Home / Farm Tractors / Kubota Tractors / Kubota MX5000

Kubota MX5000 Tractor

The Kubota MX5000 utility tractor was manufactured between 2002 and 2008. This model was designed in two versions: MX5000F (2WD) and MX5000DT (4WD). The Kubota MX5000 tractor is equipped with a 148.5 cu.in (2.4L) Kubota V2403 4-cycle vertical 4-cylinder indirect injection naturally aspirated liquid-cooled diesel engine.

The engine has a cylinder bore of 3.43" (87 mm), piston stroke of 4.04" (102 mm), and rated power of 52.2 hp (38.9 kW). The gear shift transmission includes a dry clutch and partially synchronized gearbox with 8 forward and 4 reverse gears. The maximum forward speed - 16.4 mph (26.5 kph), maximum reverse speed - 5.8 mph (9.3 kph). The open center hydraulic system used a gear pump with fluid flow rate of 9.2 gpm (34.8 lpm). The hydraulic pressure is 175 bar (2530 psi).

The 2-wheel drive models are equipped with 7.5L-15 front tires and 14.9-26 rear tires. The 9.50-16 front tires and 14.9-26 rear tires are used for tractors with 4-wheel drive. The wheel base is 71.6" (1810 mm) for models with 2WD and 71.1" (1800 mm) for models with 4WD. The MX5000 tractor is compatible with a Kubota LB702 front-end loader with lift capacity to full height of 1852 lbs (840 kg), or Kubota LA852 front-end loader with lift capacity to full height of 2470 lbs (1120 kg).

Engine Model Kubota V2403
Engine Type Vertical, 4-cycle four cylinder diesel
Number of cylinders 4
Displacement, cu in (L) 148.5 (2.43)
Engine Bore, in (mm) 3.43 (87.0)
Engine Stroke, in (mm) 4.04 (102.0)
Aspiration Natural
Rated Engine Power, hp (kW) 52.2 (38.9)
Rated Engine Speed, rpm 2700
Low Idle Speed, rpm 750-950
Compression 23.5:1
Firing Order 1-3-4-2
Fuel System Indirect injection
Injection Pump Bosch
Lubricating System Forced lubrication by trochoid pump
Air cleaner Dual dry element
Fuel Tank Capacity, gal (L) 13.2 (50.0)
Oil Capacity, qts (L) 8.0 (7.6)
Coolant Capacity, qts (L) 7.9 (7.5)
Electrical System Rating, Volts 12
Charging System Alternator

Power Take-Off
PTO Operational Type Independent
PTO Horsepower, hp (kW) 44.0 (32.8)
PTO Clutch Hydraulic wet disc
PTO Speed, rpm 540
PTO / Engine Speed, rpm 540/2700

Transmission Type Gear shift
Gearbox Type 8F/4R, partially synchronized
Number of Forward Gears 8
Number of Reverse Gears 4
Clutch Type Dry disc
Oil Capacity, qts (L) 46.6 (44.0)
Maximum Forward Speed, mph (kph) 16.4 (26.5)
Maximum Reverse Speed, mph (kph) 5.8 (9.3)

Wheels and Tires
Drive Wheels 2WD/4WD
Steering Configuration Front steer
Steering System Hydrostatic power
Brakes Type Mechanical wet disc
Front Tire Size (2WD) 7.5L-15
Rear Tire Size (2WD) 14.9-26
Front Tire Size (4WD) 9.50-16
Rear Tire Size (4WD) 14.9-26
Front Tread, in (mm) 48.8-59.6 (1230-1510)
Rear Tread, in (mm) 54.1-58.7 (1370-1490)

Hydraulic System
Hydraulic System Type Open center
Implement Pump Flow, gpm (Lpm) 9.2 (34.8)
Steering Pump Flow, gpm (Lpm) 4.8 (18.2)
Hydraulic Pressure, Bar (psi) 175 (2530)
Number of Standard Remote Valves 3
3-Point Hitch Category 1/2
Draft Sensing or Lift Control Position and draft control
Standard Lift Capacity at lift pin, lb (kg) 2860 (1300)
Standard Lift Capacity 24-in (610mm) behind pin, lb (kg) 2310 (1050)

Dimensions and Weight
Wheelbase (2WD), in (mm) 71.6 (1810)
Wheelbase (4WD), in (mm) 71.1 (1800)
Overall Length (2WD), in (mm) 132.5 (3360)
Overall Length (4WD), in (mm) 130.5 (3310)
Height, in (mm) 84.8 (2150)
Width, in (mm) 62.4 (1580)
Ground Clearance (2WD), in (mm) 15.9 (400)
Ground Clearance (4WD), in (mm) 15.2 (380)
Weight (2WD), lb (kg) 3284 (1490)
Weight (4WD), lb (kg) 3560 (1615)



Farm Tractors Technical Specifications
JD 1026R JD 3650 JD 6400 JD 7810
FORD 1320 FORD 2810 FORD 3930 FORD 5600
MF 250 MF 690 MF 3060 MF 6180
NH TC48DA NH M100 NH T7550 NH 8560
CASE IH 495 CASE IH 1255XL CASE IH 2140 CASE IH 2294