
John
Deere D160 front-end loader with lift capacity to full height of 1186
lbs (537 kg).
Engine Model |
Yanmar 3TNV86T |
Engine Type |
4-cycle three-cylinder direct injection turbocharged diesel |
Number of Cylinders |
3 |
Displacement, cu in (L) |
95.7 (1.60) |
Engine Bore, in (mm) |
3.39 (86.0) |
Engine Stroke, in (mm) |
3.54 (90.0) |
Aspiration |
Turbocharged |
Maximum Engine Power, hp (kW) |
36.7 (27.4) |
Rated Engine Speed, rpm |
2500 |
Low Idle Speed, rpm |
1000 |
High Idle Speed, rpm |
2650 |
Compression Ratio |
19.0:1 |
Firing Order |
1-3-2 |
Fuel System |
Direct injection |
Lubrication System |
Forced lubrication with trochoid pump |
Oil Filter Type |
Single element |
Air Cleaner |
Dual dry element |
Emission Level |
Tier 4 |
Fuel Tank Capacity, gal (L) |
7.5 (28.5) |
Oil Capacity, qts (L) |
4.5 (4.3) |
Coolant Capacity, qts (L) |
5.5 (5.2) |
Electrical System Rating, Volts |
12 |
Charging System |
Alternator |
Alternator Rating, Amps |
55 |
PTO Operational Type |
Independent |
PTO Horsepower, hp (kW) |
30.0 (22.4) |
PTO Clutch |
Wet disc |
PTO Speed, rpm |
540 |
PTO / Engine Speed, rpm |
540/2500 |
Transmission Type |
Hydrostatic |
Number of Forward Gears |
Infinite (2-range) |
Number of Reverse Gears |
Infinite (2-range) |
Oil Capacity, qts (L) |
22.1 (20.8) |
Maximum Forward Speed (Low Range), mph (kph) |
6.0 (9.7) |
Maximum Forward Speed (High Range), mph (kph) |
14.1 (22.7) |
Maximum Reverse Speed (Low Range), mph (kph) |
6.0 (9.7) |
Maximum Reverse Speed (High Range), mph (kph) |
13.0 (21.0) |
Drive Wheels |
4WD 4x4 |
Steering Configuration |
Front steer |
Steering System |
Power Steering |
Brakes Type |
Wet disc |
Front Tire Size (AG) |
7.00x14 |
Rear Tire Size (AG) |
11.2x24 |
Front Tire Size (Turf) |
27x8.50-15 |
Rear Tire Size (Turf) |
41x14.00-20 |
Front Tire Size (Industrial) |
25x8.50-14 |
Rear Tire Size (Industrial) |
15-19.5 |
Hydraulic System Type |
Open center |
Implement Pump Type |
Dual gear |
Implement Pump Flow, gpm (Lpm) |
5.3 (20.2) |
Steering Pump Flow, gpm (Lpm) |
4.0 (15.0) |
Hydraulic Pressure, Bar (psi) |
172 (2500) |
Hydraulic Fluid Capacity, gal (L) |
5.5 (20.8) |
Number of Standard Remote Valves |
0/2 |
3-Point Hitch Category |
1 |
Draft Sensing or Lift Control |
Position control |
Lift Capacity at 24" (610mm) behind pin, lb (kg) |
1355 (615) |
Wheelbase, in (mm) |
62.8 (1590) |
Overall Length, in (mm) |
115.9 (2940) |
Height (ROPS), in (mm) |
95.3 (2420) |
Overall Width, in (mm) |
57 (1440) |
Ground Clearance, in (mm) |
12.7 (320) |
Weight, lb (kg) |
2265 (1027) |
Loader Model |
John Deere D160 |
Maximum Lift Height at Pin, in (mm) |
84 (2130) |
Clearance with Dumped Bucket, in (mm) |
63 (1600) |
Reach at Maximum Height, in (mm) |
24 (600) |
Maximum Dump Angle, deg |
44 |
Maximum Rollback Angle, deg |
32 |
Lift Capacity to Max Height at Pin, lbs (kg) |
1185 (537) |
Lift Capacity to Max Height at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
845 (383) |
Breakout Force at Pivot Pin, lbs (kg) |
1705 (772) |
Breakout Force at 19.7" (0.5m) Ahead of Pin, lbs (kg) |
1205 (546) |
Bucket Width, in (mm) |
61 (1540) |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |