________________________________________________________________________________________
John Deere 3038E Maintenance
The
John Deere 3038E is a 4-wheel drive compact utility tractor. This model was
manufactured from 2008 to 2021. The components of John Deere 3038E powerline
system: Yanmar 3TNV86T 4-cycle three-cylinder direct injection turbocharged
diesel engine and two-range hydrostatic transmission with infinite forward and
reverse gears.
A 95.7 cubic inches (1.6L) engine has a cylinder bore of 3.39" (86 mm),
piston stroke of 3.54" (90 mm), and maximum power of 36.7 hp (27.4 kW).
The maximum forward speed - 6 mph (9.7 km/h) using low range or 14.1 mph
(22.7 km/h) using high range, maximum reverse speed - 6 mph (9.7 km/h)
using low range or 13 mph (21 km/h) using high range. The open center
hydraulic system used a dual gear pump with a flow of 5.3 gpm (20.2
lpm). The hydraulic system pressure is 172 bar (2500 psi).
The John Deere 3038E is equipped with a hydrostatic power steering, wet
disc brakes, 7.00x14 (AG) or 25x8.50-14 (Industrial) front tires, and
11.2x24 (AG) or 15-19.5 (Industrial) rear tires. The wheelbase is 62.8"
(1590 mm). The tractor is compatible with a John Deere 305 front-end
loader with lift capacity to full height of 1186 lbs (537 kg), or
John
Deere D160 front-end loader with lift capacity to full height of 1186
lbs (537 kg).
Engine oil capacity, gal (L) |
1.1 (4.3) |
Engine coolant capacity, gal (L) |
1.4 (5.2) |
Hydraulic system capacity, gal (L) |
5.5 (21.0) |
Front axle oil capacity, gal (L) |
1.0 (3.8) |
Recommended Oil and Fluid |
Engine oil type |
Plus-50, Torq-Gard Supreme, SAE 10W-40, 15W-40, 10W-30. API Service category CJ-4 |
Engine coolant type |
Cool-Gard Premix or Cool-Gard PG Premix |
Hydraulic/transmission fluid type |
JD Low Viscosity Hy-Gard, JDM J20D |
Front axle oil type |
JD Hy-Gard, JDM J20C, Low Viscosity Hy-Gard, JDM J20D |
Check battery and clean terminals |
Every 50 hours |
Check front axle oil level |
Every 50 hours |
Check hydraulic fluid level |
Every 50 hours |
Lubricate axle hub bearings |
Every 50 hours |
Change engine oil |
Every 200 hours |
Replace engine oil filter |
Every 200 hours |
Check and service air filter elements |
Every 200 hours |
Inspect and adjust alternator/fan belt |
Every 200 hours |
Change hydraulic/transmission fluid |
Every 400 hours |
Replace hydraulic/transmission filter |
Every 400 hours |
Change engine fuel filter |
Every 400 hours |
Replace primary engine air filter |
Every 600 hours |
Replace secondary engine air filter |
Every 600 hours |
Check and adjust engine idling |
Every 600 hours |
Change front axle oil |
Every 600 hours |
Adjust parking and service brakes |
Every 600 hours |
Check and adjust valve clearance |
Every 1000 hours |
Flush cooling system and add new coolant |
Every 2000 hours |
Engine oil filter part number |
M806419 |
Engine fuel filter part number |
MIU800645, MIU803127 |
Fuel/water seperator part number |
M811032, MIU802421 |
Diesel particulate filter part number |
MIA884119 |
Primary engine air filter part number |
M131802 |
Secondary engine air filter part number |
M131803 |
Hydraulic/transmission oil filter part number |
LVA16054, LVA14703 |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Farm Tractors Technical Specifications |